Does Temu Have Any High Quality Woodworking Tools?
Рет қаралды 44,747
Күн бұрынIf you're in the market for high-end woodworking tools, you might be wondering if Temu has what you need. Watch this video to find out!
Thank you to Ekster for sponsoring this video:
Please visit the following link and use the coupon code: FLYNNDOGG to recieve 35% off of your purchase!
partner.ekster.com/FlynndoggW...
CODE: FLYNNDOGG
Please check out the new website for links to shirts, tool recommendations and much more!
WWW.FLYNNDOGGWOODWORK.COM
To check out any of the tools featured in this video, please visit the affiliate links below:
- "Romantic Walks" T-Shirt - www.flynndoggwoodwork.com/shop
- Juice Groove Jig -
Temu Link - temu.to/m/uwuzo90gvrr
Amazon Link - amzn.to/3VOdHWd
- Matchfit Clamps - amzn.to/3U3qUt0
- Dewalt Router - amzn.to/3U5EYCd
- Groove Router Bit - amzn.to/43LOYUq
- Festool Dust Collector - amzn.to/3J48bHE
- 2 in 1 Woodworking Scribe Set -
Temu Link - Not Available
Amazon Link (similar) - amzn.to/3U5BeAP
- Paolini Pocket Rule - amzn.to/49vKKlc
- Swanson Combination Ruler - amzn.to/3U5Ag7x
- NicPro Pencil - amzn.to/4cJEgSG
- Table Saw Gauge -
Temu Link - Not Available
Amazon Link (what I would get) - amzn.to/49GEKGB
- Saw Stop 3HP PCS Table Saw - amzn.to/4almeV3
- Aluminum Alloy Woodworking Square -
Temu Link (similar) - temu.to/m/uq5prm3gnq7
Amazon Link - amzn.to/3vDbySN
- MFT Clamps -
Temu Link - Not Available
Amazon Link (similar) - amzn.to/3VOWQTs
- Microjig Clamps - amzn.to/3xqvqsM
- Festool Clamps - amzn.to/4akbGWg
- Round Rubber Mallet
Temu Link - Not Available
Amazon Link (actually rubber) - amzn.to/4b1rBcf
- Carbid Lathe Tips -
Temu Link - Not Available
Amazon Link - amzn.to/49r0ndL
- Vevor Lathe Tools - amzn.to/3J7W8ZN
- Juice Groove Clamps -
Temu Link - Not Available
Amazon Link - amzn.to/3xhHht1
General Temu Link -
Temu claims they will give a $100 bonus if you order through this link:
temu.to/m/u51m04agur1
Video Chapters:
00:00 - Introduction
01:59 - Packages
02:44 - Juice Groove Jig
05:25 - Ekster Wallets
07:09 - 2 in 1 Woodworking Scribe Set
10:09 - Table Saw Gauge
12:48 - Aluminum Alloy Woodworking Square
15:04 - MFT Clamps
16:33 - "Rubber" Mallet
18:02 - Carbid Lathe Tips
20:12 - Juice Groove Jig Clamps
21:33 - Closing
My favorite tools you might see in my shop:
Major Tools:
Jet Bandsaw - amzn.to/3IhIvHP
Nova Voyager Drill Press - amzn.to/446gHhH
SawStop 3HP - amzn.to/3XeN9dL
DeWalt Table Saw - amzn.to/3YuRWsU
Festool Kapex - amzn.to/3JNvYNG
Dewalt Compound Miter Saw - amzn.to/3JLyxj3
Jet 8'' Jointer - amzn.to/3I1NGvf
DeWalt Thickness Planer - amzn.to/3X91dWg
Shelix Cutterhead for DeWalt Planer
DeWalt Router - amzn.to/3Ypl84o
Bosch 2.25HP Router (In Router Table) - amzn.to/40TeIfD
Kreg Router Table - amzn.to/3ljpbkg
Kreg Router Lift - amzn.to/3liJMFK
Festool Cordless Track Saw - amzn.to/3DKiFtk
Festool Router - amzn.to/40LHL4B
Festool Carvex - amzn.to/43h1zyv
Shaper Origin - amzn.to/41fO3cq
Shaper Workstation - amzn.to/418VqlS
Measuring/Marking
Woodpeckers 642 Square - amzn.to/3wY94vl
FatBoy Pencil - amzn.to/3IxstIK
Woodpeckers TS 32 T-Square - amzn.to/3Gvmx2H
Paolini Pocket Rule - amzn.to/4194fw6
1-2-3 Block - amzn.to/3A2CRUY
Finishing/Sanding
Festool 5'' Sander - amzn.to/3RC4a0o
Festool 6'' Sander - amzn.to/3jD7coG
Rigid Oscillating Belt/Spindle Sander - amzn.to/3MCGjNw
Jet 1632 Drum Sander - amzn.to/40RXejN
Joinery
Self Centering Dowling Jig - amzn.to/3Xaapd7
Kreg Pocket Hole Jig - amzn.to/40Ksf9E
Festool Domino Joiner - amzn.to/3YaqG32
Drills/Drivers/Nailers:
Festool Impact Driver and Drill Kit - amzn.to/3RBgga6
Ryobi Brad Nailer - amzn.to/3jyBCsf
Festool Compact Drill - amzn.to/3ZONw0d
Thanks for watching! :)
#flynndoggwoodwork
#woodworking
#amazingtools
#woodworkingfun
#woodworkinghacks
#woodworkingtips
#beginningwoodworking
#toolreview
#diy
#easywoodworking
#woodworkinghacks
#woodshop
#woodworkinggadgets
#gadgets
#reaction
#cheaptools
#affordabletools
#chinatools
#newtools
#toolreaction
#temuhaul
#temuhaul2024
#temuwoodworking
#temufinds
#festool
#juicegroovejig
#clamps
#tablesawgauge
#tablesawsetup
#woodpeckerstools
#woodpeckers
#paolinipocketrule
#pocketrule
#microjig
#matchfit
#lathetools
#carbidelathetools
#carbidtips
#carbide
@a9ball1 Ай бұрын
I understand that most viewers like Bert but I would prefer he went to the wood shed and stayed.
@FlynndoggWoodwork Ай бұрын
I hear you. Thanks for watching a9ball!
@DuanePolega Ай бұрын
I agree. Kind of lowers the quality of the video.
@patrickflynn-fk8mu Ай бұрын
Thanks for the feedback!
@jhenderson4078 Ай бұрын
Agreed.
@terencefranks1688 Ай бұрын
his commentary is too drawn out & boring !
@tatehogan5685 Ай бұрын
Quick note on the table saw gauge, when checking blade alignment to the miter slot you are only validating blade trueness when leaving the gauge stationary and rotating the blade. To check the blade to slot, start at the front of blade then slide the gauge to back of blade. Reference the same tooth in the blade for best accuracy. I have been enjoying your channel. Keep up the good work!
@FlynndoggWoodwork Ай бұрын
Thanks for sharing that Tate, really appreciate it! Thank you so much fro watching and your kind words!
@georgelavelle2097 Ай бұрын
The mallet is actually good. You're mistaken for what it is used for. It's hard and smaller in size because it's used in combination with chisels. Now you know!😅
@FlynndoggWoodwork Ай бұрын
Hey! Thanks for pointing that out! Now I know! :). I guess I was mistaken on what i thought I was ordering. Happens a lot on that website! Thanks for sharing and watching George!
@maciej9280 Ай бұрын
yeah its best used with carving chisels
@scottdeeslcutusa8117 Ай бұрын
Thanks for the reviews
@FlynndoggWoodwork Ай бұрын
Thank you for watching Scott!
@FlynndoggWoodwork Ай бұрын
Haha! I agree and great idea. I’ve had a lot of fun making those shirts!
@robertkerby2581 Ай бұрын
Great idea on the Temu Purchases! Well done!
@FlynndoggWoodwork Ай бұрын
Thanks so much Robert! I appreciate you watching! :)
@jimrosson6702 Ай бұрын
lol another great video Bryan just can’t get myself to order anything from there love Burt’s scoring system. But I will say I have ordered 2or 3 things now from going makes off Amazon and love the quality of the product so far and got a few more items I will order as soon as I save up the money. Thanks for sharing Bryan. Hope you have a great weekend.
@FlynndoggWoodwork Ай бұрын
Haha! Thanks as always for watching Jim! I'm actually doing another goingmake video sometime soon. I just got a bunch more of their tools to check out so stay tuned! :)
@a9ball1 Ай бұрын
I wanted to give you a big shout out for answering comments. I subscribe to a ton of channels and it just feels right when the channel owners say something in the comments. I feel like they are actually reading them instead of just saying that they do. ⭐
@FlynndoggWoodwork Ай бұрын
Haha! I appreciate that a9ball. I read every single one! :). I think it's important, and I learn a lot from reading them. Lots of good suggestions out there!
@robertchambers4466 Ай бұрын
Haven't got anything from there yet got a friend who has over a month ago and hasn't gotten his stuff, so I'll wait and see how long it will take. The Going Make tools I got are great. Thanks for showing us these tools and another great video
@FlynndoggWoodwork Ай бұрын
Yeah, it really is a crap shoot with getting your tools from these sites. I prefer amazon, you can still find some similar priced items on amazon as well! Glad you like the Goingmake tools. I’m a big fan. I’m actually getting ready to do a video on some of their other tools here in the next couple of weeks so stay tuned. Thanks so much for watching Robert!
@LordHog Ай бұрын
Thanks for sharing. I have wanted to get a table saw set up gauge and that looks to be a good enough one for my few times a year that I use my table saw. Tell Burt we said hi.
@FlynndoggWoodwork Ай бұрын
Haha! Burt says hello LordHog! Thanks as always for watching!
@TheTonysean Ай бұрын
The mallet is used for leatherworking. Great video as usual. 👍🏼👍🏼👍🏼
@FlynndoggWoodwork Ай бұрын
Yep, I agree. That and possibly chisels? Either way, it is classified under their woodworking tools for some reason. :(
@byronshepherd8415 Күн бұрын
that's how amazon sends me all my rulers
@FlynndoggWoodwork 14 сағат бұрын
Really? 99% of the items I get from amazon are packed very well. Thanks for watching!
@byronshepherd8415 10 сағат бұрын
@@FlynndoggWoodwork maybe I should start a KZfaq channel and Bezos won't see me as one of the abusable peasants.
@kwiebje24 Ай бұрын
You’re t-shirt is great 😂
@FlynndoggWoodwork Ай бұрын
Haha! Thanks so much! :). If you are interested I sell them on my website! www.flynndoggwoodwork.com
@toonybrain Ай бұрын
“Luckily I remembered what this tool was….” 😆 Love that sweatshirt. I would have to modify it to read “hardWOOD store”: nothing serves as catnip to me more than a warehouse filled with domestic and exotic, rough-cut lumber and live edge slabs. 🧡
@FlynndoggWoodwork Ай бұрын
Haha! Great idea toonybrain! really appreciate it and thanks for watching! Great idea!
@darrylbuckett5380 15 күн бұрын
You show that juice groove jig at $20 US, here in Aus the Temu site shows it at $78, which is more than double the US price. Cheers for a great video.
@FlynndoggWoodwork 14 күн бұрын
Oh my! That's seems like robbery! Especially on Temu. I'd be heading to amazon before spending that much on temu! Thanks so much for sharing and watching Darrylbuckett!
@richardanderson1152 Ай бұрын
Te-wo wo thanks burt for your input tops as always
@FlynndoggWoodwork Ай бұрын
Haha! Thanks for watching Richard!
@Jack_all Ай бұрын
I've bought a lot or woodworking tools from temu lately and they have all showed up well packaged and within 10 days, and im in Utah. I don't really like buying chinese knockoffs, but there's no way i'm paying $150 for a woodpeckers compass i can get for $7... the chisel honing guide is my favorite Temu purchase of the year.. i love it.
@FlynndoggWoodwork Ай бұрын
I hear you Jack, There are definitely some things that are well worth taking a look at on temu. Haha! I'm glad you like the shirts, I'm having fun making them. You can see all of my inappropriate shirts: www.flynndoggwoodwork.com/shop THanks so much for watching, really appreciate it!
@MemelordSupreme Ай бұрын
That juice groove jig is tempting.. rockler jue came out with one but it's like 80 bucks! 😲
@FlynndoggWoodwork Ай бұрын
I know, i saw that. I think I paid 50+ bucks for this one, so I might have spent the extra 30 to get it from rocker! Thanks for watching MemelordSupreme!
@patrickflynn-fk8mu Ай бұрын
Now that sounds like fun! Pizza, grandkids and wrestlemania! That is about as good as it gets!
@FlynndoggWoodwork Ай бұрын
whoops!
@raywilliams9461 Ай бұрын
Seems like accurate evaluations
@FlynndoggWoodwork Ай бұрын
Thanks so much Ray! I appreciate it and thanks for watching!
@afpitbull60 Ай бұрын
Well done! I've purchased several low-end tools from Temu. No issues so far. Don't think I would ever purchase a high-end tool from them.
@FlynndoggWoodwork Ай бұрын
Thanks so much for sharing afpitbull60. I think that is the way to go. You can't go wrong with some of the low end stuff. THanks for sharing and watching!
@afpitbull60 Ай бұрын
@@FlynndoggWoodwork I always find your videos both entertaining and informative.
@patrickflynn-fk8mu Ай бұрын
I appreciate that!
@FlynndoggWoodwork Ай бұрын
@@afpitbull60 Thank you so much, I appreciate that. I know my humor isn't for everyone, but I'm having fun with it.
@afpitbull60 Ай бұрын
@@FlynndoggWoodwork For me, it's all about having fun. Otherwise, what's the point of doing it, right?
@robertlevine2152 Ай бұрын
Flynndogg, Good information as usual. When you use the dial indicator on the blade as in your video, I'm not sure what you are checking. Assuming the arbor nut is tight unless the blade is bent you should not find any difference. The dial indicator is used to check whether the blade is parallel to the track. This is done by marking a spot on the blade as far from the arbor as practicable. You should mark where the dial indicator is making contact to the blade with a Sharpie. Rotate the blade 180° and move the dial indicator to the spot that was marked. The difference will be an indicator of whether or not the blade is parallel. You can buy a calibration disk. This keeps your fingers safe from the teeth of the saw. The calibration disk, with some adhesive and sandpaper can turn your tablesaw into a disk sander. Bob
@FlynndoggWoodwork Ай бұрын
Thank you so much for sharing this Bob - Great information really appreciate it!
@mtnjak Ай бұрын
Good video. I like knowing ahead of time if some of these budget items from China are any good. I wanted to let you know that I took the plunge recently and order a few items from Banggood. Of course, I want to support American companies whenever I can but the alternative to what I purchase is not actually from an American company and is twice as much for what I paid for its Asian equivalent. I'm referring to the Chinese equivalent of the Jessum table saw stock guide. I just started using the Hongdui guide yesterday. I have never used the Jessum brand but I will say that the Hongdui doesn't appear to be a knock off. It actually looks pretty identical to the Jessum guide. So much so that, and I could be wrong but, I suspect they are made from the same tooling. The guide works very well with no issues and it's half the price of the Canadian counterpart. I also picked up a 39" inch T square. It also appears to be very accurate and a good buy. With free shipping and taking a little less than 2 weeks to arrive at my door I can't complain! I thought I'd mention it. I wasn't sure if you've done any videos from Banggood or not. Thanks for the video!
@FlynndoggWoodwork Ай бұрын
Thank so much for sharing this mtnjak! I've heard some other viewers talk about hongdui as well. Sounds like they are putting out some decent products. You may have just gave me a future video idea! :). Thank you so much for sharing and watching!
@mtnjak Ай бұрын
@@FlynndoggWoodwork You bet!
@dang6832 Ай бұрын
Do the Temu “Micro Jig” clamps also fit into the T groove to hold like the jig clamps?
@FlynndoggWoodwork Ай бұрын
Yes, they should fit regular t slots. That is one thing I intend on doing with them for sure. Thanks for watching Dang!
@dang6832 Ай бұрын
@@FlynndoggWoodwork 👍🏼 thanks!
@liquidrockaquatics3900 Ай бұрын
@@FlynndoggWoodworkmore importantly, is the metal quality the same? A lot of the super cheap stuff is pot metal and not worth the time to unwrap; not always, but the super cheap metal stuff often has tin or something added to the alloy
@FlynndoggWoodwork Ай бұрын
@@liquidrockaquatics3900 This is an excellent point liquidrockaquatics. This is something I should probably comment on in the future. I feel like a lot of times when you get things from temu, the metal feels light. Even lighter than normal aluminum. Something to watch out for sure I think. Thanks for sharing and watching!
@hamilde Ай бұрын
Don't forget, you can use that dial indicator to measure how parallel you blade is to the miter slot. I check mine every year or so.
@FlynndoggWoodwork Ай бұрын
Excellent point! Thank you so much for sharing and watching hamilde! Really appreciate it!
@hamilde Ай бұрын
@@FlynndoggWoodwork I started watching you when you only had 1k or 2k subscribers I think. I enjoyed seeing a woodworker that was as organized as me😉. I'm glad your channel continues to grow.
@FlynndoggWoodwork Ай бұрын
@@hamilde Thanks so much! This youtube thing is making it more difficult than ever getting organized! :). Thanks for watching me over the last year or so. I can't believe I've had so much growth. Really am grateful!
@eddiyws Ай бұрын
I like your shirt 😅
@FlynndoggWoodwork Ай бұрын
Haha! It's one of my favorites as well! :). Thanks so much for watching eddiyws!
@jeffautry8892 Ай бұрын
My question has zero to do with this video, I was wondering what and where did you find the insulation for you roll up door and does it allow the door to operate when installed ? Thanks
@FlynndoggWoodwork Ай бұрын
Great question Jeff, it actually comes with insulation already attached to the door. If you google insulated roll up garage doors you should find plenty of options. Mine was made here by a local company here in Indiana. Hope this helps, and thanks for watching!
@CorbyQ Ай бұрын
Love me some Burt
@FlynndoggWoodwork Ай бұрын
My alter ego! :). THanks as always for watching CorbyQ! Hope you have a great weekend!
@CorbyQ Ай бұрын
@@FlynndoggWoodwork i appreciate that. Just watching Wrestlemania with the grandkids and ordering some pizza. Hope everyone in the Flynndogg woodworking family has a great weekend as well. Even Burt. Lolol. Such a great character.
@gruss5157 Ай бұрын
The problem that I had with the Juice groove maker is that the screwhead did not fit my allen wrench and they would not replace it😢
@FlynndoggWoodwork Ай бұрын
That sucks! I think we are on the same page with temu. I'm sticking with amazon!
@robertberger8642 Ай бұрын
Good info, but… that type of mallet would normally be used for chiseling/carving, yes? If so, wouldn’t a harder striking surface be better than a softer one?
@FlynndoggWoodwork Ай бұрын
Yep, someone else mentioned that as well. But I was hopping for a rubber one. That is part of the problem with this website, the descriptions are poor, and the pictures are misleading sometimes. But you are 100% right, this is definitely a mallet for chisels. Thanks for sharing and watching Robert!
@patcross5799 Ай бұрын
I decided quite a while ago that TEMU may deliver, but the risk just isn't worth the occasional success. Still thanks for the fun Saturday Lunch video, enjoy your weekend!
@FlynndoggWoodwork Ай бұрын
I'm 100% with you. If I didn't have this channel I probably wouldn't be ordering from them at all. This channel gives me an excuse to check them out for everyone, and I'm not convinced! Thanks as always for watching Pat!
@FrugalShave Ай бұрын
What risk? If anything if not up to snuff they refund you instantly.
@radiko76 Ай бұрын
You can return stuff to Temu, quite often they just give you money back ( in credit) and you don’t have to send the item back ;)
@FlynndoggWoodwork Ай бұрын
Thanks for sharing and watching radiko!
@NathanTalbertWoodworking Ай бұрын
Every once in a while i'll try downloading temu to see whats up. Every time I end up just deleting the app because of how pushy it is to pick your stuff and check out immediately.
@FlynndoggWoodwork Ай бұрын
Yep, I 100% agree. Their website and app are like a carnival. Too much going on, too many deals, etc. I'm sticking with Amazon! :)
@NathanTalbertWoodworking Ай бұрын
@@FlynndoggWoodwork agreed. besides amazon has us spoiled with fast shipping. I live in the middle of nowhere so I still only get 2 day shipping and the very rare next day shipping. my buddy lives in the cities and gets same day shipping on a lot of orders.
@FlynndoggWoodwork Ай бұрын
@@NathanTalbertWoodworking I'm lucky enough to get same day sometimes, but usually next day. Most of the time plenty quick for me! :)
@Damon_Barber Ай бұрын
Thanks for reminding everyone why to steer clear of TEMU for any measuring devices. They just stick thin rulers in a bag to ship over the biggest ocean on the planet. It looks like either they are TRYING to improve shipping since a couple of items were in boxes, OR… and this is more likely… they got a deal on “scratch and dent” products.
@FlynndoggWoodwork Ай бұрын
I 100% agree with you! I really don't like going to their website either, I feel like I'm going to a carnival website. It seems so confusing when I get on there. I'm happy with amazon, and that is where I will do most of my online purchasing! Thanks as always for watching Damon!
@10_rds_Fire_For_Effect Ай бұрын
@Flynndogg Woodwork I've only received a couple of orders from Temu. No packaging damaged at all. But what I have noticed is that stuff I've seen is counterfeit. I recently bought from TEMU an "Original' German made Hurricane lantern from an apparently well known German maker. The packaging says "MODEL IN GERMANY". The attached tag, which is a copy of the genuine makers tag says "MODEL IN GERMANY". The lanterns glass lens says "MODEL IN W.GERMANY". It has "W.GERMANY" embossed on the metal body. But underneath the base of the lamp it has the embossed words "MADE IN CHINA". But I have run the lantern for several hours and it seems to work fine… for now. It seems to be well made. I guess time will tell. So until it stops working, I will give it a "Chinese Clap" for functionality, and a "Chinese Crap" for dishonesty. It is clearly a dishonest counterfeit of the genuine German product. But it was dirt cheap. A very nicely made and fitting cap I bought from Temu has NO manufacturers label inside. That is dodgy.
@FlynndoggWoodwork Ай бұрын
Totally agree. That has been exactly my experience as well. I actually did a video on many of the issues you spoke of last summer. Temu also avoids paying import or duty taxes by making sure orders are less than $800 apparently.
@KangasAri Ай бұрын
I've ordered from Temu several times and I've yet to receive a package that's as battered as you and other Americans seem to get. Not to mention anything being banged up enough for them to be damaged right from the start. I'd probably look at your local couriers / USPS / whatever delivers the last leg for those responsible for the damages. Otherwise I do agree with what I see often: A lot of the gear is often really tiny, some are really poor quality while others may surprise you, but most often you're just surprised for once you actually received something useful.
@FlynndoggWoodwork Ай бұрын
Someone else mentioned that when I did a video on this last time. I don't think it is my local courier but maybe customs. Many times you can tell that the packages have been taped over where there is damage. Thanks so much for watching KangasAri!
@Kreacher1974 Ай бұрын
Ive ordered quite a few tools from Temu and have no conplaints yet.
@FlynndoggWoodwork Ай бұрын
Oh good! I'm glad to hear that. Sounds like you've had some great luck! Thanks for watching Kreacher!
@thebrabman 14 күн бұрын
14:29 there is 6 predetermined angles. 22.5° 30° 45° 60° 67.5° and 90°
@FlynndoggWoodwork 8 күн бұрын
Great catch! Didn't think of 90! Thanks for watching TheBrabman!
@CorbyQ Ай бұрын
Pretty sure those holes in the red thing is either indexing holes or for some kind of centering jig. Idk i dont speak chinese
@FlynndoggWoodwork Ай бұрын
Haha! Yeah, I agree with you. You would think they would include some pins with the tool. I think 1/2 the stuff sold on Temu is not fully thought out.
@marypowell2994 Ай бұрын
👍
@FlynndoggWoodwork Ай бұрын
Thanks for watching Mary!
@craigbrosinski1905 Ай бұрын
Sorry, not ordering any cheep Chinese tools but did pick up the T-shirt you had on in todays video.
@FlynndoggWoodwork Ай бұрын
I hear you! I'm sticking with amazon too. Thanks for watching and thanks for getting a t-shirt! really appreciate it Craig!
@ST-0311 Ай бұрын
@@FlynndoggWoodwork Meh. Most of the same tools are available on Amazon, but for 50-100% more. Multi Angle Square: Temu - $11.24 Amazon $21.58.
@FlynndoggWoodwork Ай бұрын
@@ST-0311 I agree, I'd rather pay the higher fee on amazon knowing that I'd get what I order and be able to easily return it.
@peterg0 Ай бұрын
@@FlynndoggWoodwork Actually many products from amazon also made in China 🤣😂🤣
@FlynndoggWoodwork Ай бұрын
@@peterg0 Yep, I agree, but amazon is american and is much easier to deal with in my opinion. Temu is a carnival! :)
@pinballrobbie Ай бұрын
The fence is not supposed to be square, there is supposed to be a tiny relief from the front of the saw blade to the back edge for clearance. The wood will still cut parallel to the fence.
@FlynndoggWoodwork Ай бұрын
That makes sense! Thanks for sharing! I guess that I don't need to make any adjustments assuming my variance was in the right direction. Thanks so much for sharing and watching pinballrobbie!
@pinballrobbie Ай бұрын
@@FlynndoggWoodwork The same applies to the Sliding table fence, I did not know this for many years until a trainer from SCM came to our workplace and showed us how to set up the table saw. This is why you can't use both fences together when cutting sheet material.
@FlynndoggWoodwork Ай бұрын
@@pinballrobbie Oh makes sense! Now you have me thinking about when you put the fence on the other side of the blade. I rarely put it over there, but probably something to think about! Thanks so much for sharing great insites.
@WyldfireKeeper 10 күн бұрын
The Amazon ship times for non-Prime members is about a week as it is. Hell, they can’t even keep their 2 day promise for most of my wife’s Prime orders. And Temu seems to only be getting faster with their deliveries. Most of my deliveries from them are at about a week and a half. You’ll wait longer for Temu, but if you do some research, you’ll have a good idea of what is junk and what isn’t. And if we’re being honest with ourselves, Amazon offers almost as much garbage for sale as Temu does. So you’ll save a bunch of money on the stuff that isn’t junk, not have to pay for a premium membership, aren’t being lied to about shipping times, and only have to wait a few more days than non-Prime shipping times. The only real downside to Temu is the return process is a pain.
@FlynndoggWoodwork 9 күн бұрын
Thanks for sharing and watching WyldfireKeeper!
@TrevorMatthews Ай бұрын
Honestly I think it’d be a better video without Bert but I still appreciate the reviews
@FlynndoggWoodwork Ай бұрын
Haha! You and me both! Thanks for watching and the feedback Trevor!
@mlrable Ай бұрын
I can't wait until my bright ass charges the wallet
@FlynndoggWoodwork Ай бұрын
Haha! Too bad it doesn't work like some of those motion winding watches you see. With all the twirking I do, I'd never have to charge it! :)
@bmacaulay18 Ай бұрын
Can't be surprised when the tool that shows up is smaller than expected. Using a child's hand in the photo shoot to make it look bigger is no different than using child labor in the factory to make it cost less.
@FlynndoggWoodwork Ай бұрын
Haha! That may be accurate! :). Thanks for watching bmacaulay!
@bastian1847 Ай бұрын
I'm not sure it's fair to say the quality of the ruler isn't great based on it bending.... it was sticking out the side of a package, unprotected, after all :) I do like that you can switch out a more stable ruler, though.
@FlynndoggWoodwork Ай бұрын
True, and point taken. Temu really has a packaging issue in my opion. Thanks for watching Bastian
@troycogan1030 8 күн бұрын
Hey Bryan, as far as quality if ANYTHING is damaged or broken fill the form out and within 12hrs normally have a refund. Please don’t do a review & bag a product without giving your viewers the correct information on returns & refunds doesn’t look good for your opinion. I’m NOT affiliated with Temu, but have purchased a number of tool products that I thought may have been a risk and have turned out being fine. Another good show.
@FlynndoggWoodwork 8 күн бұрын
Thank you for sharing your opinion and watching.
@CorbyQ Ай бұрын
Te-shit. Lolol good ole Burt
@FlynndoggWoodwork Ай бұрын
Haha! You got that right! :). And that is PG rated Burt! :)
@themeat5053 Ай бұрын
Dogg, man, sponsors now, what...? We got the Chinese clap, once. We knew you had a fat wallet after watching all the toys you've got. Paolini, Paolini, Paolini! Many push-ups...thanks. A lot tinier than you need to pound in those joints, eh? We think you should consider the carbide tips from My Wood Cutters, they seem to be well priced and ship quickly. Effing Burt.
@FlynndoggWoodwork Ай бұрын
I know Effing Burt.... Haha, I need to check out My Wood Cutters, hadn't heard of that website before. Sounds very interesting! Thanks as always for watching meat. Effing Burt will be making an appearnce next week too unfortunately. At least that is the plan. Had a burt run in me a couple of weeks ago. :(
@themeat5053 Ай бұрын
@@FlynndoggWoodwork Well, we suppose that Burt, in his own way, is trying to help.
@FlynndoggWoodwork Ай бұрын
@@themeat5053 :)
@FrugalShave Ай бұрын
You forgot to mention that Temu has free returns and will refund you for any and all duds you get, so you don't end up spending any extra. Also the mallet is designed for striking metal tools not wood. So if it was soft it would be a compete fail as it fell apart very quickly.
@FlynndoggWoodwork Ай бұрын
THanks so much for sharing FrugalSHave! And thanks for watching!
@quakergrits4610 Ай бұрын
The website literally says your information will be encrypted
@FlynndoggWoodwork Ай бұрын
Thanks for watching quakergrits!
@ronaldmoravec2692 Ай бұрын
Temu is a company from the large country in west Asia. Support them at our country risk.
@FlynndoggWoodwork Ай бұрын
Thanks for watching Ronald
@theomoons Ай бұрын
So, a temu review video, but hardly any functional links to the reviewed temu products, interesting.
@FlynndoggWoodwork Ай бұрын
Yep, that is because Temu does not allow you to create such links, the products are constantly changing and I couldn't even find many of the products that I even reviewed. This is another issue with the website.
@theomoons Ай бұрын
@@FlynndoggWoodwork what a Circus... Thanks for the reply.
@Pat64783 Ай бұрын
I've seen a lot of videos about temu and I'm just going to stay away from it and stick with Amazon as well.
@FlynndoggWoodwork Ай бұрын
Excellent decision Pat, I am 100% with you. Thanks so much for watching!
@paullalekna5478 Ай бұрын
Temu is exactly the same as Amazon, they are both aggregators, they don't sell any products of their own but Amazon looks better because it has been around longer and is more polished
@apenza4304 Ай бұрын
@@paullalekna5478 Except on Amazon you don’t have to worry about your credit card being charged fraudulently.
@roberttillotson4889 Ай бұрын
So, Ekxter gave me 3.5% not 35%. Hmmmmmm...
@FlynndoggWoodwork Ай бұрын
Hmmm, it should be 35% If you would like to send me an email to my email address I can follow up with them. My email is bflynnwoodwork@gmail.com
@michaelbradford4444 Ай бұрын
Burt needs to go!
@FlynndoggWoodwork Ай бұрын
Thanks for the feedback and thanks for watching
@jimgott119 Ай бұрын
I will never buy from TEMU. Ever.
@FlynndoggWoodwork Ай бұрын
I don't blame you. I'm done with them too!
@user-zl1pj5ii1f Ай бұрын
You’re missing out. They have ALOT of good stuff. As a matter of fact, most of your Amazon items COME from temu and resold or straight from alibaba where all suppliers get their stuff 😂
@samcolt1079 Ай бұрын
@@user-zl1pj5ii1f WRONG THE STUFF IS JUNK
@user-zl1pj5ii1f Ай бұрын
@@samcolt1079 no I’m right. It’s 100% facts. Your Amazon tools are junk as well 😂 keep crying
@VagabondTE Ай бұрын
This is just a personal opinion, but if you're battling with the company just to make sure you get what you payed for, then it's not high quality.
@FlynndoggWoodwork Ай бұрын
I would tend to agree with you Vagabond. Thanks for commenting and thanks for watching!
@ThePSMA Ай бұрын
No!
@FlynndoggWoodwork Ай бұрын
Thanks for watching thepsma!
@swarf52 Ай бұрын
If you want accuracy don’t buy Temu…..in general buy Temu buy crap
@FlynndoggWoodwork Ай бұрын
I would tend to agree with you on that. You really have to dig for decent items. Not something I typically like to do. Thanks for watchign swarf52
@albertabs 24 күн бұрын
Temu is for DIY , it’s cheap ,not for professionals ,
@FlynndoggWoodwork 24 күн бұрын
Haha! I'm not sure I would even give them that much credit. Some of the stuff is just flat out junk! :). Thanks so much for watching albertabs!
@CycoBillywoodworking Ай бұрын
you can the same stuff with wood made in squares and not support china
@FlynndoggWoodwork Ай бұрын
Yep, you could do that! Thanks for watching!
@liquidrockaquatics3900 Ай бұрын
It’s difficult to not indirectly buy from China anyway. Even products made in other countries are often made with parts sourced in China and other nations. It’s VERY rare to have a complex product made entirely from 100% domestically sourced, manufactured, and assembled in a single country except China.
@FlynndoggWoodwork Ай бұрын
@@liquidrockaquatics3900 yep, I would 100% agree with you!
@TheGc66 Ай бұрын
that alter ego bizness is hilarious!! its also indicative that you may need a friend.
@FlynndoggWoodwork Ай бұрын
Haha! I won't disagree with you on both points! Thanks so much for watching TheGc66! :)
@TheGc66 Ай бұрын
@@FlynndoggWoodwork digging that new shirt too, you need a "mass t-shirt deal" offering all of them at a discount, i can't decide,,, theyre all like the mantra's to my life.
@patrickflynn-fk8mu Ай бұрын
That’s a great idea, I’m actually contemplating building another one for my shop as I love it so much. So useful!