Crawler Canyon This or That: Axial SCX 10 Pro vs. Vanquish VRD Carbon

No video

Crawler Canyon This or That: Axial SCX 10 Pro vs. Vanquish VRD Carbon

Рет қаралды 3,808

Күн бұрын

Battle!
P.S. Don't buy a Stance.
Get a Crawler Canyon tee! www.cafepress....
Some links:
SCX 10 Pro amzn.to/4ervYQ8 (Amazon)
SCX 10 Pro alnk.to/eZGILx8 (Amain)
Terrible amzn.to/4bggKur
Stance alnk.to/g3bkdTX
Also terrible alnk.to/9Ie2UxF
RS400 alnk.to/aeYghwh
HW Fusion SE 1200 alnk.to/fayGQih
Injora Comp Pins amzn.to/3XCeSZV
Injora silicone amzn.to/4cxVm4X
IG: crawlercanyon
Amazon list: www.amazon.com...
The Tire Test Protocol Spreadsheet:
docs.google.co...

Пікірлер: 82

@FaithSaraG Ай бұрын

Yeah, no wrong answers between these two. Both very capable.

@jeffreyl4924 Ай бұрын

Happy 4th of July my American friends. Love from Canada!

@NewLifeRC989 Ай бұрын

Love my VRD. Put the Brazin Frontline chassis on it with Holmes electronics, stubby conversion, etc, and it unlocked even greater potential. Genuinely enjoy the 10 Pro and VRD comparisons here. Great work man. 🙏🏻🙏🏻

@pallepetersen7641 Ай бұрын

Great test.👍 Love them both. Pros and cons on portal and straight. They are like brothers compete. ❤💪

@jamiejck Ай бұрын

So... the conclusion is you gotta have both👍😆

@Ian-ku4qo Ай бұрын

Perhaps a re-run on sub-par tyres instead of ‘cheat-mode’ pins would help amplify differences?

@CrawlerCanyon Ай бұрын

Honestly, I thought the VRD did better on Tusks than it did on pins.

@davidconaway2830 Ай бұрын

I have both and my results are very similar to your results. Well done and thank you for this comparison. Happy Fourth!

@rccrawlingaddict207 Ай бұрын

Put the knuckle weights on the front of the PRO to better match the V-nix and try it again, but this time try following the same lines even you you have to mark them? Throttle seems to be more happy on the PRO as well. Great entertainment though, I'll give you that!!!

@bouncingnoise Ай бұрын

But then you’d have to lock the Pro in 40% OD as well😊

@CrawlerCanyon Ай бұрын

Pro has much less gear reduction, so it's faster on a 1200 than a VRD on an 1800. I honestly think that same problem will rear it's head with straight-axled VRD.

@rccrawlingaddict207 Ай бұрын

@@bouncingnoise As long as there is more weight in the front, that would be ok. I like to use the forty for entering a climb or just hooking to pull up!

@RuudK. Ай бұрын

It's like watching the Discovery channel for RC's. Love your work/videos. Keep 'em coming 😊

@Driver86421 Ай бұрын

The showdown we've been waiting for and as fair a comparison as one could wish. Definite pros and cons for each. Still leaning toward the VRD with straight axles, but now I need to see how the tweaks and upgrades pan out. Good stuff!

@themountain59 Ай бұрын

Nice comparison...they both have there place...I lean towards the VRD with other shocks and shock bands .Lets wait for the builders kit which is suppose to be significant cheaper than the axial.

@CrawlerCanyon Ай бұрын

My guess is the Builder's Kit will essentially be a C-channeled, disassembled Stance, so sintered gears throughout-- but if the pricetag is appropriately ~$250 then that's absolutely fine.

@CodySnell_87 28 күн бұрын

I feel like the 10 pro with a light weight trans t case combo would be a game changer. That heavy unit is too complex just do around 25/30 percent od all the time and call it a day imo.

@Camocrawler2868 Ай бұрын

Happy 4th of July everyone! Great video Mr C. I seen on vanquish live stream they gonna be releasing a vrd strait axle kit and a vs4-10 builders kit, that's cool. You could play whack-a-mole with that gopher lol.

@CrawlerCanyon Ай бұрын

Isn't it delightful to see Vanquish releasing a handful of new kits, when they haven't even finished the breath where they basically said "the market wants RTRs"? I call shenanigans.

@Camocrawler2868 Ай бұрын

I see your point they are trying to shove the stance down your throat

@ShoddyRC Ай бұрын

@@CrawlerCanyon $289 for the VRD builders kit sounds pretty good to me! I’d bet these new kits have been in the works for a year or more. Awesome video, I’ve been looking forward to your comparison of these 2!

@charleshurley8927 Ай бұрын

epic battle

@markcole6475 Ай бұрын

I have the Carbon and Pro….very good electronics in both…..both perform great. I opted to get the portal conversion axles for the Pro…initially I like the portals because it pretty much eliminated the torque twist.. Preliminary testing hasn’t proved them unworthy of the swap.. Now I see vanquish has come out with a VRD straight axle kit…oh boy …decisions decisions 😅

@LumpkinMumfins1 Ай бұрын

From Mighty Car Mods: the gopher went “Full disrespected nose” on ya hahaha

@brianmorrison2846 Ай бұрын

Yes

@dezfan Ай бұрын

Great demonstration of the pros and cons, abilities and shortcomings of these top contenders. I’m a VRD owner and out on the rocks today (4th) my friend (also VRD) and I both commented on the VRD’s front end float. I think a little additional wheelbase would greatly benefit the VRD.

@lastcreations8845 Ай бұрын

just tuning the front unloading would greatly help or near eliminate it. stock is listed at 322mm long as heck already LOL

@dezfan Ай бұрын

@@lastcreations8845 I’m not near my rig at the moment. But if 322 is the advertised wb, that just under 12 1/2 inches. I run several rigs at 13.

@butch6819 Ай бұрын

You should make a VRD carbon on straight axles to see if it’s the ultimate combination

@brianmorrison2846 Ай бұрын

I agree the VRD feels so light I thought it was. The PRO feels like low weight rubbing rocks if you don't drive it different.

@OGRadGrow Ай бұрын

Awesome comparison. I'm a VRD fan myself 👍🏾🔥

@henryoak2001 Ай бұрын

Great comparison! I wonder how the VRD would do with the stubby kit, imo it’s a lateral move unless you have a brass servo and even then I’m not sure

@simonkubacki9823 Ай бұрын

Man I wish I saw your videos before I bought my stance, would have got for the kit. With all the mods I did to it it handles great now. If vanquish comes out with a straight axel VRD I’d get that. Thanks for the videos, happy Independence Day

@andrewhead4365 Ай бұрын

They just announced it and should be released after TOF. I would still buy the carbon kit and throw some straight axles on it and have an extra set of portals. The one they are releasing is a kit like the carbon but with all the crappy sintered one piece ring and pinion. Also the trans is a standard VFD in the new kit. You would spend almost $300 to upgrade to carbon spec trans and machined ring and pinion

@andrewhead4365 Ай бұрын

Basically it’s a Stance kit with straight axles

@simonkubacki9823 Ай бұрын

@@andrewhead4365 sorry what’s TOF?

@andrewhead4365 Ай бұрын

@@simonkubacki9823 trucks of freedom. It’s a $650 gamble box with at least $899 of value in it. You don’t know what you are going to get but guaranteed to be worth at least $899. You get an RTR or a kit plus extras. Maybe wheels, aluminum axles housings, etc

@simonkubacki9823 Ай бұрын

@@andrewhead4365 neat, at the retail price of the straight axel kit I could also get a Tamiya bbx. This will be an Xmas purchase anyway, I just bought some blingy carbon hoops for my mountain bike, I have to pay those off first

@dennisanstadt1039 Ай бұрын

My Carbon for me was definitely more capable than my Pro. I sold the pro a few weeks ago had it since first released.

@crawlercityrc Ай бұрын

morning gents, 😊

@tjpighin Ай бұрын

18:24 that was drivers difference. You were rammy with vrd and slower and smooth with pro and you took different lines with each loading the tires differently off the start

@CrawlerCanyon Ай бұрын

I make every effort to put them on the same line, but if the VRD tries to hang out as low on the ledge as the 10 Pro, that highside front tire is gonna unload and the rig is taking a tumble. A straight axle better on the sidehill than a portal? GASP! Who would have guessed? No one rig is the best at everything. But hey, I've only driven a hundred different rigs across that line, hundreds upon hundreds of times.

@tjpighin Ай бұрын

@CrawlerCanyon yaaaa, it's soooooo hard to get things exact and do comparisons exact for sure. Chalk lines or markers and same throttle is key but even then, rear ends will do different things sometimes and never perfect scenario. Still great comparison video. I have always wondered about these two head to head with as close to same builds as possible

@branonjohnson8618 13 күн бұрын

Says a whole lot of nothing

@PleasureAfterWorkRcCrawlers Ай бұрын

Put the Class1 Megalythics on the VRD. I prefer class1 tires on portals. Would love to see your thoughts about it on video. Btw., the Stance has 23% Overdrive...big thanks for your vids 👍

@HVT03 Ай бұрын

10 PRO with a 2low gearbox could be something really interesting to see... IMO, Vanquish does more "unique" things. The PRO axles are the best part of the rig (and they arent even THAT good), and the rest of the parts can be replaced with anything else. Vanquish axles and gearboxes cant be replaced, you wont even think about doing so Are the PRO axles that different to just some AR44s or AR45s? I know the PRO ones are way better designed than the others (I watched all the build-a-long), but are they good enough to make you want to buy a PRO instead of building something custom with different Axial axles like AR44s or AR45s, for half the price? I guess im a "build whatever you need" guy

@CrawlerCanyon Ай бұрын

Thanks to AliExpress (and Amazon, here in the states) you can build an entire set of 10 Pro axles without ever touching an Axial part, grab a set of carbon rails for $20, and build yourself a "Pro" for probably less than the cost of a Pro kit. The same cannot be said of the VRD Carbon.

@EddieDesigned Ай бұрын

Those gophers are why cats like to adopt you...

@jimbocreationsbu8203 Ай бұрын

very close matchup, but the VRD gives u more for the buck$, on the other hand, as u mentioned the after-market for the pro is way more available and cheap - not a clear choice at all given the terrain

@AnyAssumptionBanter Ай бұрын

The answer now is kits. Need more kits. So much goes to waste in an rtr after seeing this.

@billtruett8593 Ай бұрын

Great video.. I can tell it had to have been fun to do other than the Heat🥵… now we need to know… ok we now know what $429 gets us. Now - builders kit vs base camp ? I don’t know sounds good though.

@lastcreations8845 Ай бұрын

I know test was "box stock" but vrd needs tuning, front unloads bad. anti squat, shorter spring or shock. With tuning the short falls it would quickly out do the 10pro where it was struggling or behind. On 10pro still like the idea of a featherweight, unloading that 1lb trans first thing lol. great test.

@slothsquatch5023 Ай бұрын

The gopher just wanted early access to the video...so no one can claim 1st! in the comments section.

@brianmassey7563 Ай бұрын

i'd be cool to see the VRD with the stubby and BTA vs the PRO. I've been asking that same question about RC shocks...is it rocket science to make a shock that doesn't leak? The most complicated part of an RC? You need a new Geeg....outdoor cats are awesome...grew up with lots of them. Great episode!

@CrawlerCanyon Ай бұрын

I can get you halfway there-- I just put a stubby in the ZRD Mullet (because why not)

@CrawlerCanyon Ай бұрын

I can get you halfway there-- I just put a stubby in the ZRD Mullet (because why not)

@sprather84 Ай бұрын

Happy 4th Mr. C

@crawlercityrc Ай бұрын

just noticed Vanquish have there builders kits on the website, vrd builders and 4-10 builders,

@JC-Nor-Cal Ай бұрын

There showing them but are not available until after they distribute all of the TOF sales. Trucks of freedom.

@nicholasstephey8475 Ай бұрын

Ooooyeeee. Let’s go

@neildaniels5443 Ай бұрын

Wagwan Canyonaeros 👊

@EddieDesigned Ай бұрын

Swap bodies, that'll make it really fun... 😉

@KTMKID450 Ай бұрын

Luv ya Mr. C

@frankiemabry1726 Ай бұрын

my scx 10 pro shocks dont leak an i have too sets of them. an have had great luck

@The_Craw1space Ай бұрын

Are there such things as chinesium parts for f10 axles or are parts Vanquish exclusive?

@CrawlerCanyon Ай бұрын

You can get full clones from AE now, and we now have $30 portal weights as well. It's definitely helping the usual Vanquish-level investment into a rig.

@The_Craw1space Ай бұрын

@@CrawlerCanyon Good deal. Thanks for the insight!

@Stinkyj6443 Ай бұрын

Ok... i may be wrong...but looks like the 24% od is the answer

@themountain59 Ай бұрын

...always was/is 😉😁

@bouncingnoise Ай бұрын

Is it just me or did the VRD work better on Brorb / Tusks?

@CrawlerCanyon Ай бұрын

It's not just you.

@JC-Nor-Cal Ай бұрын

I personally like the one on the pins better... Calm down. I know.

@mattydeanwtf Ай бұрын

The only question left is…. Which one is the ford and which one is the Chevy lol 😂

@CrawlerCanyon Ай бұрын

I've never owned an American car-- but a good half of the cars I've ever owned were built here (my Subaru was built in Indiana.). So I don't have a dog in the Ford vs. Chevy fight. I just know that must have changed, because the neighbor was a die-hard Chevy man, nothing but bowties since his first car in high school, and now he drives a Ford F150. Chevy done done him wrong somehow.

@JC-Nor-Cal Ай бұрын

Looks like the pro got almost double the attempts and equal amount of completion's overall. I challenge all the canyonareos to watch the vid a second time and grab a pad of paper and pen and keep track of what you feel is the number of attempts and number of completion's per contestant. See what you come up with in order to make the comparison. If you care to share your findings. Please do so...