For anyone watching who is who isn't a professional mechanic and is attempting repairs that involve removing the valve body, I would recommend using a plastic scraper against any of the mating surfaces on the valve body or transmission case to remove gasket material. Using a plastic scraper will help you to avoid gouging any of the metal. That way you wont get any leaks when you put everything back together. Great video! Liked and subbed
@dudewecanfixit2 жыл бұрын
We appreciate your generous feedback! Feedback like this help us on what more information needs to be in every video. Thank you for liking and subbing!
@ronnythebest1943 Жыл бұрын
😅l
@TrainerFromUnova Жыл бұрын
I used an angle grinder with a rust remover adapter. It was going well until the adapter caught the edge of the gasket and bent it... I saw some other guy putting the separator plate into boiling water and then just scraping it off.
@vindief0p Жыл бұрын
@@TrainerFromUnova 😶
@Edsvettes698 ай бұрын
I was able to take your teaching and put in the time to comprehend what each lesson achieved. After around 2 months of procrastinating , I started the teardown and rebuilding.I used all the old parts as my kit. Amazing things started happening, and after 10 assemblies I was ready to order my new kit😢🎉
@damapema3 жыл бұрын
Thank you very much, with the knowledge shared by you I was able to rebuild my transmission, now my Tahoe is running like new again. Greetings from Colombia. Gracias!
@dudewecanfixit3 жыл бұрын
We are so happy to hear our video was able to help! Make sure to like and subscribe for any future videos and support 😂
@JJ-my9uw11 күн бұрын
Warn everyone that this unit is HEAVY! I learned a lot from this video and definitely determined leave it to the experts and purchase a rebuild.
@coolpeanuts234 жыл бұрын
Awesome! Best fix it channel on KZfaq!
@RamzyTheDad2 жыл бұрын
the spring cage compressor is pure ol genius. love it! I also now realize I need a torch in my garage
@dudewecanfixit2 жыл бұрын
Yep, you always need to be able to fab something up
@SandyMcFadden4 жыл бұрын
Love this...... I am a girl who helps works on her mans videos I love how concise this video is and you show every tool and step utilized in completing the project..........
@dudewecanfixit4 жыл бұрын
Thank you for the comment! Please help us out and share this channel with some friends.
@SandyMcFadden4 жыл бұрын
@@dudewecanfixit Sure did just shared on my Facebook Feed...................
@dudewecanfixit4 жыл бұрын
Awesome, thank you so much!
@carstars1181 Жыл бұрын
Thanks for the excellent video. I am about to tackle the re-assembly of my 4l60e and although I've never done it before, I am confident that with the help of great videos like yours, I can make it happen. Keep up the good work!!!
@dudewecanfixit Жыл бұрын
Thanks! Take your time and you will get it right the first time.
@Jeffrey_Mason2 ай бұрын
This video was excellent! I rebuilt my 5.3 and was trying to decide whether to buy a trans or get mine rebuilt because its missing 3rd and 4th gears. After doing a lot of research and watching vids, Im going to rebuild it myself and use this video as a step by step for my teardown. Thanks again for a great video.,
@dudewecanfixitАй бұрын
You're welcome! Take your time and have fun in the process!
@amsolutions247llc34 жыл бұрын
Doing amazing! Love the intro and appreciate the quality and it being straight to the point
That little snap ring holding on the planetary gear.... is a bastard... good video guys thank you. Hope to get my trans done this week.
@juanperez-il7dh11 ай бұрын
Never knew how much goes into the transmission honestly I now know why there is transmission specialists, i think there is more to the transmission than an engine
@dudewecanfixit9 ай бұрын
Agreed, the transmission is a very complex assembly.
@franciscoenamorado96855 ай бұрын
Excellent the way you teach it is very clear who ever want to Lerner you have the talent you teach how to do easy congratulation
@dudewecanfixit5 ай бұрын
You're very welcome! Beyond happy to help in anyway we can
@Sean-zc3iv Жыл бұрын
Great videos on this 4l60e. Was on the fence about doing it but now ima just get it done! Thanks
@dudewecanfixit Жыл бұрын
That's great! You can fix it!
@sindycruz87844 жыл бұрын
New here! Will definitely show this to my husband! Ty for these videos
@coreycritoph283611 ай бұрын
Awsome video watching this i got it tore down to the spring cage in 40 mins got to make myself a lawn mower blade tool somehow to take it out cant wait to put it back together
@dudewecanfixit11 ай бұрын
That's awesome! You can order a spring cage compressor online if you don't have the resources to build one.
@grouchygrouchpa51046 ай бұрын
just want to thank you guys. you helped me a ton. keep up the great work!
@dudewecanfixit6 ай бұрын
Happy to help!
@douglasmueller46843 жыл бұрын
Took me a half hour to remove the bell housing bolts with a 1/2 inch impact but it did work.
@dustyweasel413 жыл бұрын
Most helpful video on this I’ve seen. Thanks
@dudewecanfixit3 жыл бұрын
Thanks! We put a lot of work into this video
@dustyweasel413 жыл бұрын
@@dudewecanfixit it shows man. I just now had the time to tear it down. Pulled up this video and kept pausing until it was done. Thanks again
@dudewecanfixit3 жыл бұрын
That's great! I'm glad it was a good resource for you
@gregmccarter2176 Жыл бұрын
One thing I do with everything I work on, is take a photo..lay out the parts in group order..make sure the area and parts are clean..
@dudewecanfixit Жыл бұрын
Organization is very important! Especially with complicated parts that you might not be familiar with
@justincrasi46383 жыл бұрын
you can also weld a nut to the bel housing bolt and the heat will allow you to break it loose and remove it.
@dudewecanfixit3 жыл бұрын
I could see that working. Just need to be careful around the aluminum parts of the transmission housing as they will melt at relatively low temperatures.
@dudewecanfixitshorts4 жыл бұрын
Beautiful video!
@dab69016 ай бұрын
I got a 2008 avalanche can’t wait to try to fix it myself
@dudewecanfixit5 ай бұрын
I like the motivation!
@seanharracksingh279 Жыл бұрын
Great Video. Perfect fir first timer DIYer
@dudewecanfixit Жыл бұрын
I'm glad you enjoyed it!
@Murdahmami204 жыл бұрын
AWESOME VIDEO!
@skeeterschultz80324 жыл бұрын
Cool
@larryhart48802 жыл бұрын
Like the baggies . Done that a few times myself
@dudewecanfixit2 жыл бұрын
With that many parts you have to stay organized lol
@doccpu72 жыл бұрын
mega thumbs up. i have used a tap to thread a couple of the front pump holes so can stick a couple bolts in it to pull the pump. be sure to pull the one solenoid out of the front pump so dont break it. Why oh why dont they put a connector on the lock up solenoid? I guess so they can get mega dollah to change just the solenoid or the wiring harness. Typical of car manu's to get an extra buck.
@dudewecanfixit2 жыл бұрын
Thanks for the comment!
@KRTube752 жыл бұрын
A PVC pipe fitting works really well for making a spring cage compressor.
@dudewecanfixit2 жыл бұрын
Interesting, please elaborate
@boogerhead0 Жыл бұрын
Bell housing bolts: 1) Heat with heat gun for easy removal... heat the aluminum boss. 2) If one still remains, a cold chisel with a few love taps will usually get the screw to turn. Drilling is excessive work, and easy outs are generally a waste of time. Heat is best... A plain heat gun on HI does it.
@dudewecanfixit Жыл бұрын
We appreciate the words of advice 💪🏼
@spacesuitor9 ай бұрын
When Dad gets home and sees you did this shit on his air hockey table, he is gonna be pissed! 😱
@dudewecanfixit9 ай бұрын
Absolutely fatherless around these parts 🤌🏼
@Atlas.X9X Жыл бұрын
Great video, thanks for sharing.
@dudewecanfixit Жыл бұрын
Thank you for watching!
@David_does_it_all3 жыл бұрын
Plan on rebuilding my transmission on my 97 k1500..
@papergatorzfedducca79983 жыл бұрын
Great details!!!🔥🔥🔥🔥
@leegold67444 ай бұрын
I have a 4l60e I need to swap input shafts on to be able to mate to a ls style engine, in order to remove the whole drum assembly does the pan and everything under the pan have to be removed to pull the drum assembly? Or can I just open the front and undo the band and slide the drum out?
@dudewecanfixitАй бұрын
Thats a great question, and I don't have the answer..
@TheForerunner1173 жыл бұрын
So you think if I just wanted to fix my 3/4 on a high mileage trans with just a cheap transtec kit that comes with the piston and clutches and just check for leaks at the check ball and just rebuild the drum but leave the planetary gear and everything else behind it alone I’d be good?
@dudewecanfixit3 жыл бұрын
Yes, as long as your hard parts are in good shape, you could just replace the clutches (frictions & steels) and pistons.
@Brees19862 жыл бұрын
Once the transmission is completely disassembled, how do you recommend cleaning the casing? Is it okay to pressure wash? Can you “hot tank” it in boiling water?
@dudewecanfixit2 жыл бұрын
The case is aluminum, so you can use water. Just be 110% sure that it is completely dry before you begin reassembly. Personally, I use paint thinner in my wash station to clean everything
@christiandupree8963 Жыл бұрын
Doing a teardown myself and wanted to point out there is a ninth bearing in the center near the rear of the valve body, may be held in by a retainer, can’t tell. I noticed it after dumping trans fluid and didn’t need to remove it so I didn’t try.
@dudewecanfixit Жыл бұрын
That's interesting, good find!
@sunburnt86 Жыл бұрын
What solutions do you use to clean your transmission parts? My transmission exterior has oil and sand caked on it and the interior has small metal debri and shaving in it, thank you for a great video.
@dudewecanfixit Жыл бұрын
I plug the holes and pressure wash the outside. Scrub tough areas with a metal brush and paint thinner. I use paint thinner or mineral oil as a cleaner inside and out.
@sunburnt86 Жыл бұрын
Thank you
@Pharmguy8510 ай бұрын
What tool did you use to remove the snap ring from the spring cage @27:20? I’ve tried different sets of snap ring pliers but they are all too big to fit down there.
@dudewecanfixit9 ай бұрын
Oh, wow. That part must have got chopped in the video editing process. I have a few different sets of snap ring pliers and some small flathead screwdrivers that I remember trying when I was doing that
@Pharmguy859 ай бұрын
FYI I found out that there are 3 main types of snap ring pliers. Angled (which are the main ones out there) then there are straight and curved ones. I have all three now, but I was able to get that snap ring with ease using the curved pair. Allowed me to get into the recessed groove the ring was in.
@dudewecanfixit9 ай бұрын
That's fantastic, that's for sharing that info about the snap ring pliers also
@talltree90147 ай бұрын
thank you brother i live in the remote bush up north , where you fix your own cartruck i am doing my own trannys colorado tahoe and suburban , and ford too c4c6 and OD4spd fords uuugh fml lol
@dudewecanfixit7 ай бұрын
Oh, wow! Where do you live at?
@talltree90147 ай бұрын
hey thanks for your response dude , i live in a lil'place called Houston,BC with about 2ooo people at the most, its pretty quiet here now the snow's here and the cars n trucks are buried lol , so study and learn on youtube hahahaa, cfn dude @@dudewecanfixit
@dudewecanfixit7 ай бұрын
That's wild, business slows down but never stops in Louisiana. Snow is very rare. You're right, it's a great time to study and learn!
@STEVEEDGАй бұрын
I cant remove the ring gear because the forward planetary broke and left the tail part of it on the shaft yikes I might need another case i have no idea on how to remove it
@dudewecanfixitАй бұрын
Oh, wow. That sounds rough. Do what you can to remove it, but you might be correct on getting a new case
@davem162 жыл бұрын
Subscribed, you guys rock
@dudewecanfixit2 жыл бұрын
Thanks, you rock!
@gustavomelendez55143 жыл бұрын
Thanks sr
@eroom20873 жыл бұрын
Heat is your friend on stubborn bolts
@dudewecanfixit3 жыл бұрын
Definitely, you are correct
@matthewarellano302 жыл бұрын
My first time attempting to work on a transmission. Do you need to take off transmission to get to the input speed sensor, or can you access it through the oil pan? Thanks
@dudewecanfixit2 жыл бұрын
The input speed sensor is mounted to the driver side of the transmission housing. You do not need to take anything off to access it
@giovannilopez94272 жыл бұрын
hey man wondering if you could help me out I have a 2011 Silverado with 4l60e I have first and second gear doesn’t catch 3rd or 4th. What could he the issues I was thinking about replacing the shift solenoids and the torque converter solenoid
@dudewecanfixit2 жыл бұрын
Most likely a worn out 3/4 clutch pack or a bad sprag.
@jessemartinez052 Жыл бұрын
Can you make this video savable for future reference? I have a 4L60E playlist where I'm saving content.
@dudewecanfixit Жыл бұрын
I'm not sure how that works. Perhaps you can bookmark it in your browser
@jefffrayer8238 Жыл бұрын
Click on 3 dots at bottom right and place it in your " Watch Later " file. Vid stays there for you to reference any time.
@paulyoung48143 жыл бұрын
Thanks
@dudewecanfixit3 жыл бұрын
You're welcome!
@thecarbaddie Жыл бұрын
great video
@dudewecanfixit Жыл бұрын
Thank you! We try our best 😁
@isaiasrobles1951 Жыл бұрын
What are the two outside bolts with orange called
@dudewecanfixit Жыл бұрын
Can you give me a time stamp in the video and I'll take a look
@tryingtosurvive8518 Жыл бұрын
Is this the same as a 2005 Avalanche 4x4 4l60e?
@dudewecanfixit Жыл бұрын
Yes
@oculophilia21303 жыл бұрын
if you get a stuck bolt just use a rotary disk to cut a channel in it and then walk it out with a flat head screw driver.
@dudewecanfixit3 жыл бұрын
That's a good tip, I've done it before
@cody41283 жыл бұрын
I couldn't hear it in the video but what year model and engine is this transmission from?
@dudewecanfixit3 жыл бұрын
This is a 4l60e in a 2003 Chevy Tahoe. Engine is 5.3L Vortec. This is the transmission that goes in any Tahoe, suburban, Yukon, Yukon XL, Sierra, and Silverado from 1993 through 2009
@dudewecanfixit3 жыл бұрын
Available engines that match from Chevy and GMC are the 1990s 4.3 & 5.7, and the 1999+ 4.8, 5.3, and 6.0.
@klumsytone Жыл бұрын
Help, sir! After removing the snap ring at 23:17 I can’t move forward. I tried to hammer the output shaft after that, but it won’t come out. It’s looks like the steels are not centered so it don’t come off. How can I recenter it or remove the anti clunk spring?
@dudewecanfixit Жыл бұрын
Remove as many components as you can and then tap the output shaft
@klumsytone Жыл бұрын
@@dudewecanfixit the anti-clunk spring was preventing it to come out. I had to somehow move it out of the way.
@dudewecanfixit Жыл бұрын
Nice, I'm glad you figured it out!
@randy1ization Жыл бұрын
are all of the balls the same size.
@dudewecanfixit Жыл бұрын
Yes
@juanbravo167 Жыл бұрын
Muy bueno
@dudewecanfixit Жыл бұрын
Thanks!
@David_does_it_all3 жыл бұрын
Watched all video's not in order but all.. One qestion hows the transmission doing now?
@dudewecanfixit3 жыл бұрын
The transmission is still working flawlessly! The Tahoe is our company truck, so we put some hard miles on it for sure and I'm thrilled to attest that it is performing!
@HanifEFIMechanical2 жыл бұрын
Good work Good
@dudewecanfixit2 жыл бұрын
Thank you!
@Nate-Da-Gr8 Жыл бұрын
I'm trying to ask if anyone can answer I'm trying to unplug or disconnect that grey connector that's round with the green o ring on it when replacing the shift kit stuff since I been trying to pull on it but it's not moving how do I get it out??
@dudewecanfixit Жыл бұрын
Go to 19:00 in the video. I show how to remove it
@jake_break91852 ай бұрын
How many check balls are there supposed to be?
@dudewecanfixit2 ай бұрын
I can't say off the top of my head. It should be in the video
@alex6261971 Жыл бұрын
where are you guys located
@dudewecanfixit11 ай бұрын
Louisiana
@kriskringle83 жыл бұрын
If the transmission works but not in reverse, would you say its the planetary reverse piston?
@dudewecanfixit3 жыл бұрын
There are several things it could be. No reverse: “lo-reverse” clutches are worn out, fluid leak in the reverse apply circuit, or broken sunshell are common problems. It's difficult to tell until you open the transmission up
@kriskringle83 жыл бұрын
@@dudewecanfixit yeah from my research, im leaning towards sunshell. Hummer H2s are suggested the HD versions for replacement. Awesome video!
@dudewecanfixit3 жыл бұрын
Definitely get a hardened sunshell! Always a good upgrade. I think monster transmission sells them
@dudewecanfixit3 жыл бұрын
Also when the sun shell breaks, usually you will lose a couple forward gears as well...
@kriskringle83 жыл бұрын
@@dudewecanfixit in park and nuetral it makes a loud whining sound. All other gears seem to drive normal, but ill test it to be sure. Ive been DIYing project Mercedes cars and i fell in love w them. Now im turning my attention to GM, specifically hummer h2 rn.
@stich19602 жыл бұрын
On a scale of 1-10 how bad of an idea is it to rebuild your own transmission for someone who has never done it before?
@DrFiero2 жыл бұрын
11
@derucktorez2260 Жыл бұрын
The idea is insane. But sadly sometimes sane men are lead to do insane things.
@bobitwhite2 жыл бұрын
STAND TRANS ON TAIL SHAFT AND DRILL OUT PUSHING DOWN EASYER MORE POWER LESS STAIN ON YOU
@MeaHeaR3 жыл бұрын
This Pull Apart is identical to Trar-Mission Bench Pull-Apart withé James Williams ¡¡¡¡ But there's a few X-Tra bits of info withé this, thanks Guys 👍👍
@dudewecanfixit3 жыл бұрын
Thanks!
@dennissytsma35612 жыл бұрын
Please turn on the closed captaining option so I can watch without disrupting the baby
@dudewecanfixit2 жыл бұрын
You got it!
@deanbaker66063 жыл бұрын
Wipe down the gasket and compare your new one to the old one before you take it off
@dudewecanfixit3 жыл бұрын
That is always a good idea. I compare belts also.
@MrLosgonzalez873 жыл бұрын
Probably could of used a small torch to heat them Two bolts off just a lil heat..!!
@MrLosgonzalez873 жыл бұрын
Good video two thumbs up brotha!!
@dudewecanfixit3 жыл бұрын
You are probably correct, I have used heat successfully in the past
@dudewecanfixit Жыл бұрын
New video alert! kzfaq.info/get/bejne/m7qPps-U3ai6YYU.html
@davidl51213 жыл бұрын
Would of left the bell housing bolts alone
@gearshifterg97563 жыл бұрын
Are you suggesting to not remove the bell housing bolts to rebuild the transmission??? PLEASE make a video of that.
@David_does_it_all3 жыл бұрын
Ill subscribe..
@dudewecanfixit3 жыл бұрын
Awesome, thanks for the subscribe! It helps us more than you know.
@andymartinez4823 жыл бұрын
Dam good shit my boi
@dudewecanfixit3 жыл бұрын
Thanks!
@gehteuchnixan9027 Жыл бұрын
True Porn, i watch at night. Is something wrong with me? 🤔
@dudewecanfixit11 ай бұрын
This is basically a OF account 😂
@randy1ization Жыл бұрын
yall are working too hard, next time weld a nut to the top of the stripped case bolt, then turn it right out. no drilling required. no chisel required.
@dudewecanfixit Жыл бұрын
That is a great way to do it. However, as a DIY instructional, I try to use only common tools that most people have. You are assuming access to a welder and knowledge of how to use it safely near an aluminum housing. I do have a welder, but most people don't and I make these videos for most people.
@randy1ization Жыл бұрын
@@dudewecanfixit good point, keep the vids coming my friend! heres another tip, when welding small parts together, glue them together with superglue, to keep them aligned, then weld them,.
@dudewecanfixit Жыл бұрын
That's a great tip! Thanks
@gearshifterg97563 жыл бұрын
You stripped out the 2 case bolts because you did not seat the torx bit into the bolt. I could not help but to LOL OUT LOUD.....putting pieces in baggies. (Face palm) That was a washer on the sun shell, not a bushing. And remove the extension housing (tail shaft) seal with a screwdriver and hammer BEFORE you remove the housing. It is more stable. And why not throw away the large "o" ring when you remove the rear housing? Oh yeah, you know how to build a transmission and don't have a rear piston removal tool? W H A T ??????
@dudewecanfixit2 жыл бұрын
Two monks approached a river. There was a lady trying to cross the river. One monk picked her up and carried her to the other side. Later that evening, the other monk says "we are not allowed to touch women". The first monk looks at him and says "I put her down 3 hours ago, are you still carrying her?".
@gearshifterg97562 жыл бұрын
@@dudewecanfixit I remember when that happened. They were both under a vow of silence, and had to start all over.
@howardjohnson6584 Жыл бұрын
So you need a 10mm socket as well?
@dudewecanfixit Жыл бұрын
??
@howardjohnson6584 Жыл бұрын
@@dudewecanfixit Dont you need a 10 mm as well?
@dudewecanfixit Жыл бұрын
I always need a 10mm, I don't leave the house without it
@howardjohnson6584 Жыл бұрын
@@dudewecanfixit Womans gun
@dudewecanfixit Жыл бұрын
I'm taking about the socket, lol
@howardjohnson6584 Жыл бұрын
Never had bell housing bolt I couldn't get out. You know why? Because before trying to remove them I would take a big round punch and smack the heck out of the head of the bolt with a hammer.