Ducati Panigale on a BUDGET Part 3 - Fork Seal and Air Filter

Рет қаралды 18,781

Күн бұрын

Hi guys!
I hope you find this video helpful. I paid to get my forks done a few years ago and as you'll see in the video, they left one side of my forks in a horrible condition. This video shows you how I changed my forks on a budget.
0:00 Let's get started!
0:05 Air filter
5:44 Fork seal
15:07 Next time...
Air Filter - www.ebay.co.uk/itm/K-N-Air-Fi...
Fork Oil Suspension Tool - www.ebay.co.uk/itm/Motorcycle...
Fork Seal Driver Tool - www.ebay.co.uk/itm/43mm-Motor...
Ohlins Fork Cap Tool - www.ebay.co.uk/itm/Ducati-Sup...
Fork Oil - www.ebay.co.uk/itm/Motul-Fork...
Fork Oil and Dust Seals - www.ebay.co.uk/itm/ALL-BALLS-...
Next video - Cleaning brakes and changing brake and clutch fluid.
Thanks for watching!

Пікірлер: 73

@flexjay87 Жыл бұрын

Ingenuity, tools, and talent = The Trifecta of a good shop !

@zrcarbon9937 10 ай бұрын

Thanks so much! 🏍🛠🤟

@Judo7Nine 2 жыл бұрын

The greatest of thanks for posting a series of videos like this. You rock bro. Subbed. 17 1299s

@zrcarbon9937 2 жыл бұрын

Thanks so much, I appreciate it! Keep riding your lovely bike!!!

@RaulMarincas Жыл бұрын

i'm about to do mine, really helpful to see someone do it before to clear any unknowns from what i will encounter.

@zrcarbon9937 Жыл бұрын

Thanks, I’m glad my video helped you out. Good luck with your project 🛠️🤘

@robertmalone731 2 жыл бұрын

Great video! Keep them coming.. great innovation for the homemade shop tools. Will be working on my 2013 Ducati PanigaleS using your videos. Thanks

@zrcarbon9937 2 жыл бұрын

Thanks so much! Will plenty more videos to come! 🛠🏍🤘

@cafebaraco84 2 жыл бұрын

Good job! I can watch this all day.

@zrcarbon9937 2 жыл бұрын

Thanks so much! Some serious stuff coming soon. I just bought a 1299 superleggera swingarm. 🏍🛠🤟

@johngreen3510 3 ай бұрын

Very late new subscriber thanking you for a great video.. never seen servicing on forks before, really interesting, thanks again

@Shinysideup 3 жыл бұрын

Nice job with some awesome home made tools.

@zrcarbon9937 3 жыл бұрын

Thanks so much man! Trying hard 🏍🛠🤟

@jaimevasquez930 3 жыл бұрын

Genial!!! excelente video, great job, congratulations

@zrcarbon9937 3 жыл бұрын

Thanks so much! Appreciate it!

@danielstafford7255 Жыл бұрын

Just came across your channel, on my 3rd video, great stuff 👍

@zrcarbon9937 Жыл бұрын

Thanks so much 🏍️🛠️🤘

@anon295 2 жыл бұрын

1199s failed its MOT on leaking fork seal, thought these fancy electronic shocks would be difficult. Luckily I found your video and decided to do it all myself, seems to have worked a treat. Thank you for your help!

@zrcarbon9937 2 жыл бұрын

Thanks so much for watching! I’m happy my video have been useful for you! I really appreciate your feedback! 🏍🛠🤘

@claytonantunes54 11 ай бұрын

Quantos ml vai na suspensao da 1199s?

@loredanaferreri 6 ай бұрын

Complimenti!! Bel lavoro molto ingegnoso 🤙🏻

@zrcarbon9937 4 ай бұрын

Thanks so much for the kind words 🛠️🤘

@exupakias Жыл бұрын

Pro, well done

@zrcarbon9937 Жыл бұрын

Thanks so much for your compliment!

@jeremyh172 2 жыл бұрын

Great video

@zrcarbon9937 2 жыл бұрын

Thanks so much! 🏍🛠🤟

@loredanaferreri 2 жыл бұрын

Complimenti bel video bravo🤙🏻

@zrcarbon9937 2 жыл бұрын

Thank you!!! 🛠🏍

@stevegriffith7236 2 жыл бұрын

Maybe a video on valve adjustments?

@zrcarbon9937 2 жыл бұрын

I’m planning to do that for sure!!! Will get a detailed video up 🤘

@stevegriffith7236 2 жыл бұрын

I hope so soon. my panigale is due in 1200 miles. I have seen a half ass video on it and feel I can do it my self with a little instruction. Would love to see your how to video. So far I think your better than most.

@jeffgarcia9982 3 жыл бұрын

Awesome video! I have a 2018 panigale 959. I have a slight leak on the left fork. Would a lot of these be similar if I worked on it myself? Also I'm close to my 15,000 miles as well. Do you know how I can do a valve adjustment and what exact tools I would need? Thanks for your time and keep up the great videos!

@zrcarbon9937 3 жыл бұрын

Hey, Jeff! Thanks I appreciate your comment. The 959 is a great bike 🏍. If you have an oil leak developed on your fork you must get those fork seals changed. It’s dangerous to ride the bike with an oil leak. To do the annual valve adjustment, it’s not difficult but it can be tricky. I would suggest to do some research before you start. Check out this link to give you an idea about the process: kzfaq.info/get/bejne/rLqio7WJrcCceWg.html I suggest you buy a Ducati service manual. You’ll find all the part numbers and tools what you’ll need for this work. I’ll be doing a video of this process around September or October 😎

@JosiasRivera 6 ай бұрын

You could of put the pre load back in before reinstalling correct? Nice video. Can't believe no one has done one for the V4S.

@zrcarbon9937 5 ай бұрын

Yes of course I could put back the preload. I just redone all the settings. That was the only reason why I didn’t do that. Thanks so much for watching 🛠️🤘

@DP-wf6df 3 жыл бұрын

はじめまして、私も1199Sに乗ってます。とても参考になりました。有難うございます🌠

@zrcarbon9937 3 жыл бұрын

Thanks so much for watching and for your kind words. Keep running your Ducati! 🏍🛠👊🏻

@ShahrukhKhan-vl6vv 2 жыл бұрын

Awesome

@zrcarbon9937 2 жыл бұрын

Thanks!

@chromaticmusic 16 күн бұрын

Question... the original dirty filter was a K&N and could have been reused after a cleaning and oiling. Was there a reason to replace it other than for the sake of the video?

@smc2811 3 ай бұрын

Hi, is the other side leg of the fork the same ?

@Fireblade21 Жыл бұрын

The workshop manual (at least the one I have) says 155cc for oil level instead of your 155mm. Yours seem more accurate. That threw me off a bit when I did mine. Also says 8 "clicks" for preload. How many turns was your factory set preload? Thanks

@zrcarbon9937 10 ай бұрын

Hey When I was looking for some data about the fork oil level on forums all I found is the 155mm. Same, the workshop manual was spinning me out as well. 155cc oil is seamed a bit too little. I decide to go with the 155mm. Since than I had no issues. I used 7 full turns. I found that the best for my weight. 88kg

@klaustukas2 3 жыл бұрын

The washer in the fork has flat and round edge. On 9:58 is difficult to see but flat edge of the washer should face the seal. Here is more explanation: kzfaq.info/get/bejne/nL1-iZx30K7VkZs.html

@catblack1785 5 ай бұрын

❤

@aaberrill Жыл бұрын

How easy do those fork outer tubes scratch? Or did you manage to remove and install without any issues? Great video

@zrcarbon9937 Жыл бұрын

Hey Thanks for your compliment. You have to be gentle when you pulling the seals out. Don't push your screwdriver all the way to the fork tube wall. I managed the job with out any scratches on the wall. Thanks for watching

@ianfoster5253 Жыл бұрын

Plastic Tools are available

@superrepair9681 3 жыл бұрын

Osaam ❤️

@zrcarbon9937 3 жыл бұрын

Thanks very much!

@Skyerzen Жыл бұрын

Is there a reason you pulled the spring out? The shop manual doesn't call for that when doing the seals. It also says to replace the bushings. Is there a reason you didn't do that?

@zrcarbon9937 3 ай бұрын

I wanted to wipe of the spring and just pull apart and see what's inside. I didn't remove the bushing because I haven't had the proper tools for it.

@HieuNguyen-px9gf 3 жыл бұрын

Beauty! Btw what stand do you use?

@zrcarbon9937 3 жыл бұрын

Thanks so much! I use the ABBA motorcycle sky lift. It’s cheaper than a lift table and more space efficient.

@stevegriffith7236 2 жыл бұрын

Any chance you can put up a torque specs. For this bike?

@zrcarbon9937 2 жыл бұрын

Which torque specs would you like to know?

@stevegriffith7236 2 жыл бұрын

Well I was hoping there was a list on everything . I'm a car transmission rebuilder, and I have lists of several torque specs from valve bodies, to pumps, basically anything I want to find on a transmission I can find the spec. I can't find much on my bike. Axle nuts, swingarm bolts, etc. Anything of a book with specs ?

@duclife1059 Жыл бұрын

Have you installed the carbon swingarm?

@zrcarbon9937 Жыл бұрын

Hey No, I didn’t get around that job. Life was just so in the way. Hopefully in the future 🤞

@TheJlagosd 3 жыл бұрын

in the rebote fork , sound like aire ? i have the same and sound like aire ins side ...

@zrcarbon9937 3 жыл бұрын

Hey Yes you are right, it is air.

@TheJlagosd 3 жыл бұрын

After you arm yourself and dress level, you see that air continues to sound, 155mm with the spacer? the telescope was working well?

@zrcarbon9937 3 жыл бұрын

You have to remove the air by moving the rod up and down. Then it will be fine.

@dinot71 2 жыл бұрын

Aren't you supposed to put some type of oil on that k&n air filter? I sure put it on mine!!!

@claytonantunes54 11 ай бұрын

Quantos ml vai na suspensao da 1199s?

@zrcarbon9937 11 ай бұрын

If I remember right I think it’s 255ml I’m not sure about it

@targetoz5470 3 ай бұрын

Is there any reason why you could not unbolt the damper??

@zrcarbon9937 3 ай бұрын

No. Don't have to do that to remove the forks.

@targetoz5470 3 ай бұрын

Why I ask is, if you could unbolt the damper then you wouldn’t need to unscrew the spring holder nut

@vilchezjo 2 ай бұрын

@acvn-hg9gy 2 жыл бұрын

Never knew the panigale had a shower injector lol

@zrcarbon9937 2 жыл бұрын

It’s cool right 🙂 I’m amazed every time I work on this bike Thanks for watching 🛠🏍🤟

@gman3725 3 жыл бұрын

Oil impregnated filters like KNN’s screw up the mass air unit. Eventually the hot wire in the unit will have a buildup of oil on it from the filer and you’ll end up with a mass air meter code.