No video
Double Braid Eye Splice For Beginners
Рет қаралды 43,764
Күн бұрынIn this video, Evan (Pro splicer) gives a detailed explanation of how to splice double braid rope, and Jess (Beginner splicer) try's to replicate his instructions.
Splicing Tips / Common Questions...
Where do I get splicing tools? - rightrope.com/...
Where do I get double braid rope? - rightrope.com/...
The splicing technique in this video is for class 1 double braid rope. If you have a class 2 (core dependent) rope then you will need a different technique. If you have a 32 or 48 carrier rope, pull out 4 sets of strand when tapering the cover. If you have a 16 carrier rope, only pull out two sets of strands.
Don’t have a fid? You can find measurement tables online for fid lengths.
To pass the rope back through itself, you can use a small wire (like piano wire) but make sure to insert in the exit point, and out the entry point to pull through!
These videos and animations are for informational and entertainment purposes only, and should not be considered to be correct or reliable instructions. Right Rope LLC disclaims any and all liability related to the use of this content. Be sure to consult a competent professional before using rope for any purpose.
The rope used in this video is our Double Braid Nylon Rope:
rightrope.com/...
Some Highlights about this rope - rightrope.com/...
- Very strong
- Durable
- Excellent elasticity
- Made in USA
- Great for anchor / dock lines and towing
Some details about this rope...
Our double braid nylon rope is made in the USA from 100% high-tenacity nylon yarns. Double braid nylon is the right choice for any application where some stretch is required to mitigate the chances of rope failure or you need a very strong, durable rope with the elasticity to be able to withstand shock loading. Great for anchor / dock lines and towing.
These ropes are made by expert rope makers using modern braiding equipment and meets or exceeds the standards set by the Cordage Institute specifications for high-performance ropes.
Double-braid is typically the strongest construction of rope and has a braided inner core and a braided outer jacket. This rope construction is torque-free and will not hockle or kink, and can be easily spliced. Nylon has excellent abrasion resistance and ultraviolet degradation protection. Our premium double braid nylon ropes are also resistant to rot, mildew, marine growth, chemicals and petroleum products. These high-strength ropes are soft, flexible, and are easy to handle.
At #RightRope, all of our ropes are in stock and ready to go. We offer fast, same-day shipping on all of our products. When you shop RightRope, you can be sure you’re getting the right rope at the right price.
Times:
0:00 | Intro
0:28 | Disclaimer
0:35 | Tools needed for double braid splice
1:00 | Secure your rope
1:15 | Mark your cover and form the eye (Evan)
1:33 | Mark your cover and form the eye (Jess)
1:59 | Extract the core from "Mark B" (Evan)
2:23 | Extract the core from "Mark B" (Jess)
3:55 | Taper the cover (Evan)
5:05 | Taper the cover (Jess)
9:57 | Milk the slack to "Mark B" (Evan)
10:05 | Make "Mark 1", "Mark 2" and "Mark 3" on core (Evan)
10:32 | Milk the slack to "Mark B" (Jess)
10:48 | Make "Mark 1", "Mark 2" and "Mark 3" on core (Jess)
12:09 | Insert cover from "Mark 2" to "Mark 3" (Evan)
12:43 | Insert cover from "Mark 2" to "Mark 3" (Jess)
14:46 | Insert core into cover from "Mark A", past "Mark B" (Evan)
15:45 | Tighten crossover (Evan)
16:04 | Insert core into cover from "Mark A", past "Mark B" (Jess)
18:15 | Tighten crossover (Jess)
19:14 | Taper the core and cover (Evan)
20:22 | Taper the core and cover (Jess)
22:30 | Bury the core and cover strands (Evan)
22:47 | Bury the core and cover strands (Jess)
23:26 | Milk exposed core down inside cover (Evan)
24:04 | Milk exposed core down inside cover (Jess)
25:08 | End Whipping 1st step (Evan)
25:53 | End Whipping 1st step (Jess)
27:12 | End Whipping 2nd step (Evan)
28:36 | Burning the end (Evan)
29:05 | Trim and burn the ends (Evan)
29:27 | Completed eye splice (Evan)
29:29 | End Whipping 2nd step (Jess)
31:52 | Burning the end (Jess)
32:38 | Trim and burn the ends (Jess)
33:08 | Completed eye splice (Jess)
33:15 | Outro
Our Website - rightrope.com
Like us on Facebook - www.facebook.c...
Follow us on Instagram - / right.rope.home
Email us at - info@rightrope.com
Call us at - (616) 577-5105
#splice #doublebraid #howtosplice #splicing #splicer #learning #learn #rope #teacher #beginners #educational #boating
@robertjohnson957 5 күн бұрын
We love the way you teach this via a team… super effective and helpful. Thank you!
@dskeywest 2 ай бұрын
Great video...the teaching technique of showing us once, and then having a novice do the same thing, is very effective. Great job.
@billmiller3918 Ай бұрын
I’ve never successfully spliced double braided rope. Tomorrow I’m following your instruction on 10mm rope (no idea what that is in imperial measurement) which is thinner and I suspect a lot harder to do than your 12 or 18mm. It is definitely the best instructional video I have seen on splicing. Thanks so much. I’ll let you know how I go.
@billmiller3918 Ай бұрын
Nope. I just couldn’t get the core to slip back past the exit at the first spot where I pulled the core from. Two cores just will not fit. At the one time. Am I using the wrong braid? What is the trick?
@johnsmythe1744 5 ай бұрын
Finally a video that worked for me! I had trouble keeping up with jess but so glad she is there. Thanks again
@hhhiop4968 3 ай бұрын
Really great instruction and patience. The first time what you are doing doesn’t seem to make much sense but as you see the core and splice disappear you can see the results coming. I loved how precise she was being measuring fid lengths and tapering!😊
@gabrielcowan4948 10 ай бұрын
Good job guys, I love that both of you are doing it together. It reaffirms what you're teaching 👍
@emiliojtorres-requena9558 18 күн бұрын
Without a doubt the best video on double braid splicing. Thanks Great job!!!
@elizabethhaines6299 Ай бұрын
Video helped me immensely! Appreciated the format!
@TheShawline 11 күн бұрын
Thanks so much, lovely job and instruction.
@SENji045 2 ай бұрын
Great tutorial. Why do you taper the cover? What is the reason behind it?
@danodell3079 Ай бұрын
Thanks for the vid. It took a minute or two to finish it off due to 2 internal cores.. but got there and it looks good. 👍
@rosedunham9323 10 ай бұрын
Good job, Jess!!!
@reloadncharge9907 9 ай бұрын
Very good video, explanation! Thanks, Andrew
@michaeldenicola6725 4 ай бұрын
That was very helpful thank you for sharing.
@tomstarrbrad Ай бұрын
Just a realization that made it a whole lot easier for me to follow the process: MARK-letter is on the cover. MARK-number is on the core.
@mattlangdown94 2 ай бұрын
Just attempted my first splice. Got stuck at putting the core back in the cover. Had to cut the splicing needle out. Any tips to avoid this?
@try44 Ай бұрын
How do you extract the core so easily?
@jamesmillar1128 3 ай бұрын
Passing the core back through the cover from A to past B a fid length ... you make it look so easy ... I used a bloody hammer and it was so tight the core came detached from the fid, leaving the core stuck and unworkable further !!! Had to abandon and cut off the half done splice. You must be using special easy rope. Would like some real world help without the jolly music !!
@akredalfbutler 6 ай бұрын
Easy on a thick rope like this but much harder, if at all possible on small sizes.
@Nordjyden9000 Ай бұрын
The part starting at 16 .25 is just imposssible. Putting the core throught he first empty part of the cover is OK, but once you get to the point where the rope is íntact -full core and cover - at 17:09 no measure of force or coercion or milking more cover from the end will get it a full fid length as in 17:39. There must be another way of doing it.
@theronhoward5413 6 ай бұрын
Where can I purchase a fib for a 3/4in braided rope Can I get it form you if so please send contact info Thank you
@aluminiumsloep 3 ай бұрын
The music is killing me...
@PurpleNovember 8 ай бұрын
8:44 I use a seam ripper on smaller 12 strand ropes for the taper. Sometimes thread snips are needed to cut the strands but a good sharp seam ripper will usually cut right through. It’s just easier for me than scissors. I haven’t tried it with double braid yet but it looks like it would work fine.
@RodolfoCaubet 3 ай бұрын
excelente
@brunolaflamme5202 7 ай бұрын
Outstanding tutorial, I would buy supply from you, I will working on 13 mm double braid polyester arborist rope, any items number for the right rope fid, the whipping cable and the needle? Are you shipping in canada? Thanks
@bridlewooddressage3617 5 ай бұрын
Can I splice in an eye in a 5/8” thick COTTON rope? The core doesn’t slide easily…but I need a loop at the end…not for sailing;) Thanks!
@johnrhodes3350 5 ай бұрын
I don't know what to call it, but there's a more traditional sailors way of splicing, where one is basically unravelling the rope and plaiting the two back together. The technique on this video is best suited to the slippery synthetic rope, particularly with an outer sheath. There's certain to be loads of tutorials here on KZfaq.
@RightRopeOfficial 5 ай бұрын
To use the technique in this video, it would have to be a double braid rope, which would be suprising for a cotton rope. If it is a different construction than double braid or 3-strand, it likely isn't spliceable.
@Branno46 10 ай бұрын
To complicated mate it’s impossible your an expert don’t think everyone is the same by watching a video mine looks a mess 😊
@dichotomousblue 8 ай бұрын
Which wrap it if its already locked?
@edwardmyers8782 3 ай бұрын
Artistic licence? Antifray
@brianjohnston4207 7 ай бұрын
>Mark 2 on the core is one short fid, mark 3 should be one short and one long fid from mark 2.
@travisweaver1805 4 ай бұрын
omgash lol when does it ever take 3 entire seconds to pull out a core?? also when does the last step of milking the core back into the cover ever happen that easily. it would be nice to see real world splicing, good theory, but not practical as it doesn't address issues like taking hours just to pull the core out of the cover, then pulling the line to get the core to go back into the cover is almost always too big to actually fit back inside the hole, and the core bunches up as you pull, it's never as easy as these videos make it out to be.
@brianjohnston4207 7 ай бұрын
It's easier to mark the cover but wait to cut ot out the strands after you run the cover through the core. We pull out every 5th pair to taper but whatever works for you I guess.
@user-du8px2wu2x 4 күн бұрын
The lasting the woman does is incorrect at the end. The stitching goes through both sides. She did it between the two ropes. The instructor did it correctly.
@seadeebee2919 8 ай бұрын
Meaning the space is too thin to pass through a double core and a fid with tape on it. There has to be a technique for this but none of the experts on videos will explain it. Very strange
@alvaromejiascabeza477 6 ай бұрын
Wire fid
@try44 Ай бұрын
I've read on forums that people use a smaller fid or they use a coat hanger and pull it through instead of push.
@seadeebee2919 8 ай бұрын
I have watched so many videos of this splice. Not ONE explains HOW to pass the fid and rope through. In reality it is impossible see 17mins on your video. Too thick by far. Rope comes off inside. It would set someone asside from the rest if they can only explain HOW to pass this fid through the space that is clearly too thin!
@alvaromejiascabeza477 6 ай бұрын
Wire fid..
@julianmallett8990 5 ай бұрын
That's exactly the problem I have. At that point you have the core and cover and that has to fit in to a section that already has a core. That means you have 3 times the original inside the outer core. I just can't get it all in
@patrickfitzoot 4 ай бұрын
Milk a bunch of cover towards that tight spot until the cover is slack there and it will go. What Evan doesn't mention is that used rope makes this splice difficult to almost impossible.... it is possible but you need to move the cover around alot to bring some slack into play
@davetownsend7120 4 ай бұрын
I have watched both of your videos 100 times i've wasted more rope you're not telling us something you can't do it the way you're doing it no way no way can you do it you're tricking us or something it can't be done you should take your video down
@user-du8px2wu2x 4 күн бұрын
The key is to ensure you have the correct FID diameter. The last step of feeding the core is easier if you use a smaller diameter FID BUT ensure you use the lengths of the correct FID. It’s difficult but works well. Very hard the do the very last step of pulling everything back into the rope.
@nickp592 2 күн бұрын
Watched the short video first then the long one and did it just fine
Knotting Knots
Рет қаралды 2 МЛН
Emily & Clark's Adventure
Рет қаралды 93 М.
WesSpur Tree Equipment
Рет қаралды 154 М.