Become a member of the community and donate to the channel. Thanks everyone!!! / @amddetailing Link for measurement :asdetailing.ba/product-tag/pr...
Пікірлер: 38
@ajd5363Ай бұрын
The problem with the mil gauge is that it measures all the paint including primer and base coat, not just the clear coat.
@johnwalters878Ай бұрын
This is exactly the problem. The only thickness guage that can measure individual layers is the DeFelsko Postitector 200. BUT it it will only work on plastic/composite. So theoretically if all panels, plastic and metal, you could get a measure for clear and subtract that value on all the panels that only can be measured by total thickness. But remember, this would only work if everything was painted the same .The whole measuring the paint is a gamble at best.
@ThedjcodemanАй бұрын
nice demonstration
@AmddetailingАй бұрын
Tnx bro
@OZIO84Ай бұрын
As always you are amazing, magician😎 Great job!💪👊
@AmddetailingАй бұрын
tnx my friend
@michalwiech96Ай бұрын
Amazing!!
@Mr.johanssonАй бұрын
Awsome video maestro🤩
@AmddetailingАй бұрын
tnx my friend and enjoy
@ExcentricDetailingАй бұрын
A meni bas izlazi veceras video gde isto objasnjavam oko merenja laka i smirglanja duboke ogrebotine :D Dobra prezentacija! :)
@AmddetailingАй бұрын
hvala ti,sretno sa kanalom
@zarkodimitrov8357Ай бұрын
Svaka čast i tebi Nidžo, super ti je zadnji video, a i generalno radiš izvrstno i mislim da smo mnogi od tebe puno koristnih stvari naučili. Hvala ti na tome.
@zarkodimitrov8357Ай бұрын
Fenomenalno brate, kao i uvek! Jedva čekam sledeći video. Primetio sam da ne koristiš više žutu Mirka vunu za grubu fazu poliranja. Čisto da znaš, ja je koristim po tvojoj preporuci i odradila mi je mnogo dobrog posla, tako da jedno veliko hvala tebi za sve savete do sad, pored tebe i još nekih momaka iz regiona zaista sam mnogo (teorije) naručio. Svaka vam čast, razvaljujete, a mi se vama ponosimo. 😉
@AmddetailingАй бұрын
Hvala ti a koristim je jos uvijek za tvrde lakove samo sto ne snimam sa njom
@appleitune5669Ай бұрын
Excellent work as usual but as you said this is only achievable with vehicles having 11:09 thickness above 200microns to start with BUT in our part of world a brand new car thickness won’t go beyond 100 on average or 120 occasionally😊keep up the good work👍
@AmddetailingАй бұрын
yes, you are right, I tested how much the coating will peel off, and it is 96 microns
@smOkyCSGOMoreАй бұрын
perfection
@AmddetailingАй бұрын
tnx
@Tonino59Ай бұрын
Complimenti, SEI number one Top Top, Saluti dall'Italia
@piotrrysio9515Ай бұрын
THX 😀😀😀😀😀
@brooks.5849Ай бұрын
Great video. I've learned so much from you. Do you recommend putting protection tape on edges? Thank you!
@AmddetailingАй бұрын
if you're not an expert, then glue yourself, but if you've been doing this job for a long time, there's no need, because you've got a feel for it and it's hard to make a mistake
@brooks.5849Ай бұрын
@@Amddetailing Thanks.
@user-mu5sq1ui1tАй бұрын
Doktor si….💪💪💪
@AmddetailingАй бұрын
hvala ti
@user-yb2tp4qf1rАй бұрын
Perfect sanding work. As a DIY guy which do it once in a long time, do you think that a cheap sander (basic Bosh, Dewalt, Makita...)is better than hand sanding?
@AmddetailingАй бұрын
every sander is better than manual sanding, especially electric sanders do not leave marks that you cannot remove by polishing, while air sanders are very aggressive and I do not recommend working with them
@datodato2205Ай бұрын
Great ❤ wich wool do you use on rotary machine ?
@AmddetailingАй бұрын
Tnx Ewocar Woll
@FEYNLAB25 күн бұрын
Amazing video! Would love to discuss potential collabs with you, is there an email address where we can reach you?
@domenicobizzarro839Ай бұрын
How many Buflex discs do you Need to Sand an entire car like that One?
@krawanizky3756Ай бұрын
Is it same to dry sand and wet sand a freshly painted car. I have difficulty to finish down after 3000grit. Always see deep into the clear sanding scratches.
@faegyrfvvc19 күн бұрын
Wrong paper choice. Use better quality paper and ensure you sand uniformly.
@autocitydetailАй бұрын
Doktor!
@AmddetailingАй бұрын
of course it's badly painted, do you have eyes or is this good for you, if this suits you, change your profession, this is not the job for you
@976charlie9Ай бұрын
Need to tape up the body lines.
@AmddetailingАй бұрын
if you're not an expert, then glue yourself, but if you've been doing this job for a long time, there's no need, because you've got a feel for it and it's hard to make a mistake