Easy to tell the exhaust is what's got you most stoked
@andrepaquet6597 Жыл бұрын
Very nice bike indeed. The first thing I would add is the crash bars / pins. They are simple pins that go on each side of the bike that look nice and protect the bike in case of a drop.
@benwhitey999 Жыл бұрын
Hey man, lovely bike. Just thought you'd like to know, rather than reaching in to that fiddley switch, just press the unlock/ignition button underneath your starter button. As long as you have your wireless key you can switch the bike on just pressing that button instead of trying to reach your fingers in that annoying switch area. Ride safe 🤘🏼
@GringoDuca Жыл бұрын
You are so right. It was locked away for a couple of months i completely forgot.
@zacharymallory8727 Жыл бұрын
Such a filthy machine. Love it
@bobburgess8143 Жыл бұрын
You need to get a "Sprint" air filter. It will make a difference in performance. As for what you have done now, it is spot on. Great job.
@briansupermag3918 Жыл бұрын
So beautiful. My decisions is between the new v4 diavel or the rocket 3 R. Congrats on the bike and ride safe
@WayneWithers-ex4ty Жыл бұрын
congrats on your new purchase add a genuine windshield, carbon headlight surround, carbon front and rear guards, rearset bolt change to black and if you are not taking passengers take off the rear foot pegs it cleans it up nicely i have done this to my 2022 diavel
@GringoDuca Жыл бұрын
I'll do that, great idea. Thanks
@mikemccormick8115 Жыл бұрын
Gorgeous
@JimmyScooter5 ай бұрын
Simply gorgeous. Any problems with installing Termignoni exhaust? Did it require an UP MAP? Or software adjustment? Or was it a simple mechanical installation?
@kraigjames5513 Жыл бұрын
Beautiful bike... I've been thinking of getting one for a while!
@GringoDuca Жыл бұрын
You should!
@billcarson4566 Жыл бұрын
Don't put a rack on that buetifull bike.
@1911Earthling Жыл бұрын
Mirrors no. Love the clutch , brake and gas cap covers!
@davidmorse941 Жыл бұрын
Add some frame plugs and nicer lower frame plugs like on mine. 😀
@GringoDuca Жыл бұрын
Good idea!
@gsmworld_2001Ай бұрын
very nicemachine.... where did you get/buy taillights incl turnlights (indicatorlights)
@jourdantolentino Жыл бұрын
Nice cover
@GringoDuca Жыл бұрын
Many many thanks
@nic675427 күн бұрын
Those rear-view mirrors have to go bro. Rear-view mirrors are next to useless on a bike. Some nice little bar end mirrors would rock. But thats just me. Otherwise ❤❤❤
@joeslattery3 ай бұрын
reflectors off the forks would look better
@jbelsoufla4747 Жыл бұрын
That phone holder should be a SP
@GringoDuca Жыл бұрын
What's an SP?
@hakanozdemir6113 Жыл бұрын
Hey thanks for the video. Any reason you decided to go for the 1260s over the v4? Thanks
@coboisarapatanas Жыл бұрын
I have some evotech parts in my mts 950s. I'm finding low quality and weak construction. I had a stopped drop, and the hand guard just warped. I wouldn't recommend it, to protect the bike against drops. Evotech will be replaced for Barkbusters
@GringoDuca Жыл бұрын
Wow, good to know.
@Chris-ou8ud Жыл бұрын
How did you buy the Exhaust? I am trying to get the same exhaust but I can’t get it shipped to me in California (I’m from Florida). Just wondering if it’s just California…😢
@markettradinggenius Жыл бұрын
Question; how reliable is this bike compared to a suzuki hayabusa as far as longevity without mechanical issues or electrical issues are concerned ?
@GringoDuca Жыл бұрын
I don't know. Sorry
@arsalyot3533 Жыл бұрын
Hello! What module are you using for the turn signals into stop light? Please give a link
@GringoDuca Жыл бұрын
I'm sorry but I have no idea. My dealer installed it.
@RSGTAR Жыл бұрын
Hi, Where did you get the tank protector pad? Thanks!
@GringoDuca Жыл бұрын
Dealer. It's made for a Panigale V4.
@RSGTAR Жыл бұрын
@@GringoDuca Thank you!
@stefan27 Жыл бұрын
Hi! First of all I wish you safe rides and thousands of enjoyable kilometers (or miles I guess) for your brand new motorcycle! I do own a 2020 model (you can check some videos of mine with the diavel in my channel) and thinking to put on the termignoni exhaust! However, I'm pretty worried that in max lean angles it might touch the ground and get ruined... Would it be possible for you to perform a static trial or something similar as still I'm trying to get the answer from other owners or dealers on what will happen on the exhaust if the foot pegs are dragging through the asphalt...!!?? Thanks in advance!
@GringoDuca Жыл бұрын
Great question. Before the bike went back to the shop, i did ride it for 300+ miles through a lot Twisties here in Michigan. Now I'm no super racer leaner by any means but I did curve into some corners and didn't see or hear any damages to the exhaust. Hope that helps. I will take my bike out to the track this season so I can let you know by then. Safe ride.
@stefan27 Жыл бұрын
@@GringoDuca Many thanks for your prompt response! I doubt that Ducati and Termignoni designers haven't assessed this condition of max lean angles, however as it looks there might still be a risk of scratching the exhaust specially in right turns... I hope in your track sessions to not experience such an issue! In case you have any news or even a static test result, I would be glad to hear! Enjoy your beauty!
@ducattitude623 Жыл бұрын
The Diavel 1260 has a 41 degree lean angle so as long as you don't exceed that you should be fine. Did a bunch of mountain runs with it (Deals Gap) and never had an issue of scrapping the exhaust. Although I'm no racer, I was taking decent angle in those Twisties. Fun time !
@stefan27 Жыл бұрын
@@ducattitude623 There is a great fun indeed and thanks a lot for your input!! Appreciated! I have the Ducati link app logging 43 degrees and maybe more in some rides without it recording. The foot pegs are wasted.... I know that someone can say that this bike ain't for such use however as mentioned there is so much fun that cannot resist!!!
@Peanutdenver Жыл бұрын
I'm not a Diavel owner but have ridden the 23 1260S demo for a week when I was having some goodies put on my SF V4S. Your pegs will scrape not the termis when leaning the bike over significantly, I personally experienced this though it wasn't really too concerning other than damaging the pegs it didn't really upset the bike. This is an engineering thought by termi way before the pipes go into production so you would never half to worry about it.
@1911Earthling Жыл бұрын
Black red and yellow?
@GringoDuca Жыл бұрын
True.
@1911Earthling Жыл бұрын
@@GringoDuca it is a magnificent bike. I hope it brings you many smiles and excitement. Enjoy congratulations!
@1911Earthling Жыл бұрын
@@GringoDuca my jealousy far outweighs any criticism. LOL
@bllade23 Жыл бұрын
you dont have protections on side on bike if bike fall on the side...
@GringoDuca Жыл бұрын
I got it recently. Thanks.
@richardcerritelli9657 Жыл бұрын
I'm going to spend $26,500 on a motorcycle and then decide to do upgrades should it already be on the bike for that price LOL it's ridiculous you might as well buy a zx1400 for 16500 that leaves you 10.000 in upgrades to match this. Then put LSL handlebar conversion kit for 1500 then you can buy an instrument panel for around 2000 now you just changed zx1400 into a cruiser with an additional 6500 bucks in your pocket and on top of that the zx1400 way more performance than this. However I will say the Ducati Diaval V4 I am willing to look at that bike for my next bike if it has everything I want without modifying it I just don't understand it does not make sense these idiots that modified their bikes especially spending that kind of money.
@domlong7056 Жыл бұрын
Did they tell you that’s a 2023? Cause 2023 models are all v4. That’s a 19-22 model. She’s gorgeous tho, I have it in black and steel. If you ride like I do steering damper is a must.
@GringoDuca Жыл бұрын
Yes, it's manufactured in 2023. If you visit Ducati, they still sell the 1260S
@bladerunner750 Жыл бұрын
@@GringoDuca It may have been manufactured in 2023 but It's not the new V-4 Diavel. So it's instantly an out of date bike.
@GringoDuca Жыл бұрын
@@bladerunner750obviously. who said this was the V4? I didn't. What I said was my bike was manufactured in 2023 but it's the 1260s model. They still make the 1260s.