Drawing Detailing in Creo Parametric with GD&T (Part-04) Significance of GD&T symbols

No video

Drawing Detailing in Creo Parametric with GD&T (Part-04) Significance of GD&T symbols

Рет қаралды 29,147

4 жыл бұрын

Detailing in Creo Parametric: A step-by-step approach to creating a drawing in Creo Parametric.
This tutorial will teach you how to add drawing views, centerlines, section views, dimensions, and GD&T. Significance of GD&T symbols available in the drawing.
GD&T for beginners | Step-by-step approach for GD&T for mechanical drawings
• GD&T for beginners | S...
Join this channel to get access to perks:
/ @cadxtraining
Playlist:
• Part Design in Creo Pa...
• Complex part design in...
• Sheet metal tutorials ...
• Surfacing in Creo Para...
• Assembly Design in Cre...
• Detailing the drawing ...
• Gear design in Creo Pa...
@CADxTraining #CADxTraining #CADx
/ @cadxtraining
/ cadxtraining
t.me/CADxTraining

Пікірлер: 43

@pawanraghav5178 Жыл бұрын

Came here to learn the basics of creo drawing but was left with close to expert knowledge in drawing and explanation of GD&T, which experts have also even taught. Thank you very much.

@shivjeetdyade5671 3 жыл бұрын

much informative and helpful video this is. in fact, these 4 videos of GD&T made it easy to understand basic concepts as well as some easy options while part modelling. thank you for this series of videos. i would like to watch more similar videos by you.

@arvindkumar-lq3mx 3 жыл бұрын

All the four parts is so informative and filled with enormous content. Please enlighten us like this, by posting more videos.

@CADxTraining 3 жыл бұрын

Thanks for the appreciation. Love your comment.

@avib3661 4 жыл бұрын

Best explanation of Gd&T I ever had..thanks a lot and waiting for more videos

@ManishKumar-sw8yk 4 жыл бұрын

You are Genius. Thank you for explanation. You are the best teacher.

@pavanbr3959 4 жыл бұрын

Your best in creo bro, I like your explanation methods, I seen many video in youtube but your is just awesome bro

@user-vh6jq3fz8p 5 ай бұрын

Tuyệt vời ❤

@dreamland7527 4 жыл бұрын

Very good details and explanation, Thank a lot.

@PavanKalyan-oh5if 3 жыл бұрын

good video, just cleared all my doubts....

@pauldiaz4273 3 жыл бұрын

Now can you apply what you just said to an Open setup on surface plate?!

@CADxTraining 3 жыл бұрын

If there is no material volume, there is no machining. If there is no machining, there is no gdnt.

@muniraj5395 Жыл бұрын

Can someone tell me the short cut key for switch on / off the datums

@shivbhagwan111 2 жыл бұрын

Sir, Please share your all the knowledge of software which is use full for design engineer.

@rajaganeshb.e628 Жыл бұрын

Dear Sir is there any possible way to change display fraction format? For example, dimension 1.5inch, in fraction it displayed 1-1/2 i need as 1 1/2.

@CADxTraining Жыл бұрын

Yes you can get that result.

@rajaganeshb.e628 Жыл бұрын

@@CADxTraining how

@CADxTraining Жыл бұрын

Set "dim_fraction_ format" to aise

@kbnchannel1991 4 жыл бұрын

Your explanation way was best and ever best sir in drawings how can I understand the dimensions are in inches or mm

@CADxTraining 4 жыл бұрын

That doesn't matter for most of the people, everybody has their own standard template done in either inches or matric. Generally if the dimensions are having two decimal place then it will be metric and if it is 3 decimal place It will be inches.

@monty9164 4 жыл бұрын

It also depend on standard fallow by company ASME(first angel projection) or ISO(third angle of projection). ASME use inche and ISO use mm as unit. 😊😊

@kbnchannel1991 4 жыл бұрын

@@CADxTraining Thanq sir 😍

@kbnchannel1991 4 жыл бұрын

@@monty9164 Thanq 😍

@sushantpawar3689 2 жыл бұрын

Sane sir

@dilipka6528 3 жыл бұрын

Hi CADX,, have a query - both B and C datums are subjected to centrline only ??

@CADxTraining 3 жыл бұрын

Actually we have two different center line there for two diffrent feature.

@dilipka6528 3 жыл бұрын

@@CADxTraining agree,, but both centrelines are collinier right ?? There is no offset

@CADxTraining 3 жыл бұрын

As a beginner it is difficult to understand but I will try to to explain you. There are two different size bore which cannot be manufacture at the same time. If there is a relation between both the bore then you need to control both the centre axis using gd&t with each other.

@dilipka6528 3 жыл бұрын

@@CADxTraining Got it thanks.. There are two different dia of bores and practically each having a different center lines. Way of explanation is good,, keep it up 👍👍

@ObelixCMM 3 жыл бұрын

First of all those are not Datums, they are Datum Features. You don't pick primary Datum Feature by how are you going to measure part, it should be picked by parts application in use. Primary Datum can not be "tilted" as it is PRIMARY and everything else relates to it. Runout controls surface variation from nominal not axial.

@spvids46 4 жыл бұрын

very useful sir. how to create custom symbols in creo?

@CADxTraining 4 жыл бұрын

there are different ways to do this. Which type of symbol are you looking for?

@spvids46 4 жыл бұрын

@@CADxTraining dowel sumbol, grinding, turning, milling symbols

@CADxTraining 4 жыл бұрын

kzfaq.info/get/bejne/mpqAmtJhvNqYdn0.html This will give you some idea to explore it.

@thanimaikadhalan4198 2 жыл бұрын

What is zero plane , how to show datum plane in drawing like as D0 ,D1,D2......... Please reply me

@CADxTraining 2 жыл бұрын

Which standard do you follow? This kind of notation is not allowed in any standard.

@thanimaikadhalan4198 2 жыл бұрын

@@CADxTraining sir , I gone one company for interview , they ask me what is zero plane and give model sheet for drawing detailing ,they mentioned datum planes such as D0, D1,D2 etc... And they mentioned some places in diagram A,B ,C ,D ,E ,F .... reply me sir

@CADxTraining 2 жыл бұрын

Search in google for Datum target in parametric. You will get the answer.

@niharika9524 3 жыл бұрын

Helpful vedio

@sushantpawar3689 2 жыл бұрын

Sane sir ka

@agankachu09 3 жыл бұрын

Firstly, there is no word in English such as 'parallely'. You just made it up from thin air. Please use 'in parallel' the next time. Secondly, your part Datums are incorrect sequentially. How can you refer Datum-B to Datum-A&C? Sequentially speaking, B is born /made before C!