Don't EVER Use The CTEK Charger On Your Car For Programming !!

Рет қаралды 154,460

4 жыл бұрын

Don't EVER Use The CTEK Charger On Your Car For Programming !!
Click here to buy the Oil system Protector
amzn.to/2rNmXyz
Click here to buy the forte advanced engine motor flush treatment
amzn.to/35mxfnJ
Click here to buy the camera used for my videos
amzn.to/2PJpe5H
Click here to buy the camera holder used to film
amzn.to/2YO1elR
Click here to buy my second camera used for filming
amzn.to/2RRJyV3
Click here to buy my third camera used for my videos
amzn.to/34j1Cu0
Click here to buy the tripod used for my filming
amzn.to/38EE6eb
Click here to buy the ICOM used in all my diagnostic videos
amzn.to/2YMjBrD
Click here to buy the K DCAN Cable used in my videos
amzn.to/38CnPXb
Click here to buy the cable needed for F & G series cars
amzn.to/2sqp2Ao
Click here to buy the Forte Petrol Saver
amzn.to/2P33bYu
Click here to Buy Forte Oil Fortifier
amzn.to/2s6f3Qh
click here to buy the forte seal conditioner for valve stem seals without removing head and rear main seal
amzn.to/33Y7ubY
click here to buy the forte top end treatment for diesel and petrol cars
amzn.to/2P2lcX2
click here to buy the forte injector cleaner for all PETROL cars
amzn.to/36e0Mjr\
Click here to buy the forte injector cleaner for all DIESEL cars
amzn.to/38h7hnp

Пікірлер: 289

@pfoglar 4 жыл бұрын

For general battery maintenance, Ctek is anything but rubbish! I have been using a Ctek MXS 7.0 for many years now via the proper jumper points and this has saved my butt many times over with old dying batteries! On my E90 and another vehicle of mine, I have the Ctek CTX Battery Sense fitted which is super convenient and easy to keep track of battery state of charge remotely via my smartphone. I get that while my Ctek MXS 7.0 and other chargers in their range (and other brands) do have various modes and a "supply" mode, this will most definitely not be adequate to power the car's electronics in a stable manner for programming, no argument there, but to say that these charges are rubbish especially when used incorrectly isn't fair. The BMW charger (or tender) is a Ctek product, and just about every BMW dealership has tons of them plugged into their showroom cars. Maybe a good idea is to change your video title to specify "not to be used during programming"...

@tonymontana897 Жыл бұрын

I agree. I have been using C-Teks all over my garage. Everything here that has a battery has a C-Tek. The Battery in my E36 M3 lasted 12 years because of the humble C-Tek MKS5.0. I think ole mate here is rubbishing the C-Tek is because some are using them to keep the battery juiced while programming. I only use the C-Tek chargers for the purpose it was designed for. I have no interest in programming so that will never be an issue for me.

@shrekogre1010 3 жыл бұрын

The title is misleading! Although Dean is right, the title should have read "Do not use CTEK charger for programming". CTEK chargers still do a great job providing a trickle feed especially in times like the present where we hardly drive our cars.

@BMWDoctor 3 жыл бұрын

title is misleading BUT if you put it for JUST PROGRAMMING people wouldn't click and I doubt people would get the message

@aidey 3 жыл бұрын

Hi, thanks for the advice - could/should you use it to update the maps software?

@pickleboat45 3 жыл бұрын

CTEK are NOT trickle chargers

@velocgee2874 2 жыл бұрын

@@pickleboat45 I thought battery conditioning was trickle charging?

@Maaniic 2 жыл бұрын

@@pickleboat45 If you leave them on they will start to tricke charge with their fancy float pulse mode after 10 days. I use it like that on my bike during winters.

@muchsunshine6037 3 жыл бұрын

Holy shit. Anyone know when the video actually starters? Mother of GOD!

@wilhelmtaylor9863 3 ай бұрын

Annoying as all get out.

@barrymartin7085 3 жыл бұрын

I have two Ctek chargers. One built into my 4x4 overlander and another which is stand alone in my workshop. I swear by them...... 15 years brilliant service

@bmbodger2010 2 жыл бұрын

They are great.. but 5 amp isn't enough for programming....

@roachmotel69 2 жыл бұрын

@Barry Martin Does your shop offer flash programming for high-end vehicles?

@helmedim 2 жыл бұрын

Do you advise Ctek for normal batteru charging at winter in the garage ?

@w0bblyd0inkb0ink 3 жыл бұрын

Looks like BMW branded CTEK?

@mcplutt 2 жыл бұрын

It looks exactly like a CTEK MXS 5.0

@kitcht 2 жыл бұрын

It is 😳

@newbeginnings8566 4 жыл бұрын

Most people are buying CTEK or another make for trickle charging/conditioning their battery... I do this with a NOCO to the under bonnet engine terminal points (as he shows)... On my Z4 that is a 2nd vehicle that is only used occasionally.... I do not see a problem with using it for this purpose (only).... As for programming uses I think that is another issue and the BMW Doctor has mixed up terms and uses....

@nohedes 4 жыл бұрын

Oh wow, that’s all rather melodramatic 😳

@kevinvandevelde9789 4 жыл бұрын

I new about the not jumping it from battery. I've seen guys using battery chargers to program. And seen some guys get nervous about battery voltage as they program. Great full for your knowledge. 👍

@BMWDoctor 4 жыл бұрын

Exactly mate there all over KZfaq these guys who state to use this they have no idea and I don’t even know how people follow there rubbish talk

@2015_Rubicnn 3 жыл бұрын

Yeah, you use a flash programming power supply that maintains voltage and adjusts the current output based on demand, sometimes over 100amps. They also have a clean DC voltage with minimal AC ripple.

@MrFredscrap 4 жыл бұрын

So it's basically a high output adjustable DC power supply set to running @ 14.2V and crucially 120A. given average battery chargers run on 10A max, you can see where it can go wrong. CTEK does have a 120A capable power supply, but that cost as much as that voltage regulator thingy, so it's a bit of a moot point.

@mrclowniuk 4 жыл бұрын

The Godfather of programming, your video is just typical selfish British comercial advert. Nothing explained, no comparison, just another typical advert.

@BMWDoctor 4 жыл бұрын

thats right thats why I need to make a advert I think its all about promoting NOT helping the people maybe thats what you want people that help im about advertisement

@BMWDoctor 4 жыл бұрын

You left here learning something at least !

@themikevlad 3 жыл бұрын

no, not British, on the contrary, most brits don't give a shit about anything in general. This man just has some unsolved issues, and a Trump size ego. It's funny to watch though :))

@TheKeenMechanic 4 жыл бұрын

Thanks 👍

@BMWDoctor 4 жыл бұрын

cheers vladi

@dazaussieguy1954 3 жыл бұрын

this is awesome u right on the mark mine the same my battery the boot and i have these terminals the front because its a computer and also when the mechanic starts the car he go onto these but ctek u saying dont use as a charger amazing my mechanic told me today i can use noco or ctek he family

@latanyaanthony3443 2 жыл бұрын

Thanks so much for sharing your time and knowledge 👍🏽😍.

@acewingdabson3139 4 жыл бұрын

Love your stuff man, keep it genuine! Been enjoying your helpful and informative as hell vids which have helped me and my N52 many times. ✌✌ P.S I had to get my IBS cable replaced which prevented the car from running, giving me a scare. DO NOT mess around with the battery sensors. Pröst!

@BMWDoctor 4 жыл бұрын

Your welcome mate

@jaymase3735 4 жыл бұрын

What are your suggestion for simply maintaining proper voltage on these batteries? I am not programming or anything, just attempting to safely keep the battery as close to the 14.2V when running, as possible. If I have to leave the car for a while or in severe weather, what type of trickle charger is okay? A 5 amp battery tender should be okay, correct? I know to connect it from the front terminals.

@eddieflores2852 3 жыл бұрын

Thank u for that advice!! Where can one buy that type of correct charger here in US? Stay blessed!!!

@erniehermosillo5201 4 жыл бұрын

What type of items should I buy for my BMW e46 to put on my oil engine and gas tank.

@dennisb5319 4 жыл бұрын

Keep up the good work.

@BMWDoctor 4 жыл бұрын

thanks mate

@mybrandnewfunk 3 жыл бұрын

Would you recommend using Noco Genius 10 to keep 12v batter life healthy?

@carlosrebuildinga500dollar9 4 жыл бұрын

Awesome videos bro you help me so much .do you have a video on how to properly add an aftermarket amp

@BMWDoctor 4 жыл бұрын

No mate I don’t BUT I will stay tuned for this

@philalvirez4614 3 жыл бұрын

can you tell if this use a range of high frequencies or just 1? if so, which is it ? thanks

@ridvan8632 3 жыл бұрын

Can i use the BMW Advanced Battery charging system instead to charge when I store my G30 in winter time?

@andriusdaugirda3972 4 жыл бұрын

stay strong!!

@BMWDoctor 4 жыл бұрын

always do bro strong and proud

@DitchPickler 3 жыл бұрын

So your specifically talking about the CTEK in the video. Correct? Would a CTEK Multi US 7002 12-volt charger work for Programming.

@ericconnelly1554 4 жыл бұрын

Hi, I have a new 2020 M4.... do you recommend some type of battery maintainer if the car sits? If so what should I purchase? Thx sir

@kirkchirrick 4 жыл бұрын

Can you tell me what might be wrong with my transmission? When I shift from reverse to drive my transmission jerks hard forwards. When I come almost to a stop, my transmission slightly jerks down to first gear.. my bmw 2013 328i has 120,000 mileage. thank you kindly for your help.

@dionysuspapadopolous4395 3 жыл бұрын

The title is a little confusing, after watching your video, I think you are trying to tell us Not to use a Ctek for programming. What do product do you recommend for maintaining a battery. THANKS FOR AlL THE GOOD INFORMATION. 365786BMW, 14 BMW'S so far!

@JrIza_914 4 жыл бұрын

what about using a charger using NCS Expert?

@antonvandermerwe9852 3 жыл бұрын

I have an E39 M52. I have been maintaining my battery through those charging points under the hood as you have explained. Yesterday suddenly, the charger has stopped working. It boots up, and checks the battery level, and then just cuts out. Why?

@therealzooch 2 жыл бұрын

Bought a device, the NEO socket, plugged it into my Murano and increased my mpg almost 10%.

@grocerylist 3 жыл бұрын

I want to do some programming on my 79 E26. Where can I buy this voltage stabilizer?

@breaking324 4 жыл бұрын

Hello I have a bmw f10 525D 2010 ...the issue is the car remote key doesn't work at all ...I have checked the anteenas in centre console and they work ..changed the diversity antenna and still the same issue ...i hooked up this cas4 in another bmw and it worked flawless ...can you help regarding this ? What could be the issue ?

@yanniskalaichakis4652 2 жыл бұрын

What’s the battery stabiliser unit that you use in this video mate? Got a G26000 today and still doesn’t seem to be working

@ezeckielthomas6798 Жыл бұрын

You're a great DIYer! 😉

@judge1231 2 жыл бұрын

I have a brand new agm battery that was shipped today. is it safe to give it the initial charge with this same model maintainer? it isn't installed in the car yet, just got tied if my 4 yo battery. I'm believing it will still send the pulse once fully charged. installing tomorrow. thanks alot. love your videos 📹

@antonyanastasopoulos4585 3 жыл бұрын

HI you can tell me what charger i need for my MB sl500 2004

@Kieran-dz2gb 3 жыл бұрын

If you simply want to recharge a dead battery that wont start is the Ctek 7002 ok or any battery charger?

@ahwee77329 3 жыл бұрын

Where do I buy that BMW maintainer for programming?

@idokwatcher2062 3 ай бұрын

Higher end CTEK models have "supply mode". Is that good enough?

@angelnoguera1209 3 жыл бұрын

In my 3 series I changed my battery with a northstar group 31 and a group 24 wired in parallel, i have audio amps connected, would I need to disconnect the amp wires? Do I need to disconnect the batteries and charge them individual? ( using noco genius 5)

@djgrand2 3 жыл бұрын

How about using the Ctek pro25s for programming. I mean setting the charger on the ”supply” mode. Is that okey?

@karolgrabka6013 4 жыл бұрын

That a good stuff shown bro. Hope you saved people cars now so they will kot even try to so the update wrong ways and killing they modules/cars...Keep it up Dean!!

@BMWDoctor 4 жыл бұрын

thanks Karol mate

@turn12396 4 жыл бұрын

I have a 1 series it is 2011 plate does it have warning for low coolant

@amranhussain2707 Жыл бұрын

Hi mate what trickle charger would you recommend for my m3 comp 2017. Lithium battery. Thanks

@joshuagoltz3001 4 жыл бұрын

what kind of programming are you referring to? battery programming? ok to use this or batteryminder chargers just for trickle charging?

@BMWDoctor 4 жыл бұрын

NO car programming , module programming on the car , updating the whole car

@Mangold108 3 жыл бұрын

Hi why should I buy optimate vs ctek in 2021? thanks

@deonsamaroo1031 2 жыл бұрын

Hello where can I purchase a voltage stabilizer I like in the USA. Thank you

@Fawkes-ent 2 жыл бұрын

So can I use NOCO GENIUS10 in 12v supply mode, I believe is outputs 13.6 from mains so basically is a battery like you said you can use a brand-new battery, so I guess it is the same?

@crispenthunder5723 4 жыл бұрын

Please advise when membership program will begin, thanks for the honest and great advice as always!

@BMWDoctor 4 жыл бұрын

It will begin once I finish it up I’m very busy at the moment and I’m working on it day by day with a lot of videos already ready to go membership will be £25.99

@silent_torseeker7741 4 жыл бұрын

Hi I have a n62 sonarscope points out noisy brake Vaccum pump I changed it 6 months ago with a 60$ part now making noise again I changed out same part and still makes noise any suggestions

@eugeneschafer6992 4 жыл бұрын

Hi little off topic if got a 2005 e90 330i with the older cluster it does not have the BC option for keys and daytime lights options is there a way to code it to enable it?

@manojmehta8188 2 жыл бұрын

Hi, I need your guidance how how to brighten the door ambient lights of the bmw320d spotline 2013 model. I consulted with bmw india and they said these lights are dim and can not be brighten. Thanks in advance

@410jman23 Жыл бұрын

What can you do if your trunk is locked on a f82 m4 and the Electronic disconnect switch (ETS) appears to be activated from accidently conecting and attempting to use a noco genius 10 as a tender. We can't get the car to start we have another ctek and noco 10 we placed under the hood and the noco says it's charged but when we try to start, it appears the battery has disconnected itself from the car.

@emmpak 2 жыл бұрын

This guy preaches wisdom! Ctek is a trickle charger NOT a voltage maintainer. You can BRICK your ECU on these expensive BMW cars.

@SubaruKtm Жыл бұрын

Wich stabilizer for Porsche Cayenne gts ?

@matthewstrange3778 4 жыл бұрын

What difference is there between connecting the voltage stabilizer to the connections under the bonnet vs directly on the battery terminals? The connections under the bonnet connect directly to the battery terminals anyway so they're not isolated from the ibs terminal. It shouldn't make any difference where you connect the stabilizer as long as it's +/- correct polarity. Could you please explain the difference in more detail as the connections under the bonnet are for convenience on a lot of vehicles and the safety aspect regarding sparks/ignition of battery gas/vapours when connecting jump leads etc. My battery is located under the passenger seat which is awkward for jump starting.

@Tazmannn12345 4 жыл бұрын

Man like doctor

@BMWDoctor 4 жыл бұрын

😂😂

@cal79 4 жыл бұрын

Is it good for trickle charging...like everyone is using them for when the car is just siting for a week ??? Obv from the correct points of conection

@LemonySnicket-EUC 3 жыл бұрын

Yes

@philalvirez4614 3 жыл бұрын

desulfation shows 8 hrs: why that time? and what was the voltage at start of stage 1 and at the end? this way we could learn what improvement we get with desulfation and in what time. and tried the manufacturer but no response. they just want to sell.

@rvarm21 6 ай бұрын

But it is better to be connected to the battery charger while doing stuff with ignition on than without it, right? I mean, it should take much more time to drain, isn´t it? Thanks

@mf1722 Жыл бұрын

Hi, so my radio went out.Also,my ac blows warm. What may be my issue

@TheGIAURI Жыл бұрын

Dude what can I use to charge battery? It's a good battery cars been standing for long and it doesn't have enough power.. I don't need programing just to charge

@alfde-kane6086 3 жыл бұрын

Can I jump start my x5 e53 off my e60 useing under the bonnet + & ~

@mitranasorinconstantin 2 жыл бұрын

Hello. This is good for programming ? gys gysflash 102.12 hf

@bacolando 4 жыл бұрын

How much is that stabilizer? Do you have a website were you sell it? I'm looking to tune my n54 + gearbox in the future and I wanna do it correctly. Love your videos man, keep it up!

@bacolando 4 жыл бұрын

@@BMWDoctor Thank you brother! I will send you an email the second I'm ready, I just need a few others parts first to make it right the first time 💪

@BMWDoctor 4 жыл бұрын

thats cushy mate dont worry

@kirkchirrick 4 жыл бұрын

What do you think about the Bavarian Scan Tool? Is it worth buying?

@BMWDoctor 4 жыл бұрын

Hell no it’s not ista is the only way

@kurtwm2010 Ай бұрын

I recently bought a CTEK - 40-206 MXS. I noticed that this thing gets awfully hot when in charging mode. Measures close to 115F (46C) . Is that normal?

@dazeboy79 9 ай бұрын

Dr. Dean, The Godfather! Thanks for the warning again!

@affioo_9778 Жыл бұрын

Noco genius 10 charger and maintainer good for ista-P?

@imyeg6 3 жыл бұрын

Would you recommend or ctek charger or similar to charge your battery once off the car? Or can you use the terminals on the front of the car with the battery in the car. Thanks

@robi4387 3 жыл бұрын

Always use the charge points under the hood/bonnet that's exactly what they are there for. RT M.

@randyfeguer509 2 жыл бұрын

Hi I watch your videos all the time about BMW's you really have these cars down to a science l can tell you know what your talking about and I really hope you can help me find a maintenance charger or what ever it should be when storing the car over the winter. My BMW is a 2009 328i 3.0 four door sedan. It's the nicest car I've ever had and I want to take care of if it the best way I can. I have a fully automatic Battery Charger Maintainer by Schumacher 3amp that will work on Standard AGM Lithium model SP 1297 connect and for get it. It's all I can't afford at this time hope I can use this without screwing any thing up but wanted to get your advice first please respond back to me as soon as you can I deeply deeply appreciate it

@WthaHatchet 3 жыл бұрын

Hate to tell you but thats just a Ctek charger with a BMW badge slapped on it. There is no difference. Take the cover off and you'll see. Otherwise good information. Always charge your battery to tip top before programming and use a voltage stabilizer.

@velocgee2874 2 жыл бұрын

@WthaHatchet...yep and it looks exactly the same as the Porsche branded battery conditioner..cos they’re all CTEK. Don’t think appropriate calling CTEK rubbish because a) believe pretty it is pretty much industry standard b) video is referencing its unsuitability for a highly technical process I doubt the product is intended for.

@ma02acjbeemer38 4 жыл бұрын

I’m not bored of putting this once again brilliant content again buddy 💪 I’m learning so much off you keep it up

@BMWDoctor 4 жыл бұрын

thanks alot mate and I appreciate your support bro alot its working good for me bro trust me now getting the support I need and i KNOW the next car will set this channel apart from the rest

@ma02acjbeemer38 4 жыл бұрын

BMW Doctor can’t wait you are so straight to the point I love it 👍 I am guilty of using KZfaq for answers and ended up in my ac schnitzer blowing up 😥

@BMWDoctor 4 жыл бұрын

Ma02acj Beemer exactly mate you know what I mean by the BRAKE CLEANER / DIYER guys mate that’s why I’m here now the realest to ever come across KZfaq

@paulfrost3501 4 ай бұрын

I’ve not interested in programming. Just interested to trickle charge up. That BMW charger looks like a CTEK mks5.0 12v 5amp. Only difference I can see that BMW branded says Li-ion instead of AGM on CTEK branded. I have a mini R56 Goodwood ( cooper S ) so looking for the correct positions to connect trickle charger.

@ShowMeWhatINeedToKnow 3 жыл бұрын

Is there anything reasonably priced that we can use to just keep the battery topped off in the winter? Or do we have to drive the car around aimlessly for hours when we have no where to go?

@LemonySnicket-EUC 3 жыл бұрын

Use the ctek charger for that.

@saudalzaza3590 3 жыл бұрын

Hi I have a BMW 2014 which i donot use often. Whatbisbthe best way to save my battry wail storege for months

@stephencresswell9711 3 жыл бұрын

CTEK is designed to do that, maintaining the charge.

@hilapizu5491 Жыл бұрын

Is it okay to use Ctek charger connected to the engine bay terminals while doing the electric water pump bleeding procedure?

@methanoid 9 ай бұрын

He never replies to messages on his channel..

@a9653192 3 жыл бұрын

So what if I want to keep my battery charged, and NOT do any programming. Just keeping the battery charged, can I use a battery tender to keep the AGM happy?

@frigginFin 3 жыл бұрын

Absolutely yes. I've used CTek for years with several cars and they work just great keeping the battery alive. Three weeks ago I woke up a car battery in -20C temperature just by letting the CTek do it's magic during the night. After that we've had even colder temperatures and the battery is doing just fine.

@LemonySnicket-EUC 3 жыл бұрын

I use the BMW ctek version with no issues for trickle charging.

@Biggles2498 4 жыл бұрын

So where do we get this voltage stabiliser please ? I have a BMW 2006 X5

@BMWDoctor 4 жыл бұрын

direct from me as im a supplier made in Uk

@ABDIF369 3 жыл бұрын

BMW Doctor How do I get in touch with you to get one I got a BMW X one battery is dying

@alstalda 4 жыл бұрын

😳.... Jeez!

@bobnixon1964 4 жыл бұрын

How can I stay connected and get access to future info/discussions, etc ?

@BMWDoctor 4 жыл бұрын

I will put it out in a community post when membership becomes fully active mate you will see the join button everyone is asking I haven’t finalised it all yet As I want to have videos there straight away as people join

@Mangold108 3 жыл бұрын

so OPTIMATE is better?

@TheNuscas 4 жыл бұрын

I have a 2013 BMW 320i xDrive. What charger do you recommend?

@Ally.MacMillan 4 жыл бұрын

You don’t use a charger for programming. If it’s just for normal battery charging then most smart chargers are fine, including CTEK. I’ve had no issues with nine at all.

@miguelesoinoza8752 4 жыл бұрын

thank you for your videos Help a lot

@bmw.source 3 жыл бұрын

Are you saying don't use the CTEK BMW OEM charger for charging the battery, or only to program/coding? Is CTEK a good battery stabilizer/charger for BMW? Which one is best?

@LeedsHypnotherapist 3 жыл бұрын

He's saying just when programming

@highflysugar 3 жыл бұрын

So I should connect it right to the battery and then I’ll be ready to program. 🏎😎

@bertrandls 3 жыл бұрын

You stole my joke! lol "So just to be sure...." LOL

@silvershark5232 4 жыл бұрын

Where to donate to get premium membership?

@dontworry828 4 жыл бұрын

I have BMW 535i 2013 I get a notification Battery Discharge, recharge Battery, and the mirrors stopped being automatic or acts weird. The dealer appointment closest one is a month and a half. People advised me to drive it around, I barely use this and I traveled a year and came and found this problem. The CTEK to me sounded weird and don’t understand why you need to open the battery when you can use the plugs under the engine hood, because when BMW charges your car they plug cables either from sort of generator or a wire dropped from above (seems like your method but 100kg heavier). Any advice? Should I worry? Or just start moving it around a couple of hours?

@dylan-nguyen 4 жыл бұрын

Just get the battery from dealer, swap and register. Dealer can register in 5min...

@AlabamaTree Жыл бұрын

What is programming?

@JrIza_914 4 жыл бұрын

I bet that you rapping in the intro?

@jonl6280 3 жыл бұрын

Can I use the ctek mxs 5.0 on my 320d 2009, to trickle charge my battery when I'm not using the car?

@bigbadjonrob1 3 жыл бұрын

Yes, the title of this post is misleading. If you are charging your battery thats fine AND the BMW charger is MADE BY CTEK. If you want to re-program the way your car runs (and you don't know what you are doing, follow his video). The majority of people who stumbled on this (like me) just want to charge the battery - not to mess about with the way the car runs.

@santiagolassalle9141 3 жыл бұрын

If i join can you help me with the power draw on my e90 2007?

@basman188 4 жыл бұрын

Deano bang on the ball again 👍 A battery charger is for charging batteries and not for programming modules. Your asking for a bricked ecu! I use the gysflash 100.12 hf even for the small progamming jobs and for remapping. Measure twice cut once its all about using the correct tools for the correct jobs. Keep the top content coming deano 🙏

@alinrusan8054 4 жыл бұрын

What set up you have for programming ? Did you use diagnostic or you go on hide menu for power supply mode? Thanks mate

@clos19851 4 жыл бұрын

The title is overkill.

@christianperles9780 3 жыл бұрын

Is that bmw one ok to just use when storing the car over the winter tho?

@LemonySnicket-EUC 3 жыл бұрын

Yes it is. Just not for programming.

@bend__ 4 жыл бұрын

I'm searching for an affordable voltage maintainer for a while now. I'm only coding and programming my own car. Ever since 2010. I am not looking for something expensive as it is for my own car only and not for professional use. maybe I will use it once or twice a year at most. But for DME and EGS and CIC I just want a regulator connected. which one is afforable and good for my own personal car without spending 1000+ Eur?

@BMWDoctor 4 жыл бұрын

my friend there is NO kind of stabiliser for under that trust me on that these are not cheap at all this kind of stuff is not cheap thats why its ok for me as most products are sent to me but for the average person its near impossible as it constantly changes every day

@rotorblade9508 4 жыл бұрын

When coding obviously the carger is low power, but for jumpstart whether you connect the rear or the front terminals it should work. If connecting directly to the battery there will be a voltage increase at the terminals from say 10V (dead batery) to 12.5V or if the other car is running to 14.4V. The 12.5V is as if the battery was charges so what’s the problem? Also with 14.4V the high amp cables lead directly to the front I suppose so it’s the same thing, except there will be less power loss if connecting the front terminals because the circuit leads directly to the starter so a slightly higher peak current

@BMWDoctor 4 жыл бұрын

There you go you have it in one Herman engineering at its best the reason they have them ports at the front is simply to get the power to the car quickly and safely incase or jumping with no damage done to the car ALSO for programming to not overload the circuit

@hermanyuen88 2 жыл бұрын

Hi BMW Doctor, How are you? I think the topic of this video brings us confused. Do you mean the mentioned charger is not suitable for programming purposes? If so, would you mind to prepare a video to teach us how to charge/maintain the battery for the recent decade BMWs with the battery charger at home? Thank you in advance!