Рет қаралды 1,138
I am not able to get 3 valve, 3 orifice to work substantially better than 2 valve, 2 nozzle orifice. There is not enough air available with the orifice size I am currently using with 2 valve and reduced to an overall volume of 2 valve OG duct.
Getting better results now with the 2 valve , 3 nozzle orifice.
Months and months back I made a 3 valve, 3 nozzle orifice duct that was centered around the nozzle. I felt that was the best choice due to the 360° coverage of the air. I used it for some time, and IIRC, I went to print something that did not cool well on a speed print. I removed the duct and put the 2 valve and it was good. So I wanted to revisit this and see if I can make it work... Not yet.. I may need a different approach for the next one.