This crew refurbed our patios recently - absolute machines and complete pros 💪🏻 🔥

Looks amazing! Great work Sperrin and Skill builder. Lovely products ❤️

That looks absolutely class, really finishes off what looks to be a lovely house. Good job highlighting some quality tradesmen there guys.

What a really smart job. I'm a groundwork and this is unbelievable the speed and quality I've never seen ever. Great job

Brilliant product and even more brilliant contractors 💪🏻👌🏻

What wonderful guys and a excellent finish! Well done!

What a fantastic looking driveway. Certainly gives the wow factor!!

what a brilliant crew of lads well done on that fantastic job , great vid sb

Superb workmanship . Stunning job .

Looks like a nice job, Roger! Thank you for yet another interesting video. How are the levels set? We use rotary lasers, also for slopes, together with steel tubes and a plank, to get flat surfaces. This looks like it is made freehand with a steel tube, which obviously can be done if you have experience. But I imagine that you still need some fixed points for heights? We use rock dust to fill in the gaps and I think it is better the larger grains that can get down between the blocks to lock them in place. It is often difficult to get dried rock dust so you can also rinse it down carefully with a water hose after spreading it with a broom. In regards to getting straight lines, different slopes on a paved surface makes the distances differ and you will end up with a curved lines/joints. Be careful to compact the laid blocks, since they might move both sideways and down if there are not fixed edges. The blocks usually even out after time if they differ slightly due to grains of rock under them. You can use polyuretan stone glue in between blocks in sensitive positions where you might expect movement.

Stunning when done properly 👏

Brilliant job. Keep up the good work!... 🥂🥂🥂

It's a delight to watch real tradesmen at work - Many Thanks Roger

Looks great!!

Top job that, done many driveways over the years but I've nearly had as many back ops aswell, really miss it but it's a young mans game and I'm.moving on to other ventures . Great video well done mate

Excellent work a pleasure to watch x

Great job thanks for sharing 👍

Great job, I’m going to give this a try on my own drive. Thanks for the tips 👍

Tobermores paving = different gravy! Absolutely class!

Amazing work lads that looks class ......

cracking job

Looks great! 😊

Amazing jobs true working guys

Brilliant Work lads. Well done.

Thanks for encouraging people to reduce flooding.

Great job. If you do get a shower of rain then a leaf blower to dry things off and move the sand around is a cunning trick. Good to see you lending a hand.

That really is lovely .

Great work!

Great looking job done there by those lads from Sperrin, they certainly can move fast you didn't even have to speed that video up much. Roger you should have gone down to Donegal and seen if the homeowners have made any progress since been featured in the New Homes Nightmares video a while back.

Great job boys.

Really nice!

Roger can you do something on solar panels, seems right with the rising costs, would be interesting for price comparisons etc value for money/return

My back hurts just watching those guys.

Very satisfying 😊

👍👍👍 great job

True craftsmen.

Very nice 👍

09:49 that pallet barrow would have saved my back years ago!

Can't beat Irish workmanship!

Greta advertisement for that form laying those pavers. What a bunch of weapons!

Great!!!!

I don't think I saw a slot/channel drain going in at the front door threshold. I may be wrong though. I would always use some form of drainage at level thresholds to protect from the wind driving water under the door. Cracking job!

Looks quite good how long would you expect them to last with cars driving/turning over them?

Roger - what depth do you have to dig up to for vehicle and foot traffic before the type 1 mot is put down?

🐕🐕 Rodgers New Best Mate 🐶🤣👍

The good Irish do not mess around and they good a superb job!

Hose and broom in sand and cement at 3:1 works heaps better than the sand products and no weeds. This is how we do it in Australia 🇦🇺 nice work.

Doing that job would kill my back. Does look nice though. 👍

I've been block paving for 18 years you have to bang all those blocks In to line every four lines if your using a 3 size mix

0:36 even the house is stunned

Would they do jobs in South of Ireland? Brilliant work they did there

Would you ever do a stamped concrete version? Or does that require more effort for the average DIYer?

You can't beat a Shannon driveway.

Fair job Boyz my back hurts looking at ye laying 🙈🤣 I'll stick t d chippy work 😂

They made it look easy, the mark of a true professional outfit. These lot will be employed til retirement

one thing you want to check with your water company is that they're not charging you for surface water if it's not going in the drain, generally they do charge for this you have to make it apparent to them you do not have any surface water going into your drains.

I wish we could

It's crusher run, not 'crush and run ' and not scalpings either, which is broken up tarmac.

beautiful work, Gents!! love it. Admiration from Lake Tahoe, Nevada

Geo textile is not a weed barrier it is a separation membrane to prevent the sub base from sinking into the sub grade so increasing stability. Weeds come from the top, not underneath. No normal weed, bar knotweed or the like can penetrate a proper base. I am surprised at the lack of water suppression in the saw. I’m surprised - Roger is generally so knowledgeable.

Not better to use 2-6mm stone instead of sand?

2:41 its crusher run

Next time your over should pop over to Donegal get a look at the mica crisis … put more light on the subject n maybe explain it better from a building point of view .. dare say there’ll be a good Rodger rant in there for you.

Had mine done a few months back. When it rains some blocks remain wet longer than others ..... Does anyone know why this is happening and if the problem will fix itself i.e fully dry themselves out in the summer months ?

top notch job.. I bet its expensive ! but you get what you pay for

Hi-vis straight from being pressed at the dry cleaners.

“Crusher run” not “crush and run” (which isn’t the same as MOT 1)

Roger pigment is added to the concrete mixture based on a percentage of the weight of cement used . 10 percent being the maximum amount of pigment recommend. how does limiting the pigmented concrete to the first 4 to 10 millimeters of the brick enhance the colour of the concrete .

Does make me laugh when the cameras come out all the high viz is on I bet they don’t where them when the cameras not on but good job

The geotextile is for stability, it keeps the whole driveway together like a carpet would your toy blocks (the whole installation becomes one piece). The geotextile fabric is much stronger than your weed protection.

What are you doing next weekend........

Crush and run 😂🤣🤣🤣

I could swear that I've seen this video before...

And owner would have received a bill for £3k to £6k for that job 🥵

Great Video Roger, one gripe as an Irish person, Tober is pronounced Tubber, as Tober is from the Irish language Gaeilge, meaning a well. And i believe Tobermore is pronouced Tubbermore. Someone from Tobermore can correct me. Thought you might like to know. Rock on skeelbeelder 👍

How to lay paving like a pro while unashamedly plugging one particular supplier

Didn't mention most important thing-depth of mot.

This beats the 2clowns 🤡 that I got

Sorry Roger, as informative as your videos are, every few minutes an advert break of between 30 seconds and a minute, that you cannot skip. I will look for other channels until this is sorted. F