Pour N Paint claims you can paint an entire room in 20 minutes and it will come out perfectly, evenly and drip free. But, does it really do that? KDKA's Lynne Hayes-Freeland reports.
Пікірлер: 150
@MBSK-xw4ff3 жыл бұрын
You're the best teacher! Thank you so much
@DeplorableOutlaw454 жыл бұрын
He was applying a ton of pressure, look at the pole bend.
@Lloyd18854 жыл бұрын
It was bending because its thin plastic
@munalemj2 жыл бұрын
Almost bought this. Thank you for the review. Too good to be true
@jon1234232 жыл бұрын
should have bought it - its him!
@sandramullen78045 жыл бұрын
I have this system. It's hard to use you need a lot of strength in your arms as you have to press hard with it. Once filled it's heavy, and not that easy to apply as you have to press hard to get the paint to get through. My system is the blue original. But it's in a box in the shed.. I prefer a normal roller. Plus. Cleaning it out afterwards. Takes way longer 🇬🇧
@angiesnipes74434 жыл бұрын
This is the best review ever.... I appreciate you guys.
@andrewedgar45004 жыл бұрын
This works amazing if you DONT use the measuring jug with the water line. You need to mix the paint separately in a bucket with much less water than advertised...the consistency is the key...different brands dilute differently.
@tomaszdebowski27946 ай бұрын
Most fair and honest test, TY :)
@outrageousgangster63914 жыл бұрын
Had the same problem with mine but I used a 12 inch roller on top to even the pain out
@looneyirish0073 жыл бұрын
applying the wrong amount of pressure can cause paint to push out around the edge of the roller, creating a streak. Also, it looks like they saturated the roller will all that water dripping down the walls.
@leannecooper74684 жыл бұрын
I’ve got one works fine for me 🤷♀️ no streaks doesn’t leak, he was putting too much pressure on it
@jasephase2k9333 жыл бұрын
Myne arrived today is defo not cheaply made if was wouldnt be hard plastic is I'n mint condition has a adapter to insert in handle Idk why is handle fell ot must have been directed before was on stage
@fidelcatsro69482 жыл бұрын
wow
@wesleyrichards80272 жыл бұрын
Worked fine for me. Love it.
@mikeroy33714 жыл бұрын
I'm sure the back roll method still needs to be applied to eliminate the streaks
@glenmiles62794 жыл бұрын
Clean up must be a nightmare also! think I’ll stick to my regular roller thanks.
@rickbeith33363 жыл бұрын
Can use it for the first coat or primer. Fast. Second coat use a regular roller.
@cstarv4 жыл бұрын
wagner paint sticks, load paint in the stick, have used for years
@shirleyaaron21693 жыл бұрын
This works fine for me. You should not add to much pressure and let the roller do the work. As what makes the paint pour is to much water has been added. You should mix the paint correctly. Not working properly is that you have made some mistakes. Correct it and use it properly it surely works well. I am a first time user not a professional at all but it did work well.
@olasunkanmiogunwo84612 жыл бұрын
If I buy the paint brush and the foam get spoil how can I get another foam or spare of the tolls
@russparadero4 жыл бұрын
I guess it'll be helpful for a newbie painter eh? just ordered it yesterday.
@terrymarriott16924 жыл бұрын
I use it constantly and it is fantastic. No problems. No cheapness.
@ihabahmed11322 жыл бұрын
The roller leaked as soon as I poured the paint it leeks outside from the bottom and the sides as well, it was a mess
@magisvita2937 Жыл бұрын
@@ihabahmed1132 how many videos are you going watch and comment the same things ? Grow up ahmed
@softballmom6954 жыл бұрын
I guess the old saying IS true...."if it sounds too good to be true, it probably is". 😉
@davidde-niro9124 жыл бұрын
You should of sprayed it on with a Decorators spray gun, it's a way better finish and is easy to use and goes on real quick.
@areenkawaii4 жыл бұрын
Yeah, is cool idea. But hard to implement.. And like some comentor say, is gonna be heavy because of the paint inside the roller. I would bought it just for the sake of experience if it's cheaper.
@DosDonts1015 жыл бұрын
If it ends up looking like crap then it doesn't matter how easy it is. LOL.
@MBSK-xw4ff3 жыл бұрын
...Great, honest review! Very helpful!.This is one of the greatest videos in human history....Thank you, great reviews...Thank you for the review.
@chelsealeck6924 жыл бұрын
You could use that and then use a standard roller to blend it all in that had no paint on it?
@deancommissioning4 жыл бұрын
Yeah but that defeats the object! I guess if you already bought it and wanna try get your money's worth.
@ChristianChua3 жыл бұрын
It worked fine for me, it was the washing that was insane, I threw it away. so , this is great for one time use,
@christofer1283 жыл бұрын
Something which constanly gives paint whenever u role it sounds like you end up with too much paint.
@ihabahmed11322 жыл бұрын
The roller leaked as soon as I poured the paint it leeks outside from the bottom and the sides as well, it was a mess
@MirandaVillegas3 жыл бұрын
You have to use them as we regularly use a dollar roller to pay back what was spent
@ceesdevrieze2 жыл бұрын
where can I buy this roller?
@tod_c_ussea2nd713 жыл бұрын
This is a joke of a review. I used this on several paint jobs I had and it works every time. I don't normal pour paint straight out of a can. You'll need to dilute the paint before applying it to the wall or it'll get streaks like that. It's the same thing with paint sprayers. The quality of the paint is also an issue sometimes.
@jasephase2k9333 жыл бұрын
Not using paint thiner or watering the paint down should have used a stick first to mix the paint then poured in I've just ordered one 😱
@novaklibor15 жыл бұрын
Measure,pour in roller, roll for 2 min on papers. I 'll be done already with regular roller 😃
@avinashsoogrim6944 жыл бұрын
and messy with splattered droplets as well, correct ?
@lizallen10824 жыл бұрын
I PAID for this over $50 and it was in April. 2020. It is June 21 and I still haven't received it. How do I get my product or money back. It says it comes from London. they chanrged me a international fee. I want my rollers or my money.
@jackwatsonepic6264 жыл бұрын
I was going to go down the town and buy one but after watching this video I don't think I'll bother I think I will stick to just getting somebody else to do it for me while I just put the kettle on and offer them a biscuit to me that works better than ,,this,, I mean someone with cash in hand not some professional out the paper, who will charge you a small fortune lol
@leedsman545 жыл бұрын
I bought a similar one,Paint Runner. Save your money.
@theodorev6664 жыл бұрын
I was about to get one. Is it not worth it?
@deancommissioning4 жыл бұрын
@@theodorev666 you won't find a good review of the runner pro anywhere. Save your money!
@colinc45422 жыл бұрын
They didn't use it properly. I've used these as 'disposables' to paint ceilings and internal walls and external walls. It's quick and if done right doesn't drip. Uses far less paint too. The quality of the tool itself is crap so after a few big jobs .the roller material can start to split a bit, but given the coverage, lack of mess and time savings it's worth it and economical. Just treat it as an item to be disposed of after a few jobs and you'll be fine.
@blackdragonstory11229 ай бұрын
I dont get why they dont just make the thing from better materials. The old rollers would instantly go extinct. I bought one of these and it broke on the first use. How would anyone know you are not supposed to press and how would you even be able to do that considering the thing holding the roller is bending and even the poles are also bending. I managed to do 1 coat of paint and and then it started leaking from the side cuz the fabric came out of the plastic part. But before that like after celling and a wall,the pole broke where it was connected to the roller and since the size is not like any other similar tool I couldnt even replace it. In essence just better materials,being able to dissassemble the thing to clean it faster and maybe a longer handle even if its 3 pieces like now would be great. The angle one didnt survive 1 fall lel. Idk why the handle of it came out of it but the result was broken plastic.
@peanutgallery01422 жыл бұрын
How much pressure you apply makes all the difference.
@gorankracunovic77123 жыл бұрын
Kako da narucim
@aminas_garden4 жыл бұрын
I bought one it broke as soon as I started Paintin am very disappointed
@hamzahusayin79812 жыл бұрын
كيف احصل عليها للتسويق
@bigro21534 жыл бұрын
Everything worked in there except the guy doing it. He had no clue what the hell he was doing so course it's not going to work
@sergiuraul11964 жыл бұрын
Use it after you wash it :))
@Dixie3454 жыл бұрын
So its not fit for purpose
@sarahcoffeyjones59215 жыл бұрын
Just watch, "Vivian Tries"! 👩👩👩👩
@alepau295 жыл бұрын
Sarah Coffey i just came from there haha that was like my worse nightmare.
@opalwarford21805 жыл бұрын
Vivian didn't follow all the directions: wet the roller and squeeze out excess water. That keeps the paint from running out like it did.
@ademaiden-Cinematography39704 жыл бұрын
Guessing the streaks are a result of using water from the start
@user-ne9wp8ve5u4 жыл бұрын
I’m a remodeler and I would never buy junk like this. The best thing to do is get good rollers and brushes. Also get quality paint.
@cafazm93704 жыл бұрын
Bad Quality ,I have one and do not work well
@ChocolateMelanin4 жыл бұрын
I bought one yesterday 🙄🙄🙄 I used it today 🤦🏾♀️ Taking it back to the shop tomorrow to get a refund 😫😫😫😫 Absolutely waste of time & money 💰
@aminas_garden4 жыл бұрын
Mine broke just as I started using wat a waste of money
@stefkolner15842 жыл бұрын
For my profession I am in contact with various paint manufacturers, where I sell raw materials that are used in paints, inks, lacquers, etc. Every brand and every type of paint that is brought on the market has been specifically formulated ready for use. Only in very hot conditions it could be that some water is added, which is often only done by professionals. All paints are already perfect in balance with the right amount of resin, water, pigments and additives such as anti-foaming, leveling agents (to give a better flow when the paint is wet), and very important for wall paints are the thickeners; or to be more precise 'rheology modifiers'. If you add water to the paint under normal conditions, you will bring the entire system out of balance. This results in dripping, lower color strength (you are diluting your paint so very likely that you have to apply more than 1 layer) and even secondary issues such as sagging (pigments and fillers sag out over time when the paint is still wet and creates an irregular film), and it also expires more quickly. My advice for the DIY people: Buy quality paint and quality rollers, brushes and containers. You will see that it will cover just as good, possibly even better than these heavily overpriced 'magic paint rollers'.
@mobilephone63888 ай бұрын
Who endorsed this video?
@grahamd47645 жыл бұрын
If you feel the need to buy one of these; then you obviously can't paint walls using the proper tools. On that basis just get a decorator in to do the job properly.
@AA-wv1pr5 жыл бұрын
Graham D lol your decorator business failing ?
@irmadudink85105 жыл бұрын
Dylan haegens?
@howlis2 жыл бұрын
I've yet to see anyone clean one of these things.
@lechat85334 жыл бұрын
The "painter" is useless. I have it and it works just fine :)
@john26hanson4 жыл бұрын
If the paint "runs" and is causing streaking, then you are using a poor quality paint. Years ago we used DuPont Latex paint; it was thick and did not "run" or leave streaks.
@blackdragonstory11229 ай бұрын
I would bet the non plastic part came off a bit and it leaked paint just like mine. Later on I pulled it all out thinking maybe its supposed to come off for cleaning it easier but so far havent figured out how to do it lel. This product is a good idea but poorly executed. Cheapest materials you can find,bad balance between the roller and the thing that is holding it,even the plastic covers would have been much better if they were not portruding like they are but instead are a bit in the roller even if they had to make the whole roller a bit longer and thinner for it to work. Cant comment on the angle one cuz it fell from my hands and broke. 2m fall and it broke....
@romanphoto11965 жыл бұрын
i think you got maybe copy one because the real one is Blue colour one
@romanphoto11965 жыл бұрын
Hi everyone i already used last month blue one from Argos its good to paint save paint but looks very BAD my wall lanes on roof and wall esvelve and plus riped so fast i already change and the second one is again riped rubish quality the roller edges one is nice thumbs up for that but corner is ok but makes black lanes so 50 50 . In feature a use only edges one bad on walls i will use old style nice paint and cover no lanes good luck God bless all in Jesus name
@adambarnes21365 жыл бұрын
Those marks on the wall from the roller is down the the way the guy applied pressure on the roller. This will happen with even the most expensive professional rollers if too much pressure is applied to one side and not evenly throughout the roller. This comes from a professional decorator. Definitely cant blame to roller for those running streaks. Doesnt matter which tool you use if the paint isn't applied evenly and correctly it will look shit regardless.
@wbangca5 жыл бұрын
Chris Johnson I was going to say the same thing about the smaller roller breaking. The product is made out of plastic and he’s applying his entire body weight onto it when he’s on the ground. Also nobody paints like him pushing the roller at that angle down like crazy until it breaks. People stand at a distance and then let the roller go up and down he is like fully force idiot pressing his body on it until it breaks.
@outrageousgangster63914 жыл бұрын
Can't smooth out wene paint is in roller
@georgeegroeg64822 жыл бұрын
Some people just aren’t made for labor and it shows
@aneri322310 ай бұрын
😊
@Randomguy-b5r5 жыл бұрын
The streaks are because you can't paint a wall professionally!
@parisenarabealshaibi59824 жыл бұрын
J'ai acheté 35 EUR pas bien
@Consabre Жыл бұрын
Lol was just about to buy this and didnt thanks to this vid.
@ivarrtheboneless91045 жыл бұрын
Saw the Paintrunner Pro advertised on TV channel last week. Would not buy one now after seeing this and similar KZfaq videos reporting poor results. I worked in Injection Moulding in Plastics for over 30yrs and would be embarrassed if the product went into my work bin looking like that. Poor quality control methods with a 'That will do' attitude. To be fair there was a 30 day money back guarantee if not satisfied, but you paid return postage so it made it economically senseless to go to the bother of cleaning the product up,repacking it and then taking it to the post office. I suspect these all end up in the refuse bin after a few weeks. Be very surprised if this product is for sale in eighteen months time.
@stanleymoore80845 жыл бұрын
More crap to buy and dump in land fill disgraceful
@fatyowls5 жыл бұрын
That's the best description for this pile of shit!
@geoffreyrawlings97364 жыл бұрын
Pour it straight to the dustbin.
@romanphoto11965 жыл бұрын
Make good job save time but roller but quality and ripped , for edges is make good job but cornet is but
@razzia74474 жыл бұрын
whole load of rubbish just wasting your money, i bought mine couple of years ago the paint wouldn't come out evenly. Dont waste your time and money just invest in a roller.
@adrianduma42644 жыл бұрын
There's too much acting in this 😂
@1kenpau14 жыл бұрын
Just use a Wagner pour and spray
@soto64114 жыл бұрын
Why are they putting water on the roller? Course its gonna drip you don’t wet a standard roller lol 🤦♂️
@nikolejames37474 жыл бұрын
soto the instruction say to wet it
@soto64114 жыл бұрын
Nikole James you don’t need to wet it the water in the paint will do that, i watched a video on this and he didn’t wet it and it came out perfectly n he was a painter and decorator
@TheM2754 жыл бұрын
This is nearly as cringy as the ad. No drop sheets
@HektorBandimar2 жыл бұрын
I don't think I'll buy one of those, it's a shame because it's a good idea, but it obviously doesn't work, the quality of the roller didn't seem that good either.
@gungner61663 жыл бұрын
Thought it was Bald and bankrupt in the thumbnail
@tomcurley61234 жыл бұрын
does not work leaves streaks and broke handle rubbish
@greatergeneral42844 жыл бұрын
Pressing way to hard
@MarioR234 жыл бұрын
Never trust as seen on TV items
@jasephase2k93326 күн бұрын
Simlar to painter pro is not in production no more & is even cheap the flat cap even fell off cant use thick paints has to be watered down
@paulmcgrath52594 жыл бұрын
Have just used this product on my bathroom, believe me its a load of rubbish compared to a traditional roller it dosnt release enough paint even when you push harder its cleaner to use but end result, to put it mildly is crap.
@JoelMorton5 жыл бұрын
Any roller that doesn't allow you to backroll aka smooth out what you just applied is garbage.
@iriskeniafernandez4 жыл бұрын
Thank you!!!!! I will not be buying this
@mancube76455 жыл бұрын
Holy crap, soo disappointed.
@johoro25103 жыл бұрын
Ten váleček je pěkný zmetek!!!
@uilmaramachadodemelo24165 жыл бұрын
QUE HORROR, achei que só no Brasil existiam essas tretas!!!!!!!!!!
@ace313mh4 жыл бұрын
Nothing's perfect ijs
@BathroomSolutions15 жыл бұрын
What was running was the excess water in the roller. As a bathroom remodeler, I paint a LOT. I Cannot imagine why you would have to wet the roller first. In essence, they are making you dilute the paint so it flows through the roller. Stupid! Junk product and not well thought out.
@Jasoninee5 жыл бұрын
Ummmmm.... that is the recommended way to use like all rollers... defuzz and prewet with the base of the paint.
@BathroomSolutions15 жыл бұрын
Jasoninee You never prewet a roller with WATER. You prewet with paint only. Maybe we are not on the same page 😀
@Jasoninee5 жыл бұрын
@@BathroomSolutions1 Just a quick example... from a paint manufacturer nonetheless: kellymoore.com/homeowner/faqs/#sub11 Look at paint roller tips
@Jasoninee5 жыл бұрын
@@BathroomSolutions1 Going right into the paint works eventually, but it will be quite a bit of crappy, wasted, and different looking paint for a little while. Guess what soaks into a dry roller very fast? Water.... gues what is in water based paint? Water... the dry roller quickly soaks up the water out of the paint into the center and now you are rolling concentrated solids for a little bit. A prewet roller when properly just left damp does not do this.. there is only upside when done correctly. Leave too much of the water/mineral spirits and well yea duh it isnt good when you are literally painting out the paint's solvent. Just damp where the paint only comes out and it is nothing but good.
@Jasoninee5 жыл бұрын
@@BathroomSolutions1 Sorry I forgot to do all capitals whenever I typed out WATER.
@mikesneg45183 жыл бұрын
Coming from a painter as a proffesion. This is a joke ahaha
@pyromaniac3545 жыл бұрын
More plastic crap to go in the landfill
@toadtoadersson22394 жыл бұрын
Weird 'infomercial' channel. Bizarre.
@TheM2755 жыл бұрын
Absolute rubbish... he put it on way too thick as well
@zulfikranzulmos4066 Жыл бұрын
Damn surely he's lazy to use proper roller
@jabowja Жыл бұрын
It worked for me he’s pressing to hard
@jasephase2k9333 жыл бұрын
Was roller washed before use dryed not using a air dryer before use not using new.s paper print go straight to wall or using to much pressure to many false review.s that is bollocks
@bebes30352 жыл бұрын
I really hated 😡 I waisted my money, my time and my paint. No bueno.
@anthonyodey89973 жыл бұрын
It does spray, and the fact that you have ti roll it for a couple of minutes first is ridiculous
@zulfikranzulmos4066 Жыл бұрын
It's faster to use proper roller if u know how to.. No need to be perfect atleast ur not lazy as this guy is 😂😂
@deebest42025 жыл бұрын
I nearly cried laughing when I saw this on TV, the guy climbing up the ladder to roll that small square patch on the wall. At first I thought it was a kind of funny advertisement. I thought they a never going to sell that rubbish, People are not that easily fooled. Time consuming, 💯 percent crap. This kind of false advertising should be and shut down. What a con.
@aminegasmi61273 жыл бұрын
Prodotto inutile
@seawinds125 жыл бұрын
Crap
@mghc74 жыл бұрын
Of course it went on fast you didn’t cut in the fucking wall also if you use cheap paint it’s go to spray more.. come on people common sense
@HarviValiente4 жыл бұрын
My dad bought this yesterday, guess what? It broke easily 🤣🤣🤣🤣 waste of money