How does the DPF particle filter regenerate itself on the way to the BMW E60;
I watched how the particle filter works and I noticed that we don't have to go on the highway to run the car, it regenerates on the national road between 2,000 and 2,500 rpm without problems if the car has the optimum temperature and the filter needs regeneration;
What I noticed needs regeneration:
-Engine temperature over 75 degrees;
-The car should not have errors;
-Diesel in the tank (over a quarter should be the needle);
-Regeneration is activated after the filter is loaded over 40 grams;
-At least 5 minutes stretch between 2,000 and 2,500 rpm;
-When activating regeneration takes about 1-2 minutes;
-Gear speed 3, 4, 5, 6 (in gear 1 and 2 I saw that regeneration does not start);
- On average after 200km done in the city the filter is loaded and needs regeneration;
BMW DPF Particulate Filter;
DPF BMW E60;
BMW E60 particle filter;
BMW E60 particle filter regeneration;
Program used: Bimmerlink with BMW OBD: l.profitshare.ro/l/9592594
🔵 Vlog Channel: / ionutrusuct
🔴 Tech Channel: / rusucttech
Car: BMW E60 530XD 2006
What phone am I using: l.profitshare.ro/l/9612771
GoPro10: l.profitshare.ro/l/9612747
Media Mode: l.profitshare.ro/l/9612766
OBD BMW: l.profitshare.ro/l/9592594