Agree, I think having an option for automatic switching would be ideal. That way you could opt in to that behavior, or keep things the same as they are today

That can't be done with HDZero by itself, but you maybe able to use ELRS backpack functionality to achieve that? Would be interesting to implement this on the HDZero goggles...

My camera has to do like a reset when switching modes right? Wouldn't be possible in flight if so

Not possible with the VTX alone as it is a 1-way comm channel, not 2-way bidirectional like DJI/Walksnail, so no way for receiver to send SNR data back to the transmitter. But they might be able use the ELRS backpack as a back channel to the VTX (via MSP to FC, via ELRS RX) to send the SNR data to do dynamic power output. 🤔

Thank you, some things must be said. 👍

DJI is like the spoiled kid with all the expensive toys, but he insists on having control over everything we play, HDZero is the good friend who works with you to find the most fun stuff to do together.

The future is going lower and lower bandwidth and still having static?

@ clueless

@ I would say it is, for me a great direction forward, because, there are options opening up for the end user to change and customize to their own liking, and specific need.

My pleasure!

Would be cool to run 1080p60… unfortunately breakup and signal stability would be exponentially worse… I don’t see this working out… people already complain about the current breakup 😜

@@lemonsquareFPV not by doubling the bandwidth

Thanks!

For some people, that might be helpful. For you, it would be a benefit. But for me, I find that the sparkles are something that my brain leans to ignore, and I am able to see through them, kind of. But if previous data was displayed in place of the rainbow sparkles, I have a felling it would throw me off, and make it more difficult to respond to what is actually in front of my camera. (I fly a lot of fast proximity stuff - I can see how flying at altitude, or in open environments, your idea may be a more pleasant flight experience) I love your idea of being able to adjust to taste. If that were to become possible, we could have an on/off to tell the system to either show sparkles, or show previous data, if (on) then: adjust %. This is probably my favorite part about HDZero. There are so many thinkers, and problem solvers in the community.

I'm not much of a range junky, I hope someone else does though!

​@@RyanQuelletLR wing is ready for the test, only the weather isn't 😅

@@RyanQuellet it would be nice to see how much better it performs compared to what you already showed.

Very welcome

Glad to help

I'll ask

@@RyanQuellet thank you! 😊

Grayscale instead of color would make it easier to ignore, all darker shades as well so it doesn't make your pupils contract.

This would be great. Being partial colorblind, I already prefer HDZ breakup to the blurring of DJI/ws systems, it's just easier to know how bad your signal is, especially when flying in difficult areas. If the pixels were black or just grey it would be even better!

YES PLEASE! @Ryan Quellet a bit on your workflow with the ThumbPro would be nice. I am assuming GyroFlow, but do you have any secret sauce settings?

I was thinking this too. Maybe a switch on my radio that uses ELRS backpack to change goggle and vtx to 540p60 for a short period

@@RyanQuellet the breakup from the vtx while changing looks like it take a good full second though, no ?

@@metalfpv could be as short as 0.5 sec. Would have to see

Lowband is in the Utilities section of HdZero's Firmware Page. Same as the 1-Watt Unlock. Same procedure. Load the Lowband Unlock firmware, power cycle the VTX, then load the regular VTX firmware. If you're looking for more detailed instructions, you can find them in HDZero Wiki. (don't forget to use a fan), while VTX is powered on the bench, it will get hot.

Great point! I intend to try this for some indoor racing this year

@@RyanQuellet is it on the 26062023 firmware ?

Yes, low band will come to event vrx

That's coming

Could be what you need. Just one more know you can turn if needed

Low Band is outside of the ham radio frequencies. You would need some sort of FCC experimental license, which is fairly difficult to go through.

Yes, I put the nano 90 on my flywoo nano baby 20 - love that quad

Good idea

@@RyanQuellet well, it was your idea in an earlier video, I was just posing the question as you didn't specify when the LHCP antenna would be useful.

Try flashing vtx firmware again

Hi Ryan, Yes that worked. I am concerned now that if I changed it out in the field I would be screwed unable to use the stick controls and be locked out. Is it work passing the issue on? I have been dealing with Goa a fair bit from Divimath is it worth me letting him know perhaps?

Yes. Soon

@@RyanQuellet great I’ve just put one in basket on pre order been trying to find some info on them. I’m making the switch Thanks

@@RyanQuellet hey again, also, now that the goggles have been around for some time is there any movement on a V2 goggles coming?8

I just did the same... the part I can't work out is how to get the OSD back again to get into the menu to change it back... I've tried flashing the vtx firmware, plugging into betaflight and re-adding the preset... but now I'm stuck in narrowband

@@GarethDix Oh Hii Gareth, But were you able to change it now? p.s. if you're ever in the Ostschweiz hit me up, I'd love to fly with you :)

@@schweizerluchs7146 finally got it working again! And I havent flown out that way yet but glad to hear there are other pilots here in Switzerland too! I only know two others!

Yes! But not much bandwidth there.

It trips me out that someone can look at the 540p mode and say with full conviction that it looks as bad as analog.

There is water in your head as well.