Product Review: Liqui Moly - Ceratec

  Рет қаралды 102,754

Joey's Garage

Joey's Garage

7 жыл бұрын

In this episode of Joey's Garage I attempt test the effectiveness of Liqui Moly Ceratec.
Donate: paypal.me/JoeysGarage
Email: JoeysTheMechanic@gmail.com
Twitter: @InJoeysGarage
Music by: Joey :-)
I hope you enjoyed it.

Пікірлер: 99
@rickredkey7493
@rickredkey7493 3 жыл бұрын
You had the hood up the first time. Of course there's going to be a difference
@calvinadam2
@calvinadam2 Жыл бұрын
Hahaha 😂
@user-gh3vv1xs6x
@user-gh3vv1xs6x 7 жыл бұрын
It's quiet because you closed the hood
@CarlosMiguelAlmeidaFernandes
@CarlosMiguelAlmeidaFernandes 6 жыл бұрын
Exactly!! ;)
@__________________________3322
@__________________________3322 6 жыл бұрын
قافطه ههههههه
@TheSoulOfGenius
@TheSoulOfGenius 4 жыл бұрын
Quiet *
@himokhalid8002
@himokhalid8002 4 жыл бұрын
________________________________________________ صادوه الذياااابه 😂😂🤣
@georgea.henryjr.5191
@georgea.henryjr.5191 4 жыл бұрын
Brother your comment was exactly correct!
@steveburn8125
@steveburn8125 3 жыл бұрын
I used it in my Rover 75 diesel, tick over is a little quieter and smoother, and over the last month, topping the tank up every week, have noted an approx 2mpg improvement, used to be averaging 48 (and a bit) it’s now doing 50 and a bit, small improvement, but real. Impressive
@macbrush
@macbrush 7 жыл бұрын
We've had an engine with oil sump temp up to 140+C 5 times because of a novice driver, oil pressure begin to drop considerably the next day on the way back from track, so we change the oil at the next service centre we find and check the data log. Similar thing happened before, but they all ended up seizing the engine shortly afterwards if not caught on time, even so some damage is almost certain. But with Cera Tea, that engine is still running strong with no obvious damage ever occurred. It may have been pure luck, butI am impressed, and I'll stick with Cera Tec.
@FCAutos
@FCAutos 7 жыл бұрын
Good stuff!
@felixliew5553
@felixliew5553 7 жыл бұрын
if theres a db meter to measure the engine sound...i will be great. also theres a different sound level between open hood n the hood shut. Btw.. nice vid bro
@stephenperrone8694
@stephenperrone8694 5 жыл бұрын
To be "scientific" about it you have to compare apples to apples. So why start up with the hood open and on the second test do it with the hood closed. Also should measure the sound with a meter so you have some scientific parameter to record(db's). Also, especially on an older vehicle, a significant amount of "engine" noise is from belts, pulleys etc and this stuff won't have any effect on that.
@koachs77
@koachs77 2 жыл бұрын
I think a long term test is really what we need hear , over 100,000 miles , does it help , how many times a year should you put it in , once a year , every other year , every 100,000 miles , with every oil change , etc……
@TheBimmerfan
@TheBimmerfan 6 жыл бұрын
Liqui Moly's Ceratec is great. I use it for 5 years on every oil change in my NA 240 whp BMW 323ti compact and engine's running perfect with many hours on the track.
@TheWolvesCurse
@TheWolvesCurse 6 жыл бұрын
TheBimmerfan 240whp on a 323ti? got a big ass turbo on that thing huh?
@TheBimmerfan
@TheBimmerfan 6 жыл бұрын
No, it's NA (naturally aspired).
@TheWolvesCurse
@TheWolvesCurse 6 жыл бұрын
TheBimmerfan then i call bullshit. even with decat or racing cats, m50 intakemanifold and equal length exhaustmanifold and chiptuning and higher lift camshafts you'll get a maximum of 220 hp at the crank out of an m52b25, and only if the engine is in top condition and you run premium fuel. 240 wheelhorsepower from a naturally aspirated m52b25 xD stop lying.
@TheBimmerfan
@TheBimmerfan 6 жыл бұрын
You're talking bullshit, but I have no time to lose arguing with idiots. My car has much more work done than just decat, M50 intake manifold and chip. Only the custom exhaust on my car costs more than an average condition E36 323/325/328.
@TheBimmerfan
@TheBimmerfan 6 жыл бұрын
And again you have no idea - with turbo I would go for 400whp, not for 240. These engines make this (and more!) power when FI.
@michaelvalone907
@michaelvalone907 4 жыл бұрын
Joey, do you still feel the same way since your recording of liquid moli created additive?
@MForrester
@MForrester 6 жыл бұрын
Did you notice the difference in the engine when it gets near it's redline?
@michaelgill5186
@michaelgill5186 4 жыл бұрын
I use it in my Maxima VQ30DE sooooo smooth soooo quiet at 200,000 ks , also in my BMW M50 engine also 200,000 ks , i also use top quality Synthetic oils , but i know from my experience the Ceratec does make the engine idle smoother , cams shoe NO wear marks after 200,000 ks in both cars
@coolnikish
@coolnikish 7 жыл бұрын
its supposed to feel smooth rather than quite so judging based on loudness is not correct.
@abhinegi1007
@abhinegi1007 3 ай бұрын
I also used ceratec but i felt that initially there isnt a much difference but when the car crosses 1000km you will feel the smoothness in engine.
@derekkirwin5245
@derekkirwin5245 3 жыл бұрын
Before you added the adfive in a ran the engine you had the hood up in second part of the video the hood was down which will dull some of the noise
@mokhtarmohamad235
@mokhtarmohamad235 6 жыл бұрын
Very funny...opened & closed test. Big different.
@SailorDickChannel
@SailorDickChannel 6 жыл бұрын
Was the initial start a cold start? That’s going to be louder. Comparisons should be made at running temp.
@JoeysGarage
@JoeysGarage 6 жыл бұрын
+Third Coast Sailing No it was a warm start both times. And thanks for watching. I wanted to try a review, and subjective ones, feels like, sounds like, are super hard to do
@loopba
@loopba 2 жыл бұрын
agree, working for me also in turno engine w 61k miles
@lcmotor
@lcmotor 5 жыл бұрын
Según lo que he investigado: Es un compuesto cerámico sintético a base de nitruro de boro, que forma una estructura molecular hexagonal una vez combinado con el aceite y sometido a temperatura nominal de funcionamiento del motor. Lo que hace, es sellar a nivel microscópico las imperfecciones en las superficies de contacto del motor que requieren lubricación, creando una película de 0.5µm, incrementando su resistencia a la temperatura, reduciendo la deformación progresiva de los materiales que incrementan la fricción y desgaste de las piezas del motor.
@johnnyesleo
@johnnyesleo 5 жыл бұрын
Hay algo que no entiendo, mi auto se lleva 7 cuartos de aceite, eso son mas o menos 6 litros de aceite de motor, tengo que poner los 6 litros + los 300 ml del ceratec o tengo que restar la cantidad de producto del total de aceite que le suelo poner a mi auto?
@metatronmen2431
@metatronmen2431 4 жыл бұрын
Is very little or none information about Ceratec and GDI turbocharged engines, perhaps more you add to the oil more stuff can buildup in the intake valves?.
@khalilrazak6486
@khalilrazak6486 4 жыл бұрын
You had the hood open before and closed after.
@Birdfeeder795
@Birdfeeder795 5 жыл бұрын
Here is a test for you. 1. Do an injector cleaning with Liqui Moly diesel purge. 2. Do an engine flush with Liqui Moly. 3. Change filter and flush with cheap oil. 4. Change filter and use the best Liqui Moly engine oil. 5. Ad Liqui Moly Ceratech. I promise you, your car will be like new. Do a test run after the diesel purge before oil change too feel the difference.
@latchezarkaraivanov6007
@latchezarkaraivanov6007 3 жыл бұрын
On the video with out product , the hood of the engine is open . Not on the second one, maybe that’s why the engine is a little quieter?
@Rendy.A.Nugraha
@Rendy.A.Nugraha 4 жыл бұрын
The colour like a cappucino 😂
@roobertyo100
@roobertyo100 Жыл бұрын
Open tge bonnet!! Will be louder!🤣🤣
@aviationshchannel256
@aviationshchannel256 2 жыл бұрын
Do we need to remove the oil like 200ml to 300 ml to addup this?
@calvink3081
@calvink3081 7 жыл бұрын
Adjust your valves if you want a quiet engine. This is just suppose to give it better engine wear...something that isnt measurable without an oil analysis.
@donaldgrump3343
@donaldgrump3343 7 ай бұрын
Yeah he should have kept the hood open for the viewers. He just said driving around was smoother than before. We will not know.
@sherveenharipersad9912
@sherveenharipersad9912 Жыл бұрын
How about opening the hood for the after Ceratec comparison Einstein?
@JustifyJustin
@JustifyJustin 7 жыл бұрын
I hope you read the instructions... 300ml to 5 liters oil... ;)
@reesespieces305
@reesespieces305 3 жыл бұрын
So you can't pour the whole thing of ceratec into the motor oil?
@JustifyJustin
@JustifyJustin 3 жыл бұрын
@@reesespieces305 It all depends on your engine oil capacity. It is made to work optimally according to a ratio provided on the bottle. In the same way you wouldn't drink concentrated cooldrink.
@reesespieces305
@reesespieces305 3 жыл бұрын
@@JustifyJustin my car takes 5 quarts of oil
@JustifyJustin
@JustifyJustin 3 жыл бұрын
@@reesespieces305 One bottle Ceratec treats 5 liters motor oil (I believe quarts and liters are close enough to be the same). Just remember not to overfill your oil. That stated ratio doesn't mean add one bottle to five liters, otherwise you'll have 5.3 liters in your car, which in your case will mean overfilling, which means damage to your engine. I usually subtract/drain 300ml motor oil when adding ceratec / doing my oil service.
@matthewtibbetts959
@matthewtibbetts959 2 жыл бұрын
What does it sounds like with the engine off?
@paulopereira7250
@paulopereira7250 7 жыл бұрын
K&N filter helps to save fuell..........
@rbc5304
@rbc5304 6 жыл бұрын
Paulo Pereira hi. How may i know what is the size of my air filter? Thanks
@jonathanrogers9961
@jonathanrogers9961 6 жыл бұрын
yes, but I personally don't believe they filter as well and can let stuff into your engine.
@anthonyspaniard3710
@anthonyspaniard3710 Жыл бұрын
But , your vehicle hood was down 👎 on the after ?
@keefkreator821
@keefkreator821 3 жыл бұрын
Where do I add the ceretek into.. I know its a stupid question
@alimirza3442
@alimirza3442 3 жыл бұрын
You've started the car with the bonnet shut ...
@fabiandee8178
@fabiandee8178 6 жыл бұрын
How many litres of oil did you use the bottle of ceratec with?
@johnnyesleo
@johnnyesleo 5 жыл бұрын
One bottle of Ceratec is enough for 5 litres of oil
@jonathantoribio279
@jonathantoribio279 7 жыл бұрын
Let me ask you a question, my friend. The Ceratec I have to put it in the oil change or I can put it without making the change? ..... thanks
@marzioisaya9587
@marzioisaya9587 5 жыл бұрын
after... IT work fine with fresh oil
@NavarroOne
@NavarroOne 5 жыл бұрын
Open hood, cold engine vs closed hood warm engine. DUH!
@blakedoan1568
@blakedoan1568 5 жыл бұрын
So.... did it work? So... would you recommend it? So...... what do you think?
@tauqeerahmed2769
@tauqeerahmed2769 5 жыл бұрын
so i added ceratec without shaking it first. Is it bad?
@khalliwallivlogs
@khalliwallivlogs 4 жыл бұрын
Nah it'll get shaked inside the engine 🙊
@konstantinostselios1129
@konstantinostselios1129 2 жыл бұрын
It's an old video but what is loud that's your water pump bearing
@Trenislife
@Trenislife 2 жыл бұрын
10 years old isn't old.
@TrojanStarryNight
@TrojanStarryNight 3 жыл бұрын
The before hood was open, after hood was closed WTF?
@Enpassantful
@Enpassantful 6 жыл бұрын
Still sounds like a tractor, have you tried lowering the recording volume, I know that definitely works.
@JoeysGarage
@JoeysGarage 6 жыл бұрын
Yeah. Wasn’t happy with the sound quality. I was new to these, and learned a lesson.
@aaronsmith593
@aaronsmith593 2 жыл бұрын
You need to have your hood up after Ceratec. Not a fair comparison.
@harshithasilva2669
@harshithasilva2669 4 жыл бұрын
Appreciate the effort, but this is totally invalid due to bad control of the experiment. All other variables should be held constant if you're only gonna compare "noise". Also, if the bottle says start with fresh oil, I think you should, especially if you're gonna do a review about it.
@steveroeder5361
@steveroeder5361 5 ай бұрын
This was not a test that would makee buy it.
@gabrielpop2280
@gabrielpop2280 6 жыл бұрын
Wtf my diesel is quieter )
@UhhhhhnooOOo00oO
@UhhhhhnooOOo00oO 3 жыл бұрын
The most unscientific thing I've seen....one has the hood closed and I'm not expecting Einstein to post additive videos
@stephenbeattie3986
@stephenbeattie3986 2 жыл бұрын
Lift the bonnet
@cflip7452
@cflip7452 2 жыл бұрын
Lol it sounds as loud with the hood down👎for the snake oil
@kaitlynmaggert
@kaitlynmaggert 4 жыл бұрын
awkward bud
@DELEREUSD
@DELEREUSD 7 жыл бұрын
Its a cool vid
@JoeysGarage
@JoeysGarage 7 жыл бұрын
+NEx HD Thanks for watching. Was hoping for more visual results.
@DELEREUSD
@DELEREUSD 7 жыл бұрын
Me to to be honest
@cornejansevanvuuren2496
@cornejansevanvuuren2496 2 жыл бұрын
Hahaahahahahahhahahahahahahaha
@brunofaccini5332
@brunofaccini5332 4 жыл бұрын
It's exacty same sound, even with the hood closed. Besides, engine sound does not reflect his health condition. My 130.000km cruze is running in 5w30 synthetic oil which is liquid like water. I would never add this white cream on it. Looks like a suicide. Thanks for the video anyway.
@ahbalone
@ahbalone 3 жыл бұрын
Not sure why you closed the hood but you wasted everyone's time.
Does Liqui Moly CeraTec work?  Let's find out!
10:30
Project Farm
Рет қаралды 2,2 МЛН
People Say I'm Full of Crap About Fuel Additives, Well Watch This
11:31
World’s Deadliest Obstacle Course!
28:25
MrBeast
Рет қаралды 134 МЛН
FOOLED THE GUARD🤢
00:54
INO
Рет қаралды 62 МЛН
Children deceived dad #comedy
00:19
yuzvikii_family
Рет қаралды 6 МЛН
Ceratec Liqui Moly Does it really work? Test friction
13:07
Piotr Tester
Рет қаралды 1,7 МЛН
Does Liqui Moly Engine Flush work? | Full Test & Review | Pro-line 2037
20:29
Does Liqui Moly MOS2 Work?  Let's find out!
12:09
Project Farm
Рет қаралды 1,7 МЛН
Liqui Moly Ceratec ENGINE OIL ADDITIVE - Laboratory analysis
20:22
The Motor Tavern
Рет қаралды 1,6 М.
Does Ceratec ACTUALLY FIX the infamous Mustang Tick?!?
7:03
Brandon Chin
Рет қаралды 54 М.
If You LOVE One Of These Additives, DON'T Watch This Video!
29:03
The Motor Oil Geek
Рет қаралды 705 М.
Choosing the Right Oil for Your Euro Car
16:06
ECS Tuning
Рет қаралды 403 М.
Оживляем Tiguan втайне от Ильдара!
1:12:26
Команда АП
Рет қаралды 1,4 МЛН
Холодный асфальт придумали гении
0:19
WB КОПАТЕЛЬ 2.0
Рет қаралды 12 МЛН
3 wheeler new bike fitting
0:19
Ruhul Shorts
Рет қаралды 50 МЛН
metallic body HULNA excavator truck
0:13
Excavator Technology
Рет қаралды 7 МЛН