DOWNDRAFT sanding table (Part 1) ** Superior filtration ** Easy cleaning **
Рет қаралды 8,433
2 жыл бұрынHow to build a high efficiency downdraft sanding table that requires no filter cleaning and minimal dust cleanup. TUBE FILTER KIT www.oddballgallery.com/downdr...
Hole Template www.oddballgallery.com/downdr...
Dayton Squirrel cage blower amzn.to/3rrU9Gr
Router guide bushing amzn.to/34ZS1OK
1/4" carbide straight bit amzn.to/3A6gP37
Senco fusion cordless nailer amzn.to/33x7Fk2
Fastcap Bi-focal safety glasses amzn.to/33q2Fh6
Flush trim bit amzn.to/3Ifgm1m
Mirka Deros sander amzn.to/3FEogzE
Fastcap powerhead screws amzn.to/33JPYgS
@Kevscancave Жыл бұрын
Love the template! That certainly will help👍😎👍 Test holes definitely 👍Thanks!
@Kevscancave 2 жыл бұрын
You “had me “when you said you haven’t had to remove the filters on your big sanding table in 25 years! Lol! You’ve taken your proven concept and adapted it to a smaller sized table that hobbyists like myself can use! Thanks for taking the time to make the videos! All the best to ya!
@ODDBALLGALLERYKeithWilliams 2 жыл бұрын
Thanks Kev👍🏼
@AndrewWade77 2 жыл бұрын
You have some of the most ingenious and original ideas. I’m surprised more people don’t follow you on here. Hope you’re doing well during the pandemic. Cheers
@ODDBALLGALLERYKeithWilliams 2 жыл бұрын
Thanks Andrew👍🏼 I am doing well. This year has been slow, so I thought I’d try some more vids. Still trying to figure out which direction I should go with KZfaq. I try to think of original ideas, but the views don’t always pay off for that. One of my most viewed vids is a basic shop vac video. Thanks for watching- Keith
@AndrewWade77 2 жыл бұрын
@@ODDBALLGALLERYKeithWilliams Yeah, it’s a shame. Another channel I like with original ideas also has a very small following (Walnut Workshop). Well, best of luck to you in everything 👍
@nickfults7312 11 ай бұрын
I really love this design, planning to buy filter kit asap. One question I like the wood strips but do you think if I used a piece of peg board on top with less strips to allow the air flow but still support the peg board that id restrict the air enough to get a good suction across the peg board?
@ODDBALLGALLERYKeithWilliams 11 ай бұрын
My initial thought is that the air will take the path of least resistance. I think you would need to close off all sides of the pegboard to force the fan to pull through the small holes. I think you will have much less free open area to air draw through ,although the air will be flowing faster. My goal is to get as much air flowing down as possible, the fine dust will follow it.
@timjohnson9078 4 ай бұрын
How many microns do those filters filter down to?
@benjaminbrewer2154 2 жыл бұрын
Is there enough suction to run the sander off the same collection?
@ODDBALLGALLERYKeithWilliams 2 жыл бұрын
The cfm is there but not the ability to overcome the static pressure of a small hose.
@bryanmoir3184 Жыл бұрын
Nice work! I have 2 questions. Can the area not over the tubes be used for sanding, and will the downdraft from the tubes pull the dust down? Second question, what is the thickness of the felt?
@ODDBALLGALLERYKeithWilliams Жыл бұрын
Hey Bryan, This table is really sized for one person use. The best air flow is on the filter side. However, if you were sanding a larger door or shelf and covered up part of the tube holes the airflow would be redirected to the edges of the panel on the non filter side. The design I have for a 48x48 table has filters on both sides for 2 sided use. The filters are 16oz felt.
@bryanmoir3184 Жыл бұрын
@@ODDBALLGALLERYKeithWilliams Thanks Keith for the reply. I am just a weekend warrior looking for solutions to keep my wife happy! :)
@ODDBALLGALLERYKeithWilliams Жыл бұрын
@@bryanmoir3184 I am working on a new video that will update this design a little. The price of the blower I used has doubled since I made this video.
@bryanmoir3184 Жыл бұрын
@@ODDBALLGALLERYKeithWilliams Looking forward to seeing the new video Keith! Everything has gone up in price.
@woodaddict1 2 жыл бұрын
Great project but $240 for the filter kit seems like a lot!
@ODDBALLGALLERYKeithWilliams 2 жыл бұрын
Yes, they are not cheap. When you consider they filter to sub 1 micron and you will not have to even touch them again for a very long time it is a bargain. For comparison 14 of these tubes have the same surface area as five -20x20 MERV 15 pleated filters, (about $75). Pleated filters will have to be blown out or replaced regularly.
@woodaddict1 2 жыл бұрын
@@ODDBALLGALLERYKeithWilliams good point, I wonder if they could be made from sheets of that material?
@ODDBALLGALLERYKeithWilliams 2 жыл бұрын
@@woodaddict1 Yes, the filter could be custom made in any size. The reason I use a lot of smaller diameter tubes is to get as much surface area as possible inside the cabinet.
@woodaddict1 2 жыл бұрын
@@ODDBALLGALLERYKeithWilliams how much just for the filter tubes?
@ODDBALLGALLERYKeithWilliams 2 жыл бұрын
@@woodaddict1 They are $10 per tube.
ODDBALL GALLERY - Keith Williams
Рет қаралды 2,6 М.
Sawdust and splinters
Рет қаралды 77 М.
Carving Fusion : By Jordy Johnson
Рет қаралды 9 М.
Stumpy Nubs
Рет қаралды 73 М.