The manufacturer should be ashamed of this engineering.

I’m sitting here, laughing at myself in frustrated camaraderie as I struggle with my own dolly. With your help and good humour, I managed to remove both of those axle nuts and am replacing the second tire now. I laughed out loud at “What in the haberdashery is going on here?” and while I have no idea what skippitypaps are, I now want some🤣.

I appreciate your effort cause I went through a banging on the wheel nut with a pry bar and a hammer like it was a war world bomber and nothing so I decided to have expertise on the problem now I'm going to apply the technic thank you

I appreciate this video. The problem we are having is very simple: the axle is moving as well as he turns the channel lock. He needs to use another channel lock on the other side of the wheel to make sure the axke does not turn. Thank you very much for the effort.

Thank you. 30-year old tubeless dolly wheels replaced with minimal effort. I only had a vice grip to pinch hold and turn the push nut. Your experience prompted me to give it a little extra persuasion with gentle use of a small wonder bar, to pry push nut while turning. It took about three minutes without WD40 (no mess). And like your result, no need to buy new push nuts. Again, thank you for the insight.

Thank you very much because you gave me enough details to get this infernal push nut off my pressure washer. Who ever invented this is truly sadistic.

THANK YOU. Thank you for showing the real deal. I was feeling discouraged but your video gave me the push to get back out and try again. And this time it worked.

I appreciate your efforts. It certainly informed me of what I’m in for.

Thanks to you I didn't have to buy new push nuts!! However, I used a pair of vice grips and pulled it right off! Thanks for saving me from drilling out the tabs.

This was hella helpful bro thank you

EXCELLENT VIDEO,,,, I love the reality of it.,..now I know what I'm up for.

Thank you I was successful in removing a push nut because I watched your video 😊

This helped so much thx

Thanks I'll tackle this on a cool day.

Thanks man. I need to change wheels on my dolly too. Wasn't sure how to get that push nut off.

Shoot, I appreciate the genuine video here. I really do.

I admire your patience. ha

This commentary is hilarious!

Absolutely 💯 % you will able to be the president United States with this kind of patience.

Omg I'm going through the same thing right now. I'm about to give up but you have me still trying

Attempted same operation myself yesterday, turning and turning and turning. Thing never budged. Realized later I was going about this entirely wrong, this morning I pulled out my Dremel and a cutter blade, and knocked out those tabs holding the nut on to the axle. Whole operation... including getting out the tools, safety glasses, and a pair of gloves (because those sparks will circle right around to your hand)... took about 5-10 minutes. Just be careful to which way the sparks fly, make sure your safety glasses are tight, use the gloves, and be careful how deep you go to not notch out the axle.

these things are ruthless

Holy moly

And if it's a.nice dolly you put a washer on and mark that spot and drill it so you can do a washer and cotter pin and NEVER have to deal with that again. If you have a slide hammer that works the best.

14.42 Minutes to remove. I had a similar struggle. I tried like 5 different pliers, the one that helped to remove was the Oil Change vice grip, it has round jaws, the tips went underneath and I clamped and I tried one side first and then the other and it popped out, from the time I clamped it took 1m 67 s.

Use vicegrips instead of those dumb channel lock pliers. It'll be off in less than 30 seconds!

I think they have a special tool for them also. To use that jimmy bar/crowbar/ flat nail puller tool would be good to use the L shaped end verses the straight end. Thanks for the big effort, pain in the @$$ to get off not lone to Fidel filming it also. Pull up as you turn also keep the axel from spinning also. Thanks again for your will to try & help others.

there is actually a tool to remove this. I have seen it. I just do not know what is called and where to buy it. It kinda looks like the tool to remove cork from a wine bottle, it has two flat little arms that goes under the cap.

what was the size of that cap nut? thanks....

Is there a trick to save the nut as well?

I have just removed the serrated washer. However, one edge bent.Sooo, if I can’t get another washer, I will definitely drill a hole in the axle, and use a cotter pin. It was a bitch to remove the washer.

This poor guy don’t have a clue on what the hell he’s doing

Aren’t you just spinning the axle?

OMG. Takes all day to get that off that ain't right

I like how you pretended to take it off after 15 mins of wasting our time...

Definitely not German... not Chinese either.

Friggin thing is child proof, never give up

This is very bad design hand truck! You will break it before it fix. It looks way harder than replace a car tire.

Not worth my time and effort, just purchase a new Dolly. That rusty old thing will probably break in half the first time he uses it.

This is possibly the worst video I have ever set through.