Tyler: I'm going to stay away from this label, and go lower. Tyler: Proceeds to slash through label

Tyler learning about the acid in tomatoes is everything

Love my worksharp, you should try the Ken onion model. Multiple grit belts and you can set the speed and angle of the grind.

Leave ridge wallets in different liquids

The whole point of the tomato test is that you’re not supposed to saw through the tomato, if the knife is sharp you should be able to make a thin slice in one swoop

If you have a sharp knife alot of the time you can cut through a tomato with only the weight from your knife

Tyler, my guy, Tomatoes are acidic as hell. Of course it's gonna sting a cut.

"I thought tomatoes were good for you...why are they trying to hurt me?" - TylerTube 11/4/2020

Back in the late 90's, my great grandfather built a homemade knife sharpener that he was extremely proud of. He would sharpen my whole family's kitchen knives and what not, and they were always really impressed, so I tried, and tried to get him to sharpen my pocket knife with it, and he never would because he was afraid I would cut my finger off or something (you know how grandpas are). When I got a little bit older, and more responsible (about 12 years old), I finally talked him into sharpening my same old pocket knife. It was incredibly sharp. I went around the trailer park, and literally cut every single trailer house in half with it. They ended up kicking my grandpa out over it.

I'm really pleased with this! It works like a charm kzfaq.infoUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ Takes less time than my old electric sharpener because it can take more off the knife faster, and then it smooths out nicely with the finer grit polisher. I don't know how long it will last before the grit wears away, but I wouldn't mind having to replace it every once in a while.

Should’ve put the knives in the rock tumbler to make them dull lol

"Why over-engineer something that is already simple?" - Tyler, 2020

If I remember correctly you said your a diesel mechanic. I'm kinda interested to see some of the stuff you work on

Mora knives come with a scandi grind, you’re supposed to sharpen them at like 45 degrees on each side, you just completely reprofiled that knife to about 40 degrees total.

As a knife guy this video hurt my brain, as just a regular person... I enjoyed it. You should get into knives Tyler, its a great hobby and has an amazing community.

@TylerTube, I WAS having a not so happy day. Thanks for adding some light into it. I’ve been a member of your channel for a very very long time, and I don’t think I have ever messaged saying thanks for doing these happy, uplifting videos!! Merry Christmas brother!

Tomato’s have citric acid just like oranges and lemons.

"Although I don't understand why tomatoes are trying to kill me"

Can you explain how to "Cut Hot Butter"? Haha, had me crying.

Can't believe you took about 3 seconds to spell the Mora! Its a very well-known Swedish company and thier knives are absolutely reliable and insanely affordable.. Keep it up tho i enjoyed your vedio 👍🏼❤️

I like more when you really get the first impressions about stuff on camera rather than demonstrating something that you already manipulated before. Despite that, awesome video anyways, as always!

9:13 When your friend is new to Minecraft and is trying to mine with a sword

Test truck gadgets! Like so he can see this.

"Mora knives" is a Swedish brand, Mora is a city in Sweden. That knife is a "work knife" used by carpenters, electricians and so on...

Tyler needs to see how long it takes to cut through a cinder block with different knives.

Love how excited he gets when cutting the tomato, when he gets a thin slice 😂

If you have that pull down issue, maybe use the one side for both sides of the knife, just flip the knife and drag it the other way... Just something i thought of Tyler

I love ur videos man I been a subscriber for a long time bro Great to see you u growing dude

Those mora knives are present in tool box of every Swede. Cost around 2-3 dollars each. The better mora knives are carbon knives but there is the cheaper stainless steel ones too. Mora is a town in Sweden known for steel and tools making industry.

Good job buddy, keep them video's coming 👏👏👏

Watched this channel for the first time today. I've been enjoying it. As a matter of fact, I've been watching this content all day(about 8 hours). You've earned my subscription. Thanks for the content

Put a butter knife through the sharpener, and see how long it takes to make it sharp.

If you were to strop the knives after the sharpening you would notice a huge difference:) that belt is really coarse and leaves a huge burr, a strop would seriously improve the edge quality :)

Omg thank you for getting the butter knife

I don't know if anyone has explained it yet or not but the Mora knife has a specific grind on it called a Scandi-grind where it's geared more towards outdoor use and wood working. It is harder to slice the tomato because the edge is decently thick.

Love the vids keep it up!

Great video, I use a Wicked Edge sharpening system mostly but I Love my Ken Onion Worksharp. This was an awesome ad for Morakniv!

I have the Ken Onion edition and can assure you it works like a charm.

I love watching your videos thank you and please keep up the good work

Ive been watching tyler for almost over a year, those water bottle chops were bybfar the best content yet.

If you sharpen knives alot and you aren't interested in a Wicked Edge or a KME, grab the Ken Onion Worksharp. Also use the side that pulls the knife down first, then the side that pulls the knife up second. That will build a burr. Then use the ceramic honing rod to remove the burr. Thats how you get a sharp knife. Also bonus note: my uncle was DEATHLY AFRAID of pickles. Legitimately 😂😂. Love the channel brother, keep it up!!

It's as if ProjectFarm is the parent of Tyler Tube🤣 he is serious with small jokes, but Tyler is the younger one who wants to assassinate mannequins while he reviews a product. I love both channels.

I've had one for years. But it's different than the one you are testing. I love it. On Amazon there are packs of cheap belts in many grits available. I use it frequently

Love the vids brother!🤙 killer content! 🇨🇦

The title made my head hurt.. i need more coffee.

Jesus ...send this man a slo-mo camera, FAST!

I've had mine for several years now. Using the leather honing belt I can get incredible edges on all sorts of blades. I've gone through several belts, and it really is an amazing blade sharpener!!

I feel like I have a really great idea of Tyler's favorite shirts after watching for a while

10:55 is this a kitchen knife or a concrete knife 😂

“You can see the blade through it and everything” -Tyler, like 47 times

Watching Tyler play with knives is just the break I needed from the crazy election coverage :)

I use the Ken Onion model and its sweet. It has different belts and angle adjustments. I can sharpen every knife I use in the kitchen and most that I use in the field. Great video, Thank you

Honing a blade doesn't sharpen it really, it actually straightens the edge so it cuts better, and it makes sharpening the blade more effective.

This is a great, fun video - everything Tyler says is valid. and honest. BUT - you have to understand that a Worksharp machine - I absolutely love mine - is just a specialized a belt sander. There's nothing at all wrong with that as most of our favorite knives are created in a grinding or stock removal process. You can make a dull knife razor sharp quite quickly, but you do that by grinding away some of the metal. How long it stays sharp is dependent on the quality of the metal. You can take a flat slug of metal that has squared off edges from squared off to razor sharp in a few minutes, but you might create some scratches on the unsharpened surfaces, and you will almost certainly change the shape of the blade if only subtlely. I love my Worksharp machine. I can make any piece of any kind of metal sharp almost instantly, but I cannot make crap metal steel into high quality metal. You can make high quality metal extremely sharp, but you can't make it look like it is factory sharp, never sharpened by the consumer. Worksharp is FABULOUS for working metal, but it will instantly destroy any collectible value of an unsharpened knife. It's an incredibly good sharpening system for an expendable work blade that you need to make sharp. It will mess up a blade you want to keep in mint condition. You're likely to ruin the tip of a pointy knife, and you're likely to alter the shape, even if very slightly, of a collectible knife that you mean to sell for a profit at some later date, if you happen to be one of those who buy a knife new and sell it when it becomes classic. Do not use a Worksharp device on a knife you expect to sell someday - but you can be absolutely comfortable using it on a knife you need sharp as possible for some type of work as long as you have no concerns about the future value of the knife. Worksharp is not for a collector, it is for a USER of knives and other sharp edged tools - and it is very, very good at making any piece of metal sharp.

I know they are probably over expensive but project farm has a machine that test you are sharp a blade is. Love your content Tyler gaming and all. You are very down to earth and dont hold punches always a pleasure to see your notification pop up.

My god that noise when you drag the blade on concrete. I almost swallowed my tongue

I love how you progressively get better at slicing tomatoes 😂😂😂

A review of a product I've been considering buying for a while now. Awesome. Maybe this video will purswade me to get it

Love your videos bro, and really enjoy your streams of The Forest on the gaming channel

Well I was looking for a knife sharpener. So thank you for this 👌🏻

Who's gonna tell Tyler that he showed his credit card while showing the ridge wallet

Amazing youtuber!!....not so amazing chef 👨‍🍳 😆 love the videos💯

Since the first battlbox video, I've been asking you to test extremefix. I commented on EVERY video(almost), and i got no answer. I give up! Merry christmas btw

Super dope! Much thanks. I might try this on my kitchen knife. It’s blade is missing it’s edge quite a bit.

I love the dulling for whatever reason lol. Awesome man keep em coming!!! 🇺🇸🇺🇸🇺🇸

Coolest water bottle slicing I ever seen

Ohhh a morakniv, sweden represent!

The Worksharp Ken Onion with the blade grinding attachment is the most versatile of the bunch as far as the powered work sharp models go. I love my Moras, old Cold Steels, ESEEs Swiss Army knives, Bucks...I pretty much love em all. I've been a knife collector since age 10 when my grandfather taught me to sharpen and hone by hand. Now...my teeth hurt😂 thanks Tyler😂

At this point the content is so good I like before watching

Good video. One suggestion: get deeper into knives. You wont be disappointed. The engineering that goes into even cheap blades is incredible. Amd the steels available today are even more so.

Dude how have you not hit 1mil yet omg

Tyler should try the Precision Adjust Elite.

dulling that mora made my whole body shiver and made my neckbeard stand right up

*serrated knife started cutting the cinder block* Someone: "omg no one tell the warden"

You should have your own tv show your the best

I love their guided field sharpener it’s a 3 step sharpening system that fits in your pocket he has a coarse and fine diamond plate and coarse/fine ceramic honing rod and a leather strop you make the dullest knife ever razor sharp

Tyler walks on frame the same way since 2018 when he changed from popping out of no where lol 😂

My dad: sharpens pocket knife Me: SHARPER Him: it literally cuts your hair off like butter Me: SHARPER Anyone else like this?

I own that, that is a great sharpener I use mine all the time you can get a mirror edge. You got the cheapest one get the Ken onion one you’ll be blown away.

who else wishes he sharpened the butter knife for the hell of it? edit: ayyy he did it at the end

the MORAKNIV is amazing!! get the black one with grey inside colour

I wanna see you try the Ronco Knife set

Has anyone contacted the media? I can see it now in headlines 👐 "Knife sharpener sharpens knife". Amazing stuff Tyler!

The master of not reading instructions!

tomatoes are acidic Tyler 😂😂😂

Lol watching your video and the run a add for a knife sharpener but not the one you are using in the video lol now that’s funny.

I would say it is worth it especially if you got a little bit of experience with it you could probably be very efficient and good with it

ok, this is the second time ive watched a video of yours that you tried slicing tomatoes... and i have to say something... slice the tomato in half like you did on the first cut then lay the tomatoes on it now flat side. put the point of the knife on the cutting board with the tomatoes behind the knife, then pull the knife back towards you, towards the tomato, keeping the point of the knife on the cutting board at all times.

It hurts to watch that contraption wreck the Scandi grind on that Mora.

in finland you can get moras starting from 1-4 bucks! i love it!

Can you test the stone wave because apparently it has a unique steam release chimney and domed lid design

1. Of course work sharp will sharpen. 2. You should always hone the edge after... honing is not "if you feel like it" like Tyler mentioned. 3. Tomatoes are used because of the hard exterior/soft interior. Dull knives will spilt their way through. Sharp will slice.

Tyler if you can read this when you were using the knife in the water bottle and said it wasn’t sharp enough to go through watch the replay in your hand was going up that’s why didn’t cut all the way through the knife blade was not straight

Hahaha when the tomato attacked him and he freaked out, now we know he doesn’t eat tomatoes either hahah so funny man love this

i loveee when u post man. Love from Serbia💖💖

Someone probably already said, but after you sharpen, do use the ceramic rod to hone the knives. It will knock the burrs off the blade (a product of sharpening) and it will slice much better.

I don't even need to watch the video, just popped by to comment on the fact that this thing is the BEST sharpener I ever owned. It sharpens ALL my knifes, tools, bits and haven't seen. Even the high strength CRKT knifes and makes them sharp in no time flat. I never use the guide and learned to just free hand it and it makes a HUGE difference with the beveled edge. LOVE IT! Edit: I use the Ken Onion edition

I'd be curious to see what numbers you get on a Edge-On-Up Professional Edge Tester before testing, after dulling, and after sharpening...

I'd really like you to do a test on the larger version of that brand. They have 1 model that will do any size blade & has a 3 stage belt setup that uses a honing type white belt. They run about $80.

Tyler: cuts bottle of water for his own amusement Kids in africa: “😐”