Dspiae ES-P Electric Sander + GH-10 Grinding set Unboxing

Dspiae ES-P Electric Sander + GH-10 Grinding set Unboxing | scale modeling

Рет қаралды 5,996

Жыл бұрын

Watch me as I open and review the DSPIAE ES-P electric grinder together with the GH-10 Burr Set. I also try to fit other conventional rotary tool bits and finally test the grinder on a piece of plastic.
Huge thanks goes to dukescalemodels for providing me with this interesting tool set. You can follow his amazing work on this Instagram page:
dukescalemodels...
Please Subscribe to keep updated with new content from me!
You can also keep up to date with my work on the social media accounts below:
/ jdm24scale
/ karl_scale_modeling
Thank you for Watching and don't forget to leave a Thumbs Up.
I'll be more than happy to answer to all of your comments too!
#unboxing #review #dspiae #tools #grinder #sanding #toolreview #modelbuilding #scalemodel #scalemodeling #grinding #custom #asmr #noise

Пікірлер: 34

@lukeduca6696 Жыл бұрын

Another great unboxing video as always mate!! 😊

@KarlScaleModeling Жыл бұрын

Hello there Luke, thanks for your constant support towards my work. That's very appreciated and also thanks for making this video possible ☺️👍🏼

@a.b.scalemodels Жыл бұрын

Well done Karl, another great unboxing.

@KarlScaleModeling Жыл бұрын

Thanks Adrian, that's very appreciated and also encouraging to keep making new videos too. So glad you like my content ☺️👍🏼

@JohnnysModelcars Жыл бұрын

Thank you, Karl for another interesting video 👍

@KarlScaleModeling Жыл бұрын

Hello Johnny, many thanks for your feedback and for your support towards my uploads. That's very appropriate my friend ☺️👍🏼

@michaelhintzmikesminiature1812 Жыл бұрын

Nice review. Thanks for sharing

@KarlScaleModeling Жыл бұрын

Thank you Michael, that's very appreciated and so glad you like my unboxing ☺️👍🏼

@DudleysScaleModelcars Жыл бұрын

Thank you for shaing this

@KarlScaleModeling Жыл бұрын

Thanks for your feedback Daniel, that's very appreciated.

@DudleysScaleModelcars Жыл бұрын

Your welcome @@KarlScaleModeling

@emilioaguirre1634 9 ай бұрын

If you're looking for more drill like bits for the Dspiae sanding grinder you might want to buy the Galaxy Tools adapter shank, T09K11 and its drill bits.

@KarlScaleModeling 9 ай бұрын

Hello Emilio, thank you very much for the suggestion. That's very appreciated because it's a great idea. I bought a universal drill chuck with a 3mm shaft and I'm still waiting for it to be delivered and try it out. Hearing that the T09K11 is a perfect match, I'll definitely search and buy that because I want to use the Dspiae grinder for different uses. Thanks again ☺️👍🏼

@stevewatts3502 Жыл бұрын

Looks the perfect tool for delicate work in awkward areas with... maybe less aggressive tools? Shocked at the torque, fer something so small. Dunno I could stump up the wonga for it, I like my MFA-Comos. Nice show-n-tell. 👍

@KarlScaleModeling Жыл бұрын

Hello there Steve, thank you very much for your feedback. That's appreciated and so glad you like. Yes it is quite torquey, I tried to push it hard on the surface of the plastic and it didn't stall! If it was my bigger rotary tool, it would have definitely stalled!

@robertmunoz7543 5 ай бұрын

There are different chuck adapters to allow different shank sizes!😁 Jman

@KarlScaleModeling 5 ай бұрын

Hello Robert, thanks for the information. Yes in fact I got an adapter chuck for this rotary tool and even made a new video about this. You can view this here: kzfaq.info/get/bejne/hK2IgtqanciXeIE.html

@joemoore4027 4 ай бұрын

Nice size too to handle, just limited to the bit size shanks at 3.0 mm. I had mine machined out to fit 1/18 shank bits and now it's worth the price.

@KarlScaleModeling 4 ай бұрын

Hello Joe, yes the size and weight is amazing to work with. Even the power, can't complain about that too because it did a good job at every piece of work I threw at it! Obviously, model related.. didn't try to drill the wall with it 😀 yes the 3mm limitation is boring as it limits us as to what bits can be used with it. The adapter shank is helping me a lot right now. Glad you managed to machine yours to a 1/8 shank, I'm sure you're using it much more now with that modification. Thanks for your message 👍🏼👍🏼

@joemoore4027 4 ай бұрын

@@KarlScaleModeling Thank you for the fast reply Karl ! With the 1/18 capacity it handles everything in my model toolbox. Great video on the tool review, looking forward to more videos from you Karl ! Cheers !

@KarlScaleModeling 4 ай бұрын

Thanks Joe, I'm glad you like my video review ☺️ that's amazing that with the 1/8 modification you can now use all your bits into the Dspiae tool. You can now use it to its full potential, not just with a 3mm bit. Unfortunately my model tool box has bits with different diameters so a variable solution is what's needed. That's why I'm currently using that cheap adapter, but I'm looking for a better alternative ☺️👍🏼

@williammarshall2935 4 ай бұрын

Great video. I also have the Galaxy version which takes 2.35 mm shank dremel bits. I probably will get another Dspiae one and drill it to 3.18mm for 1/8 shank bits . I like using the 5 & 10 mm sanding disks which are 3mm ,don't want them to wobble

@KarlScaleModeling 4 ай бұрын

Thank you for your feedback William, that's very appreciated and so glad you like the video ☺️ I can see that people are literally modifying the original chuck of the Dspiae tool, never had thought about that! I use different diameters of bits/tools so I would like a flexible option for it. My cheap adaptor does a good job for now, but I'm looking for something more durable and rigid 👍🏼 I did see the Galaxy one and it looks quite good too. Drilling to 3.18mm and then installing 3mm bits.. I would be afraid that they'll wobble even after tightening both allen screws. Dspiae should have issued a flexible chuck right away 😀👍🏼

@SelunaMiliki Ай бұрын

Стоматологические фрезы и боры с диаметром хвостовика 2,4 мм подойдут или только 3 мм?

@KarlScaleModeling Ай бұрын

Hello, the chuck accepts 3.0mm bits. If you insert 2.4mm ones they will most likely wobble since they would not be perfectly in the middle of the chuck. Hope that helps.

@Kmakaot 5 ай бұрын

Через 15 минут использования зашумел подшипник (щелчки), через 2 дня его полностью заклинило, одним словом «Китай». Но те первые 15 минут использования дарил экстремально позитивные впечатления, возможно мне попался брак.

@KarlScaleModeling 5 ай бұрын

Hello Kmakaot, thanks for letting me know about this. I have used this tool many times now and so far I didn't have any problems. But I haven't used it hard, only small jobs. Hopefully I won't have problems when it comes to polishing a whole car body ☺️👍🏼

@brushbros 8 ай бұрын

Very inconvenient chuck I must say.

@KarlScaleModeling 8 ай бұрын

Yes, have to agree about that. I prefer a conventional chuck that is adjustable to any shaft diameter you might want to use. I got this to be used with their polishing pads, so for me it's not a big problem. But I still would have loved using other bits on it ☺️

@c123bthunderpig 2 ай бұрын

Way too expensive for what you get.

@KarlScaleModeling 2 ай бұрын

Thanks for your feedback 👍🏼 I had some coupons when I bought this, so can't complain about price 😊 but the 3mm chuck limitation is something I'm not happy about! Would have been better if it was an adjustable one 😏