Draining and Cleaning my Taylor Wood Boiler

Рет қаралды 5,800

2 жыл бұрын

In this video I'm going to show you how to clean and drain your wood boiler. I haven't seen a lot of videos on how to drain a taylor water stove so hopefully this will help you out. I have a t 450 and it holds 312 gallons of water.
Owners Manuel
drive.google.com/file/d/1zARZ...
Parts
www.taylorwaterstovespringfie...
Cleaning products
amzn.to/3X5EXhH

Пікірлер: 34

@TreeIing 2 жыл бұрын

I had to do my research to make sure you were really Theo vons cuzin... that's crazy dude. Thanks again Theo vons cuz

@Private680 2 жыл бұрын

You’ll find those top heat exchange tubes are much easier to clean during the refire like when you refilled it after cleaning the tank. Once you get over 100 degrees, turn your blower off, scrape/brush out the tubes and turn your blower back on for 10 mins and repeat until you’re down to metal. The longer burn and hotter firebox melts that crystallized creosote pretty fast. Will save you some elbow grease, just make sure you protect your skin, that melted creosote is sticky and will be hot enough to cause burns.

@kevinkirgis1174 2 жыл бұрын

I have a Taylor 750 21 years old excellent stove I throw in 2 or 3 aluminum cans every morning for creosote I don't have very much creosote at all

@codykingsworld 2 жыл бұрын

Thanks for the tip I'm going to try that. Do the cans fill up with it or what?

@robhouchin8995 2 жыл бұрын

Dodds brothers has all you need parts wise

@mikepriorii7839 6 ай бұрын

What did you use to clean the rectangular flute above the firebox? I bought a taylor 450 secondhand, but I only got a 4' rod with a 4" round plate on it that came with it and my stove is building up a lot of tar/creosote due to burning a green/dry wood mixture.

@codykingsworld 6 ай бұрын

When we got the house this was all set up. We have a metal scraper that's the shape of a rectangle about the size of the flue. Not too sure where to get one at. I have been trying to get another 4" round one for the back four pipes and can't find one. Mine is all bent up.

@mikeschroeder3238 Жыл бұрын

The heat rope is supposed to be riveted in. Duane @ Taylor Waterstoves has them. You will have to drill out the old rivets. I have the same unit, they provide the best heat. Hope you located the anode rod on the back. The people who had it before neglected the cleaning of the exhaust ports for sure. Nice video.

@codykingsworld Жыл бұрын

I talked to Duane and got some stuff off him last year. Nice guy. So there should be rivets there?

@mschroed99 Жыл бұрын

@@codykingsworld YES, if you look at your video you will see rhe stubs left when you peeled off the rope. The rope you removed wasn't that old, most likely the previous owner replaced it improperly.

@waynewilliams664 2 жыл бұрын

How tall is your stainless steel flue pipe. I am needing to add some but don't want to get too tall.

@codykingsworld 2 жыл бұрын

Looks like the pipe is 68 inches altogether. It's sticking out 45 inches above the stove.

@patrickcleburneuczjsxpmp9558 2 жыл бұрын

Did the chemicals in the water noticeably affect the grass or anything else where they ran out/soaked in?

@codykingsworld 2 жыл бұрын

Not at all the grass still looks fine. Im not to sure what all was in it before I drain it but the stuff I used is suppose to be environmentally friendly.

@patrickcleburneuczjsxpmp9558 2 жыл бұрын

@@codykingsworld Thanks!

@peteantos-ketcham3493 2 жыл бұрын

Any updates on how the Taylor is doing?

@codykingsworld 2 жыл бұрын

It's working great. Haven't had any issues this winter.

@GeeCeeAte Жыл бұрын

I got an old used one two years ago. It’s the best!! I live off grid so it’s BY FAR the best boiler for batteries/solar. My buddy’s Heatmore boiler uses more electricity than an electric heater. The Taylor just has a pump and a blower. I changed out the old antique technology AC squirrel cage blower and put in an in line pulse width modulated DC fan and now it uses 10 watts.

@christinejulius2119 8 ай бұрын

Hey there did you say you were going to leave the place in Missouri for contacting in comments, I can't see it, can you please share with me if you can again I appreciate it 🙏

@codykingsworld 8 ай бұрын

It's in the description

@codykingsworld 8 ай бұрын

fourstatewoodfurnaces.com/

@imysteryman Жыл бұрын

I have a T1000 and i save 1/2 the cost of the chemicals each year by pumping out 400 gallons of water into a tank then pumping it back in. Doesn’t your stove have a round plate in the back bottom where the anode rod lives and provides a place wash out the crap in the bottom.

@codykingsworld Жыл бұрын

Mine doesnt have that for some reason. When I drained it this past month it has a lot of crap from the anode rod on the bottom. Im thinking about just taking out the anode rod next time I drain because of all the crap it puts into the water. I hear it can clog up the pump. And I've had people tell me they never drain theres and just make sure that there chemical level is right with never using an anode rod.

@imysteryman Жыл бұрын

@@codykingsworld If the anode rod is eaten up it is because it has been protecting it from getting a leak from electrolysis I try to also keep the ashes out of the back bottom corners of the firebox because it sweats there and also can cause a leak. I have used mine for 17 years with no problems. I also have two ground rods connected to the metal of the stand

@codykingsworld Жыл бұрын

@@imysteryman thanks for the info. I need to get on that this weekend. Thats where most of my ashes are piling up.

@mattingold4054 2 жыл бұрын

Anode rod is in the back of stove.

@codykingsworld 2 жыл бұрын

Would you see it if you looked inside the drain hole? and does it just sit in the water?

@mattingold4054 2 жыл бұрын

@@codykingsworld no. Mine scattered in about half way up in the back of the stove.

@mattingold4054 2 жыл бұрын

@@codykingsworld check at the Bottom in the center of the water jacket clean out also. I had a 750 and it had two. One in the middle and one at the bottom!

@codykingsworld 2 жыл бұрын

@@mattingold4054 is it going to cause damage if I leave it sitting on the bottom?

@mattingold4054 2 жыл бұрын

@@codykingsworld shouldn’t but I can’t answer that for sure. You would have to ask Taylor. I was just letting you know where it should be located at.