Excellent step by step video. Thanks so much for making it. You're a champ.

Amazing video, and much better than removing forks and doing it the hard way. Thank you for posting this for everyone to see.

The best vid for changing your oil without removing your forks...Good job👍

Great video, explained it better than Honda service manual did!

Very good job. Thanks very clean and brief but complete.

Thanks for the very educational video, you made it look very simple.

postupno je decko objasnio .Excellent step by step video

Great help, thanks👍🏻

great video. going to install intiminators on my TA600 PD10 soon. this is certainly handy. thanks a lot.

great video

Thank You, great explanation.

Thanks for this great video. I have to do the same on my pd10 Transalp. Great job. 👍💪

Good job mate.

Very good video

Thank you mate

Nice work ^_^

good job! thank you...

Clearly and simply explained. Thanks

Thanks for the video, great . i put out the complete fork so i could also renew the dustcovers

Thx .. Great vlog ✊️

super video! danke dir sehr!

Very very helpfull !!! Thanks a lot.

Thanks a bundle. Большое спасибо за видео.

Thanks, nice DIY :)

THX for this video.

Very good video! How much oil I should put in the each fork?

Bon travail mon amie

Helpful video

Спасибо!!

Suomi ? Thanks buddy .... didn't fancy taking the forks off completely :)

Great vids dude, i have learn a lot from you ! What you think, i have Suzuki DR 650 rs and i´d like to cut off and grind to smooth those front mudguard attachments ? Is there any chance a telescope oils comes out ? I dont have a stock mudguard, i have chanced the Polisport bigger motocross style mudguard and i must say those attacments look stupid because there is nothing on them. Sorry my english i´m Finnish :)

This is the best method I saw. Tanks, man!

Thanks

Congratulations, perfectly explained... Do you have anymore for same bike? Regards

Thanks, inspired to do mine. By the way, your vid about changing clutch and primary chain is no longer there?

Excellent what was the length of measure on the Allen key for oil in mum, thanks looks a better way to change oil

Incredibile. Forks for bicycle. Now i understand The Low power that Have these bikes.

Hi! What if I pour white petrol in it while mounted? Does it help to clean it better before refilling with oil? Great video!!

Super.Wielke dzięki.Pozdrawiam.

Exelent

good job man...;-p

Thanks for your video very interesting an clear, good work. A question for you, ¿do you notice a clear improvement in the bike dynamics?. For example whith your front brake blocked, if you push strongly against ground, ¿does it a "doing, doing" movement up and down two or three times, or recuperates cleanly?. It's what happens with my XL650V but I don't know if changing forks oil is enough or I must add some preload adjustable caps, or may be replacing the springs. Perhaps all together. ¿Do you have an idea, or a friend of you?. Thank you very much.

Que largo tiene la llave alen en milímetros para medir si quedó a nivel el aceite . Gracias

first. good project

I would with moderate to heavy use change the fork oil every time I do the valve adjustment or the second small service (every 12k-18k).

hello thanks, unscrew below is there no danger of losing the pump bushing? then not be able to screw anymore? Thank you

I did that on a piper 140, but had the gear down all the way, filled to the top with oil, and while under the wing pushed the gear up, twice, LOL. shot up 2 1/2 stories to the hangers roof, LOL. We didn't know what was going on sitting under the wing, which explains the second time.

I will have to do this and change the cooling liquid to in radiator and change the rubber thing on front fork , both . Mine is 95 y production with one front disc .

Bravo sei molto chiaro e preciso io ho fatto il cambio delľolio come ai fatto tu grazie

service manual recommends 5W ?

Hello what about neutral green light some times I loose the neutral position . The switch is ok I want to know how fixed from inside? There is any video about it?

Muy bien

Nice video but doesn’t manual recommend ATF?

Brilliant, I wonder if the forks are the same on the transalp 650

People actually think that is necessary to take off forks for oilchanges,and this is lazy half assing. However there is plenty of factory service manuals of older bikes especially consumer bikes like Suzuki katana for example. They show in the manual exactly the way he showed it here. Unbolt the screws and caps, drain, rescrew ,replace oil, pump to fill cavities, retighten. Done. Its common for cheaper more rugged and less performance oriented bikes to have easier and cheaper maintenance. Altho deep cleaning reaps its own benefits it requires more tools and skill,also time. Where this way you would actually be more keen on doing the job sooner and more consistently which can only result in smoother ride experience overall.

Hello , what tires do you run ?

It's the same for honda nx 650 dominator 1999? I think so because the forks are pretty much the same,but I would like to hear your opinion. Thank you for the video

Hi! I also have a XL600V. Did you notice much difference in suspension behavior after oil change? Does it perform better soaking up holes or bumps? Thank you

How many grams did you pour into each pen?

I tried to do it but the screws that are under forks are moving with inside part of forks. So i guess i will give it to the workshoo :(

And Donn is it an improvement?

Thanks for the video, it's not necessary take apart the forks , for the oil change? In the majority of the videos it's the rule

I'll do this tomorrow this video is really good. clever clever. but why do you have 2xbrakedisks and a PD06A lamp mask ?

friend to see if I understood correctly, 550cc fork oil and 125mm from the upper edge? What if I use sae15w, I always use it on the highway and I weigh more than 100kg. Thank you very much and best regards

Did ya get that internal chain you needed for the oil pump yet.

What tire is this?

does you know if its the same as transalp 650 ?

Can the fork oil be changed this way on normal Cruisers? Or is this way unique to adventure bikes?

Hi When I start the engine of my transalp I have to keep the throttle turned for a moment or she turn of either in Sommer. only on cold start after the engine is hot it's ok. Witch parts in carburettor I have to check?

nice video! easy peasy cheasy squeezy :D

I have noticed a strange noice in the fork after oil change. I guess it is relevant with some staff inside the fork which was disconnected when I screwed out the left bottom bolt

Hello i have one question whats name of the fork oil then you using in the video?

Engine oil works just as well, Castrol Magnatec 10W-40

Changing the fork seals on a yamaha wr125x was not a fun thing to do..

cab I ask when/why should you change fork oil?

Hello man... I'm from argentina, I have a 1996 transalp, my question is the cuantity 550 or 515 cm3 in each barral?

Ma teadsin, et see aksent on eesti oma :D

А 700 тоже так можно?

Podías limpiar interiores

Just put hyper pro springs and 20 w oil in mine

Ile trzeba wlać oleju?

Lleva 549 cl. De aceite

How deeply measured? because I am deaf and do not hear what you are talking about.

Why you didn't compressed the forks up till screw the top fill cap, due to dispose of the air within them 🤔🤔

best way to is to measure exactly what comes out and put the same amount back

Can't hear you

деньги на ветер. Менять масло надо с полной разборкой и промывкой. это не сложно. а так только в сервисе вам поменяют.

video 3:23

Honestly its not much more work to just pull the fork tubes out and let them drain overnight upside down. Schedule it with a front tire replacement. Easy Peasy.

hello thanks, unscrew below is there no danger of losing the pump bushing? then not be able to screw anymore? Thank you