@gennadyklepikov969, You say 6 programs, but there are only 3 programs to work with. Now the part you need to do is Program 1, you have two outputs Zone 1 and 2, as part of your programming, set up Zone1 for the time to start, how long and the rest, then under program 1 setup Zone2 for the start , how long. You will do this for each of the programs, P1,P2, and P3. I think you will see that both outputs can have different times. When you are in P1, set Zone1 to the time to start. Hit Zone key to go to Zone 2 and set it to the time, can be the same or different. Go to P2 do the same and P3 the same. There you have your 6 times that will just run as you have programmed.

⁠Thanks, Sam. But I still need your help. I programmed : Zone 1 Program 1 at 7.00 a.m, Zone 1 Program 2 at 13.00, Zone 1 program 3 at 19.00. Zone 2 program 1 at 10.00 a.m ; Zone 2 program 2 at 16.00 ; Zone 2 program 3 at 22.00. I need somehow to make it run. Unsuccessful yet… Maybe you can help. One more question, how to restart this gadget to clean up all the program? Just take out battery does not helped.

@@gennadyklepikov969 You must also set the how long and how often for each program zone. Be careful when using Ok and Set, the set saves the setting, Ok moves to the next setting and Ok will delete a setting. I suggest setting a test setting just P1 zone 1 and zone 2 to the next day. Set both zones before you hit set to go to how long, and do this all the way through. When you are complete leave on Auto and that starts the timer running for all your programs. When you get it set right, you can push any button and see Next Zone1 and the time to start. I did find you must have at least 1 day set in advance for it to work. I messed up a few times before I got it working correctly. Just set times 2 min duration and then you will see the zone is on when you see water drop icon at the times they are suppose to come on. Oh, to delete a program timer, just set how long to zero for each program you do not want. Off turns timer off and does not run.

@@samowens44, Thanks Sam. Finally I did it. It was to many times pushed OK button. In this timer OK also cancel previous choice. Thanks.

@@gennadyklepikov969 Yes, the Ok did mess me up over and over until I realized it's true function at certain points of the programming. Glad you go it, I know the feeling when the lightbulb comes on!!!!