Рет қаралды 42,335
A fun mod for Ducati Monster by DUCABIKE. Gives a cosmetic flare to the bike as well as some practical uses like changing your clutch plates on the go without having to remove the entire oil bath. Saved $600+ worth of labor at the dealership. Honestly the hardest part was removing the OEM cover. All in all, it was a fun job and seeing it all come together in the end was very fulfilling. First ride out the next day had heads turning, it's a head-turning mod if you will. :P
Vehicle:
- 2018 Ducati Monster 1200 S
---------------------------------------------------------------------------------------------------------------------------
Parts:
- DucaBike Oil Bath(Black)/Clear window+rim(black)
- DucaBike Pressure plate(Gold)
- DucaBike Pressure inner ring(Black)
---------------------------------------------------------------------------------------------------------------------------
Tools used:
- 5mm T-handle
- 4mm T-handle
- 5mm allen head bit with a step down adapter
- 10mm socket
- 3 lb rubber mallet
- 20mm bearing remover
- Torque wrench(make sure yours goes to 10nm)
- Liquid Gasket rated for correct temperature
- Torch lighter
- Needle-nose pliers
- 3M absorbant pads
- Blue thread locker
- Lintless cloth
---------------------------------------------------------------------------------------------------------------------------