Mike, thank you for being so kind as to produce your videos in English. I find them informative and educational. And your production quality is top notch.

Good review I also bought a Shad seat for my NC750X it fitted perfect but like you the rear seat was a bit sticky so I changed the seats pop up springs to The Honda ones on the original springs, I think the Shad rear seat springs a a bit weak. Since using the honda seat springs the rear seat pops up perfectly I hope this will help you.

Good Job, thanks from Catalunya

Thank you 🙏 your video is helpfully

Very usefull video, thanks for sharing with us! To be honest in my case the Sw-Motech traveller seat pad cushion fixed the confort issue with less money. Also for me and for my pillion. I come back after long term use with full opinions. Greetings!

Excellent video!!

Tkx for sharing this tuto

Reviewing again as I am just about to install mine!

Awesome video mate! Thanks!!! I`m getting mine next week :)

Good work!

Nice, clear and well-spoken videos. Good job. Regarding the seat comfort, height and slope, Shad does not solve all problems. Height will remain the same as well as slope. Comfort will improve. Solution? Perhaps tailor-made set? I am thinking of taking my original seat to polster guy, who removes the original surface material and changes the slope a little. Also 3-5cm raise is on the wish list. My guestion before doing this: I am 186cm and if I assemnle 2,5-3,5cm bar raisers and SW Motech adjustable footpegs along with aimed 3-5cm raised seat, is there something I should take into consideration before all this? I am planning this to ease the pressure in my lower back. Last summer was a bit painful :))

Excellent tips - kitoos

Thanks for this helpful video, can I ask if the Shad seat makes any difference to the seat height, higher or lower than standard?

Thank you. I am considering this bike, but I have heard that the seat is one of its few weak points. I need a seat that is at least as comfortable as the 2013 Suzuki V-Strom's OEM seat. I had that V-Strom, but like a fool I swapped it for a new Yamaha Tmax in late 2018 (to go clutchless due to hand pain), but I don't ride it as it's a disappointing bike. If only I had just gone from the V-Strom to the 2018 NC750X DCT, I would have saved myself a considerable loss of money.

Gracias por tu video

Hello! I've just installed the seat. Is far more comfortable than the original one. I noticed that the stitching of the back seat on the left side doesn't align with the one in the front. That quit annoys me... and i have exactly the same problem when opening the gas tank...

Based on your helpful video I too purchased a SHAD comfort seat. The fit & finish is flawless, which pleases me no end, as I have seen others suggest theirs showed an unacceptable gap where the seat meets the frunk. The fitting instructions state that the springs and washers from the original seat should be utilised on the SHAD and, so far, it is opening and closing perfectly. Even the stitching matches perfectly where front and rear seats overlap. The real test will be how comfortable it is. Fingers crossed it’ll be a big improvement. 🤞

Thank you,

How much is the diff between the original’s compared to Shad’s?

nice content

For the rubbers, use a little soft soap

Can you send a link for shad seat model year 2021 Honda nc750x ?

It seems this seat is no longer available for the NC 750 I have looked everywhere including searching the part number and still can't get one, anyone help?

Does it fix the seat slope on nc750x?

Nice!

Can anyone please send me a link of where to buy it from? Thank you

hi i love the look of the nc i think its the best value bike honda make at present. that seat looks great.i am considering a change to one but am concerned about its modest power output. i ride a honda firestorm at present and have done for more than 20 years. while the storm isnt the worlds most powerful bike it does have a good amount of torque. i suppose really a test ride would alleviate concerns but would appreciate the feedback of an actual owner especially anyone who has moved from more powerful bikes to the nc750.

I have the same problem with the seat, only to close the seat I have to pull it hard to the right and to open it, I have to press as you do to release it.

Hi FinnMike, does the shad seat stop you from sliding on the tank (fake tank that is)? A known problem with the factory seat. Thx for your help! JP

If you are 5 foot 10 inches (178 cm), are your feet flat on the ground with the NC750X (2014), which has a seat height of 32.7 inches (830 mm)? My inseam is 29.5 inches (75 cm).

How many more in/cm of padding

I owned an early model of the NC700 and sold it due to the fact that I am a very long distance rider and my butt would get sore after about 4 hours in the seat. I really miss the bike because it handled well and saved me a lot in fuel. Now, I am thinking of getting another as a second bike (I currently ride a Vstrom DL1000). I like the Shad and looking forward to your review of long rides using it. I am interested in an all day ride on the Shad if you can do it. Thanks for the videos and look forward to your review.

cant find this seat anywhere!!

Ordered mine for £213.84 from Fast Bike Bits. Not so fast though 1-3 week wait for the seat to arrive with them. 2 weeks in. Looking forward to it though.

Hi enjoyed your video ive got a 2019 nc750x and the original seat is a plank , have looked on shad website and states seat is part numbe SHH0N720CN but your video shows part number as SHH0N720TN , just wondered if you could confirm please , also looks like the shad seat has same slope as the original , does the shade seat because its less hard tend not to slip rider forward as much ? many thanks Steve

OK, but ... does the SHAD seat fix the sliding forward issue of the original seat that everyone and their mother are complaning about?

Hi, what’s part number of the bigger seat?

sind alle sitze der rc90 bj. 2016 bis 2020 gleich? oder gibt es da unterschiedliche bohrungen oder halterungen. kann mir das jemand beantworten? danke are all seats of the rc90 bj. 2016 to 2020 the same? or are there different holes or brackets. can someone give me an answer? thank you

Where to buy as I’m thinking of getting this bike as soon as I pass my test. 😊

where did you buy? give a link.

How much does the SHAD seat go for.?

is the SHAD seat lower than the old one?

Hy friend! Vero nice video, but I’m lost the cost, please how much $? t. y. Gian from Rome

Где покупали?

In which store did you buy this seat?

is seat comfortable more then original??