Door Slammer Build: 10 - Window Installation

No video

Door Slammer Build: 10 - Window Installation

Рет қаралды 60,985

Күн бұрын

Ever wonder how to install windows on a car with a composite body and doors? Watch and learn.
Be sure to subscribe to our channel or like our pages to receive notifications of the latest video releases.
Shop Window Kits - timmcamis.com/s...
Shop Drag Racing Components - timmcamis.com
Drag Racing Tutorial Videos - dragrace.academy
The information contained in this video is based on the opinion of Tim McAmis and his 30+ years in the motorsport and manufacturing industries. Any action you take based upon the content provided shall be done at your own risk. TMRC and its affiliates are not liable for any losses and/or damages in connection with the use of this information.

Пікірлер: 25

@WreckerCentral 5 жыл бұрын

Border paint what do you recommend ive fought this for years. Used everything from rc paint to rattle can from wally. Found the best that works for me is oil based rustoleum gloss black from the hardware store and brush it on. Its messy and time consuming.

@Timmcamis 5 жыл бұрын

This is what we use - timmcamis.com/shop/window-trim-paint.html

@cagedruss 3 жыл бұрын

how do one get out if the door does't open. Other series require the window frame to be removeable in an emergency.

@vaioskaliakoudas6388 6 жыл бұрын

Is the window kit available even without the acrylic window itself?

@jayer-su3hu 5 жыл бұрын

Wish I knew how to keep these lexan windows from spider cracking around the screws. I don't tighten them too tight.....

@ramonbodie513 3 жыл бұрын

i guess I'm kinda off topic but do anyone know of a good site to watch newly released series online ?

@sterlingronnie9739 3 жыл бұрын

@Ramon Bodie flixportal :P

@ramonbodie513 3 жыл бұрын

@Sterling Ronnie Thank you, signed up and it seems like they got a lot of movies there :D I really appreciate it!

@sterlingronnie9739 3 жыл бұрын

@Ramon Bodie no problem xD

@brandonbmx7300 Жыл бұрын

Can you make your own windows ?

@dimitariliyanov3680 8 жыл бұрын

Hey Tim. I will probably be buying one of your beautiful rear end housings and a 4 link suspension system. Can you give me tips for choosing the right size one? Should i set the IC in such way that rear end doesn't "squat" and will this mean that the rebound and compression setting on the rear shocks won't be so important,since they won't be moving much (or at all)?

@Timmcamis 8 жыл бұрын

Dimitar, it will greatly depend on the type of car the set up it will be going in, (chassis type, tire size, power levels, etc.) I would suggest calling our shop (636-338-4912) and speaking Billy or Ed. They can help give you some more specific answers for your application.

@dimitariliyanov3680 8 жыл бұрын

+Tim McAmis Performance Parts The chassis we just bought is built by Jerry Bickel,comes with a 63 corvette body. It doesn't have a rear end,but has fully adjustable 4 link tim mcamis brackets. The car has front struts from Jrbrc and double adjustable koni rear shocks. I would have called but i'm living in Germany and the phone bill will probably cost me the kidney i didn't sell( 😂😂). Do you ship oversees actually?

@dimitariliyanov3680 8 жыл бұрын

By has koni rear shocks i mean it came with them

@Timmcamis 8 жыл бұрын

Dimitar Iliyanov We ship overseas every day. If you email info@timmcamis.com they will be able to answer the questions through email as well. Thanks!

@177racing 8 жыл бұрын

also I would suggest doing some homework on anti-squat and anti-dive. there are several good online articles covering that online.

@RecklessRegal 8 жыл бұрын

At what point are the upper window latches required?

@Timmcamis 8 жыл бұрын

It really depends on the car type and body. If you start to notice the windows being sucked away from the body during a run, it is definitely time. We've seen this happening on some cars right under 100mph. Others, where the body creates a small lip before the front edge of the window can sometimes be ok with having no upper latch.

@lotuselansteve 4 жыл бұрын

@anonymous The amount and thickness of extra struts capable of resisting the suction at speed would add more weight than that saved by fitting polycarbonate windows in the first place!