Now it's stuck in my head again 😂 it's been a rough week 🤣

@@nbrworks when I think of that I see little baby yellow hens and it doesnt bother me so much

😂

Thanks TR!

Thanks! Glad you liked it!

My taper does not have the correct angle ground.

Hi. My spindle taper does not have the right angle, so I can't use a dead center in the spindle and the faceplate. Thanks

Thanks Paul, that's appreciated. Glad they make you feel that way! Cheers!

Hi, I don't have a particular good reason other than convenience. The 6 jaw was already on the lathe, so I used it. At 4:06 the part was flipped and I machined the register for the spring, that does't need to be concentric to the rest of the part (there's a gap to the outer piece), so I didn't even try to indicate it, if I remember well. Then I indicated it to machine the outer piece at 13:41 (just for the finishing pass, to get the run out closer to the steel body). I had a couple of tenths of runout (0.0001/0.0003"), which is as accurate as I can probably get with the 5C. So I went ahead and didn't touch it until I finished all operations. In the future, as long as the center is recut in place, there's no need to worry with the runout in the main body, so I can use the 3 jaw, the 6 jaw or the 5C (whatever is already on the lathe). I hope this makes sense. Thanks

@@nbrworks Great - thanks, yes, all very clear !

Thanks! Glad you liked it!

Thanks! Nice to see you back again 😀

Hi! No, it needs to be reground (with a grinding stone). I'll have to make a tool post grinder for that, until then I'll use this tool shown in the video. My lathe's spindle taper doesn't the correct angle ground from the factory - hence the 'can't trust' part.

Hi Chris. That's a good question, thank you for asking. Yes, I have designed in Fusion 360 a complete toolpost grinder, including a second (longer) spindle for the morse taper job (because I don't think I can buy a grinder with an adequate size for my lathe). I ordered the stock to start with it, but then stuff got it in the way and I lost momentum - I haven't started yet, but I might revisit that in the next months. This tool in the video took some hours to make, that's true, but worked well and I can continue to use it until I got the taper fixed. Thanks!

@@nbrworks Thank you for the update. I just knew you had to have something on the fire to fix it.

Hi Jarry. I can't work in a dirty environment, I just can't ☺️ I often spend time cleaning and organizing. The good part is that, most times, I can quickly find stuff I put away years ago - it's the benefit of having an organization (and mental) system. Merci pour ton commantaire et bienvenue sur la chaîne!

@@nbrworks Hello, I appreciate so much this style of philosophy, My machines are always super clean as my finger, the Dyson eat every thing at any moment fixed on the machines. Clean is precision as in my job of racing fine motor preparation, a part of dirt and you forget. In my little workshop, no grinding, I make it outside. At 72 years old my passion is my workshop. Go on to enjoy us with your talent. Bien cordialement l’artiste👍

@@jarrychicanaux5821 It's such a previlege having people like you on the channel. Truly appreciated. When you say a small particle can ruin an engine build, I know what you're saying. A little bit of grinding dust down the bores... and the engine's done. I think you'll like my next video (currently editing it) 🙂 I don't know if you had a look at my website, which is now a little bit outdated, but I have documented there my last engine build (actually it was my second, so "last" is a strong word). It's nothing fancy, just an old anchor, but I loved doing it. I finished it in 2019, I checked the oil pressure and it's still on the floor! I regularly turn it over... but I really need to find the time to fit it in the car. There are several posts about it, from conception to paintwork: www.nbrworks.com/category/60s-mini-stuff/ PS: Go easy on me 😃 I'm not a professional, just someone with a passion.

Hola Ramón. Gracias por tu comentario. ¿Tiene un enlace al punto Rhom? Lo busqué por internet pero no encontré nada similar.

Thanks, and welcome!

Thanks for the tip!

Hi. It's from Amadeal in the UK. I got it in 2019. "25" model (700x180 table). If you are in the US, look for the PM25MV by Precision Matthews, it's pretty much the same machine.

And make riser block under your mills column..

Yes, my set goes up to 30mm. A quick Google search show several places selling them. Thanks

Even if part weight more than 200 kilogrammes