Sanding and Polish/TEST new HEAVY CUT compound

Рет қаралды 10,753

Amd detailing

9 ай бұрын

Become a member of the community and donate to the channel.
Thanks everyone!!!
/ @amddetailing

Пікірлер: 62

@muhammadhazmi4518 5 ай бұрын

Nice video man.. straight foward ..easy to understand..

@Amddetailing 4 ай бұрын

tnx

@thedudedublin 9 ай бұрын

👍i am new on your chane and i Love it , No blablablalblabla to say nothing....straight to the point...

@Amddetailing 9 ай бұрын

Tnx friend

@user-romanshvediuc 9 ай бұрын

Thanks for the video my friend. Everything is the best as always. All the same, it is very important which manufacturer of the pad.

@Amddetailing 9 ай бұрын

Yes

@ratton5028 9 ай бұрын

The Ewocar compound looks very impressive! Thanks for the video! 👋 Looking forward to your next one, 😎

@galintotev6983 Ай бұрын

Hi,I found your videos very helpful and well done.Thank you for your efforts and time.I have tried this new compound on an interior wood veneer panels but I was not very impressed to be fair.There were some scratches left after cutting.I think I need wet sanding with 2000 and 3000p first and after that this cutting compound.How do you do wood veneer panels polishing by the way?Thank you.

@martinmacchicanto4564 9 ай бұрын

thanks for sharing all this great info, can you make a video how do you tape the trim before polishing??

@jmolnar76 9 ай бұрын

OLLALLA.. cool prezentation.we love it...

@Amddetailing 9 ай бұрын

Tnx bro

@aihamhaddad2fm732 9 ай бұрын

Excellent man😉😉

@jennerguimaraes2309 9 ай бұрын

Vc usa lixa naturalmente,e o resultado fica otimo parabéns

@Steinstra-vj7wl 9 ай бұрын

Although the end result seems to be ok it took a long time for such as small sanded spot to shine.

@aelz9794 9 ай бұрын

Believe it or not nowdays detailers need 4-5 days to.polish the whole car, one day one compound, insane amount of time is needed....

@admir1743 9 ай бұрын

Top 💪

@nezinomas1748 2 ай бұрын

Is the ewocar heavy cut and heavy cut+ same

@michaeljordan6568 9 ай бұрын

Excellent work as always!! Where can the compound be purchased?

@Amddetailing 9 ай бұрын

Try Ewocar official page

@Mr.johansson 9 ай бұрын

Excellent work my friend 🤩it looks stunning 💪💪👌..have you tried it with a rotary polisher? It is always nice to try new products 😊

@Amddetailing 9 ай бұрын

that it also works on rotation and you can work with it for a long time

@stefan-stocksmadesimple5241 9 ай бұрын

Just me or this paste dusts like crazy...? Need to use more or less product in this case?

@kristhedetailer 9 ай бұрын

Great test master!I got a question.Carpro Ultracut or Ewocar Cut+? Whitch is better choice?less dust,easy wipe off,cut power…Thank you so much.

@Amddetailing 9 ай бұрын

Ewocar

@mayursinghcharan9329 9 ай бұрын

❤❤❤❤❤❤

@agahcakr400 9 ай бұрын

Good work,is it possible to remove orange peel just with wool pad and mirka 35 polarshine?

@Amddetailing 9 ай бұрын

No,you must sanding

@zzo28 5 ай бұрын

@@Amddetailing What about denim pad? For lighter orangepeel.

@farismahinic6959 3 ай бұрын

Postovanje Alene, gdje ima kupiti ovaj blok sa samoljepljivim smirglom ?

@Amddetailing 3 ай бұрын

As_detailing Mostar ili Kovax officielna stranica

@dyarzangana9604 9 ай бұрын

l searched for this produc but there is no ane detail in Google

@BrunoBMS 7 ай бұрын

I already purchased this but it dust like crazy.What can you say about that?Is it true that this compound dust more?

@Amddetailing 7 ай бұрын

@BrunoBMS 7 ай бұрын

@@Amddetailing so..my technique probably.Thanks

@zzo28 5 ай бұрын

Try washing the pad in bucket with norinse wash+ watter or dish cleaner + watter. Stick pad to the polisher and spin in bucket on max speed 2-5 seconds. Pad will be little bit wet. Do this after each section. No dust and you can run whole car with one pad still clean and cold. You dont need penetrate pad with compound. 👍 Or buy pad washer bucket like LakeCountry 4000 and u dont need unstick pad for washing and save velcro.

@Halford8080 9 ай бұрын

Nice test ;) carefull with the tolecut sanding paper, it doesnt like to be touched with your skin and can reduce the quality of sanding ;-) its good stuff by the way

@albertnisanov5093 9 ай бұрын

как всегда класс!!! Спасибо!💯💪

@Amddetailing 9 ай бұрын

Enjoy

@bjimsondetailing 9 ай бұрын

is dry sanding better than wet sanding

@Amddetailing 9 ай бұрын

kzfaq.info/get/bejne/hNCmmbt5r87RkZs.html Look this video

@bjimsondetailing 9 ай бұрын

watched and watch again .i can't stop watching this video thanks .i learn from the video

@UPS33S 9 ай бұрын

21 with 125mm backing plate?

@Amddetailing 9 ай бұрын

Yes

@Lfm599 9 ай бұрын

have seen slight traces of sanding but I think that with a sanding at p1200 it would come back much faster and with a better finish

@Amddetailing 9 ай бұрын

Nobody will grind with 800 and then polish, everyone who works works with 1500 and 2000 and for that granulation this compound is excellent

@Lfm599 9 ай бұрын

@@Amddetailing yes he looks very good 👍

@stefan-stocksmadesimple5241 9 ай бұрын

Didn't you work that small area for too long, causing heat buildup?

@Amddetailing 9 ай бұрын

Small

@interfantasy2010 9 ай бұрын

Buongiorno dove posso acquistare prodotti ewocar con spedizione ITALIA?

@Amddetailing 9 ай бұрын

Contact Ewocar official page

@interfantasy2010 9 ай бұрын

@@Amddetailing ci ho provato ma non danno risposta 😞😞😞😞

@interfantasy2010 9 ай бұрын

2 settimane fa ho mandato posta elettronica

@themetalfusionologist 9 ай бұрын

I’m kinda on board with a previous comment. I like your vids, but I gotta see this one in person to believe it. There’s just not enough factory paint for all that I don’t think.

@Amddetailing 9 ай бұрын

this is the factory paint on this mercedes

@barryjohnson127 9 ай бұрын

You're right I've had 45 yrs painting experience this is extremely hard not to go through the lacquer not impossible but will happen regularly.

@themetalfusionologist 9 ай бұрын

I wasn’t paying attention to the point to notice or not, but was it noted in the video this wasn’t a “factory” paint job? I ask because that could be misleading to someone who isn’t knowledgeable in this area. There’s a big difference between factory paint and what looks to be 2/3 coats of base and 4/5 coats of clear. Your vids are very informative to myself and others for some things we may not know and use your techniques. Saying this product is so “great” And not giving the full story of what’s it’s used on can easily end up causing someone else huge problems. Especially if their working on a customers car

@leonfr9137 8 ай бұрын

Doktore nije te bilo jedno vrijeme

@Amddetailing 8 ай бұрын

Tu sam nego ne znam vise sta da snimam

@leonfr9137 8 ай бұрын

@@Amddetailing I to sto kazes.Mada iz svakog tvog videa covjek moze dosta toga da nauci.

@barryjohnson127 9 ай бұрын

So when did you polish through the lacquer, and move the video to another section 😂not enough factory lacquer on to do this without burning through to the basecoat!?specially the way your polishing. Car painter 45yrs.good so i know.must be witchcraft your using because this doesn't work out in the real world.

@Amddetailing 9 ай бұрын

it's not a different section, it's a different corner, the door is the same (moved because of the shadow from the hand because it wouldn't be seen) and the easiest way to check it yourself is to buy a small bottle and try it and don't talk nonsense, because nothing is hidden or set up on my channel, it's the way it is

@barryjohnson127 9 ай бұрын

@Amddetailing well I've used most paint that's been around, and certainly don't talk nonsense! You said it yourself you moved to polishing another section, this technique looks good, but definitely don't work in the real working environment. When there are only microns of factory lacquer on the top no way even with the fine grades of paper your using and then cutting back the finish will you not go through the lacquer to the basecoat prove me wrong send me a sample and ill try it out!! With your paint. Best of luck with that 👍.