Don’t Break It! Engine Break-in Tips for Initial Startup
Рет қаралды 19,976
Күн бұрынGot freshly-built engine or a brand-new crate motor sitting under your hood? You’ve got to resist the urge to hop in and crank it over right away. The first few minutes of an engine’s life are its most critical and things can go wrong in a hurry-which could possibly cost you an engine. To help your motor enjoy a long, fruitful career, we’ve made this list of procedures and tips to address before you turn the key for the very first time. Give it a watch, and then we’ve got plenty more engine break-in guides, tips, and how-tos at our blog, OnAllCylinders. Check out more resources in the links below.
Crate Engines at Summit Racing
www.summitracing.com/search/p...
Engine Break-In Guide: 10 Tips to Help Properly Break in Your Engine
www.onallcylinders.com/2014/1...
The First 15 Minutes Are Critical: 10 Tips to Follow Before Starting A Freshly-Built Engine
www.onallcylinders.com/2022/0...
24 Tips When Starting A Fresh Engine for the First Time
www.onallcylinders.com/2023/0...
@jonathanduke8295 9 күн бұрын
The man touched on every area.
@JohnMiller-ee9pn 7 ай бұрын
I pull a plug or temp sensor out of the top of the manifold when filling so I know engine is full.
@GAMINGOBRIEN69 7 ай бұрын
Sick intro
@67cudaksa34 7 ай бұрын
make sure the timing is spot on.
@maddpeanut6313 7 ай бұрын
The myth of synthetic oil not allowing rings to seat has been debunked for decades. Brand new engines use synthetic oil directly from the manufacturer.
@Jonhobbs64 6 ай бұрын
Not true! Cast iron rings with a rough hone that older engines used to use might not ever seat. New cars have been using low tension , stainless steel rings with a very fine hone. Do reasherch before you cause someone to ruin there engine. You're welcome.
@davidcrandon2329 5 ай бұрын
You should make a bigger deal about using an actual break-in oil. You did say it about 3/4 of the way through the video, but in the beginning, all you said was oil with high zinc; you didn't say break-in. You really should put a text over the video, in the beginning, to say to use a "break-in" oil. It should be an oil with high zinc (ZDDP), low Molybdium, high detergent (to trap all the metal particles), and low anti-wear additives. And perhaps mention it may not be easy to find at a local auto parts store since these aren't API certified
@chargerman426 7 ай бұрын
AMSOIL has synthetic break-in oil so no more dyno oil in an engine that you dont want dyno at any point.
@GAMINGOBRIEN69 7 ай бұрын
You dident actually start it
JustMoparJoe
Рет қаралды 53 М.
Uncle Tony's Garage
Рет қаралды 117 М.
POWERNATION
Рет қаралды 991 М.
Garage 54
Рет қаралды 3,1 МЛН
Budget Build Garage
Рет қаралды 83 М.
Driven Racing Oil
Рет қаралды 14 М.
Tokparty
Рет қаралды 1,3 МЛН
PRIME IMPORT
Рет қаралды 4 МЛН
Xe Tải Miền Nam
Рет қаралды 67 МЛН