Drawing Detailing in Creo Parametric with GD&T (Part-02) Drawing Views and Dimensions

Рет қаралды 141,679

4 жыл бұрын

Detailing in Creo Parametric: A step-by-step approach to creating a drawing in Creo Parametric.
This tutorial will teach you how to add drawing views, centerlines, section views, dimensions, and GD&T. Let's add Drawing Views and Dimensions.
Drawing Format & Drawing Template with Title Block in Creo Parametric:
• Drawing Format & Drawi...
Join this channel to get access to perks:
/ @cadxtraining
Playlist:
• Part Design in Creo Pa...
• Complex part design in...
• Sheet metal Design in ...
• Surfacing in Creo Para...
• Plastic Design in Creo...
• Assembly Design in Cre...
• Detailing the drawing ...
• Gear design in Creo Pa...
@CADxTraining #CADxTraining #CADx
/ @cadxtraining
/ cadxtraining
t.me/CADxTrainingining/
t.me/CADxTraining

Пікірлер: 94

@anvilama Жыл бұрын

I am very thankful to you. I believe you are one of the best teachers in Creo Parametric.

@CADxTraining Жыл бұрын

Thankyou and Yes I also take separate training classes for Creo parametric.

@anvilama Жыл бұрын

@@CADxTraining Could you please give me a detail about your course? I will be happy to learn from you.

@CADxTraining Жыл бұрын

Send me a email to email2cadx@gmail.com And I will reply to you asap.

@CADxTraining Жыл бұрын

Send me a email to email2cadx@gmail.com And I will reply to you asap.

@jamiemills954 3 жыл бұрын

Very helpful video set. Thank you for putting this together.

@kirans6992 4 жыл бұрын

One of best video... Keep sharing knowledge sr👏👏

@NorbiGaming 2 жыл бұрын

This is extremely useful, thanks.

@akshayjadhav2269 2 жыл бұрын

Hello sir, Thanks so much for all the helpful videos. Sir, Can I get the default setting .confg file and .detail file which is created by you?

@spvids46 4 жыл бұрын

Thank you a lot sir. You are doing really great. Thank you thank you.

@901help2 2 жыл бұрын

Very useful, thank you!

@printlife9016 Жыл бұрын

Hi, I made an engineering drawing based on a simple rectangle block model. I had four Rounds added to the four corners. One question, how did Creo count the quantity of Round? I want it to display, say 4 x R5 in the drawing, but it only showed R5?

@kbnchannel1991 4 жыл бұрын

Sir how to make drawing view, want place general view it directly take solid view and one more doubt will it able to rotate general view as per our direction

@sitaramtudu2095 Жыл бұрын

I am very thankful to you, this is very useful to me, but I have some doubt 1. When I took limit in Tolerance, edit option (15:55) above superscript option is not active in my creo, is there any dimension or Tolerance setting, please tell me, If you share the all setting then i will be very help full for me.

@umeshgaikwad2789 Жыл бұрын

Thank you very much sir This video was very helpfull I have one doubt about No combined states while taking first general view. So please help us.

@dsohal 2 жыл бұрын

how to show measuring units on both dimensions ( ex: 254.0 mm [10.0 in] )

@SaitekiCo Жыл бұрын

If I pass my upcoming CAD-exam, it will only be because of your videos. If I fail however, it will only be because I didn't find your videos sooner.

@newlearningonbaking4327 3 жыл бұрын

sir if section view in drawing showing only half portion then whta to do....under sectioned area i have selected full then to its showing half

@dharmasagarpatil8485 2 жыл бұрын

Thank you Sir!

@emreerdogan4360 3 жыл бұрын

are you using creo as a licensed software?

@shivamohan632 3 жыл бұрын

super explanation please make more videos on creo i am new to creo

@shivamohan632 3 жыл бұрын

Thank u sir, please do more videos for detaling

@baluraj7301 3 жыл бұрын

Great sir. Simply crystal clear explanation

@rajeshsinghjadham9899 3 жыл бұрын

Thanks sirji You are great sir

@gasserjoshua7448 11 ай бұрын

9:36 maybe it’s because I am using a student version of CREO but “Dimension” is not an option for me. Or maybe the name changed in version 8 of CREO? Thanks as always for your videos

@babluvashisth8344 3 жыл бұрын

How I am make details view around circle settings When I am making details view its come with leader so how I am change this settings

@Just_For_Fun-JFF 2 жыл бұрын

Really helpfull

@ketandeshpande6149 3 жыл бұрын

After following same procedure as yours I'm not getting pitch circle diameter in drg. View.. And when I go to drg. As I place the view I'm getting 3d solid view everytime I need to go to view display and change it to no hidden view how to tackle this?

@CADxTraining 3 жыл бұрын

This is controlled by config.pro. I will tell you the complete procedure soon.

@ndot9238 3 жыл бұрын

Im having the same issues. Did you find a solution

@arnabpaul1804 2 жыл бұрын

Thank you Sir

@suhanyt730 Жыл бұрын

Thank you explain

@avtarsinghpunjabi2942 3 жыл бұрын

How can you change line style of pcd to centerline which config file is there for the same.

@CADxTraining 3 жыл бұрын

It happens automatically. Watch this to understand it better. kzfaq.info/get/bejne/p6l4msSS0tzKe6M.html

@omkarsutar578 2 жыл бұрын

14:40 after click on dimensions, tolerance tap didn't open to change nominal to basic. What do I do?

@omkarsutar578 2 жыл бұрын

tol_display change to "yes" from detail option 👍🏻

@alaganarivu8698 2 жыл бұрын

How do you do this

@meharsamba Жыл бұрын

Holy shit. Thats good

@jayraghav4176 2 жыл бұрын

Hi , sir can you please share notepad files for creating seting

@logeshlogesh375 4 жыл бұрын

Brother is there any other way for give detail view in smooth curve

@CADxTraining 4 жыл бұрын

Creo parametric doesn't have any direct way to do this. This is the only way we do.

@crystalcad2485 4 жыл бұрын

Sir how to show surface finish symbol with N symbol..? Like N1, N2

@CADxTraining 4 жыл бұрын

You can create the custom symbol

@ashutosh8657 8 ай бұрын

sir revolve command me mera dimension centre line se reference le raha hai. jis wajah se muze diameter ka half value dalna padta hai, muze full diameter me lane ke vaste kya karna hoga

@CADxTraining 8 ай бұрын

Just place a datum centre line instead of the sketch centre line. You will get the diameter dimension.

@shibusukumaran1141 11 ай бұрын

critical dimensions ?

@viralagricultureworks1710 4 жыл бұрын

Sir, how to add A in between two Arrow of circle in detail view symbol.

@CADxTraining 4 жыл бұрын

You get this option inside the detail view. Select a semi option inside the detail view.

@viralagricultureworks1710 4 жыл бұрын

Thanks sir

@itsatharv 3 жыл бұрын

Name of part sir?

@joydeeppaul6252 3 ай бұрын

I need one video to understand how you prepared the detail file.

@CADxTraining 2 ай бұрын

Okay I will do that

@krystalvang9659 Жыл бұрын

good

@basavaganesh9088 3 жыл бұрын

please make more videos regarding GD&T

@CADxTraining 3 жыл бұрын

Have you seen this? kzfaq.info/get/bejne/Y5mkgZp826q5moU.html

@shivamohan632 3 жыл бұрын

Sir please make some videos for GD&T

@CADxTraining 3 жыл бұрын

Must watch. kzfaq.info/get/bejne/Y5mkgZp826q5moU.html

@RAHULSINGH-ci9zr 11 ай бұрын

Can i have the detail file

@abhiramthokala8672 3 жыл бұрын

Sir, i can able see dimension tab on menu tab will you me sir in creo 3.0

@CADxTraining 3 жыл бұрын

Your question is not clear.

@abhiramthokala8672 3 жыл бұрын

@@CADxTraining In Creo 3.0 can get the dimension tap on menu after selecting 60° dimension and . I can see any dimension also

@CADxTraining 3 жыл бұрын

Some of the things doesn't work in creo 3.

@harikumark6371 4 жыл бұрын

Can you please share detail file with us? So that it will get better finish to our drawings.

@CADxTraining 4 жыл бұрын

You can take snapshot of the drawing given in the video in HD resolution.

@harikumark6371 4 жыл бұрын

Thanks for suggesting 😊

@kbnchannel1991 4 жыл бұрын

Sir how to make solid view to drawing view color remaince same.

@CADxTraining 4 жыл бұрын

That can be easily done using view properties in creo parametric

@kbnchannel1991 4 жыл бұрын

@@CADxTraining Thanq sir

@kbnchannel1991 4 жыл бұрын

@@CADxTraining one more thing you making hole numbers and degree with combine and dimension in brocket and limit tolerance and symmetric tolerance not possible in credit 3.0 how can I sir please

@kbnchannel1991 4 жыл бұрын

This is not possible in creo 3.0 please tell me other way

@CADxTraining 4 жыл бұрын

In creo 3 go to the drawing properties and activate tol_display before adding the tolerance to the drawing.

@lekhank6106 3 жыл бұрын

sir can i get the drawings for practice work

@CADxTraining 3 жыл бұрын

Why can't you take a snapshot from the video

@lekhank6106 3 жыл бұрын

@@CADxTraining already took that...ty

@omkarpatil4157 Жыл бұрын

how to create section line

@CADxTraining Жыл бұрын

Use "add section line" option

@robertanto Жыл бұрын

how to model the pressure vessel nozzle r.f pad in creo

@CADxTraining Жыл бұрын

Share the reference

@robertanto Жыл бұрын

@@CADxTraining provide your WhatsApp or mail I’d

@robertanto Жыл бұрын

@@CADxTraining I can’t attach my drawing in message so provide ur WhatsApp or mail I’d

@CADxTraining Жыл бұрын

email2cadx@gmail.com

@robertanto Жыл бұрын

@@CADxTraining mail sent

@jamilafridi18 Жыл бұрын

Which cad software r u using man😃? It looks very weird. Try to use solidworks 2022-2023

@CADxTraining Жыл бұрын

It is Creo parametric, much more advanced than solidworks.

@prashantsanghvi9087 2 жыл бұрын

PCD Axis not showing on Model

@CADxTraining 2 жыл бұрын

You can watch this. kzfaq.info/get/bejne/p6l4msSS0tzKe6M.html

@prashantsanghvi9087 2 жыл бұрын

@@CADxTraining Thank you sir, i have got it

@prashantsanghvi9087 2 жыл бұрын

i have another problem of Limit set in creo 3.0 in your video 45.4 and 45.6

@koushikcell6436 3 жыл бұрын

getlost ads

@wrussum1 Жыл бұрын

I'm going to abandon your channel. You lost me when you changed the scale to 1.5. You did not specify to double click and it took me a very long time to figure out why I didn't get the dialog box. I'm a SolidWorks user trying to come up to speed on Creo for my livelihood (a new job).