Incredible speed and accuracy. This guy makes it look so easy! lol

Awesome video! Made tinting my car a lot easier. Simplifies whole process and does a great job showing the correct way of doing it. I used water and baby shampoo in a spray bottle

Looks like a professional job to me. A few problems I was going to encounter that other tinting videos did not resolve were resolved after watching this video. Thank you.

ive watched alot of tint vids. by far this guy is the best. no bs

Great job! There's some new things I hadn't seen in other videos. I've tried tinting my curvy rear window 10 times now but this video might give me the confidence to try one more time

Very good technique, and I congratulate very clean work, greetings from Venezuela.

How come when you rolled it up the plastic covering was facing you but then when you rolled it on inside it was still facing you?? I thought you rolled it on the inside

Dammmm he makes it look so easy, it took me 2 hours to do my back window jajajajaja...

OHHHHHH!!! I get it...the clear switches sides when you unroll! Thats why you wet it so much, so it's loose an doesn't stick! Got it...Magic! Great job Sir!

Ah you're absolutely right i apologize I skipped the end thinking surely you had left it on the back after all the shrinking and precision work

Good job done. . makes it look easy. Good clear view too. I'm ready to have a go now 👌

I watched this video since I want to tint my windows. After watching it I'm certain you're some kind of freak and that it's insanely hard lol.

dont the clear film side have the sticky side that goes on the glass? it appears that its the opposite?

Best and Quickest technique 👍🏼

For all those who are curious about his technique, it's called reverse roll. You can google it. Don't worry, glue is on the glass even if liner came outside. Magic happens!

Its great job. Like the way u work. I am shams from muscat oman. I am the llumar tint champ from middle east.

The roll technic are brilliant!!

I used black see through paint. Took me 1 minute.

Damnnnn.. is look so easy when you do it matev :) hahh . I make myone horible , but i learn something from you. I have to try again, the problem for me was that on c3 2006 , the rear wondow is very curve....

Is it me or at the 8min mark, he's applying his film and he pulls off the clear leaving the sticky side out? Not to the window? Am I seeing this right?

very nicely done

ziet er strak uit mannen :D Ik heb de mijne in duitsland laten tinten. ook super goed bevallen.

I believe in part the trick here is Patrick's skill and the other part is the high priced tint he is using, I used Gila tint from Wal-Mart and it isn't as easy as that. I have played around long enough and wasted enough tint to figure out how to do it with the cheap tint but I don't advise anyone to follow my efforts , doing this is like discovering the new frontier all over . I don't think many can get there where Patrick is using cheap tint and if they figure it out , its ten times the work.

Aren't the layer between the transparent film and the layer on the tint itself supposed to go againt the glass when mounting it to the intended surface? He peeled it off after mounting it on the rear inside glass (intended surface). WTF, am I missing something? 8:15

j'ai révé ou le coter avec le film transparent (le coter ou il y a la colle donc) n'est pas placer sur la vitre mais vers l'intérieur du véhicule ? parce que la ce n'est pas coller c'est juste l'éléctricité statique qui tient le film ...

Sweet vid, i like checking out other tinters methods.

this is something new i will give it a try

Haha you make it look so easy. Great job

Hii Dutch Dutch, i look your video from France and like your technique ! No squeegee even with the hand during dry shrinking!It's seems to be good result and great quality on this clio ! I try to do the same on my A4 sedan year 10, have you got some tips to get perfect finishing on the periphery of the window ?Thanks and a new time : great job !!

As angrydonut said, is the film on the other way? Or it's a 3 layered type film? At the inside, you peel out the film from the outside, where it supposed to be a "glue" in between. Can you please clarify this? And it's a very nice job! Did my windows at home 2 days ago.. and they are a mess lol. I might redo them.

Nice job

Very impressive indeed.

Does anybody know if he put baby powder on the back window before he began the process? I see him rubbing the back window before he began, just wondering if he rubbed something on the back window in the beginning of the video?

Damn right! Nice work!

I'm a diy and I have tinted glass back in the day. Nowadays I have the money to just let a shop do it but these clowns raised their prices BAD......Like I guess COVID. Did a number. I flat out asked the last shop what the hell was going on and she said the tint product went way up. I don't believe it as I can go online and buy tint in bulk. Anyway.....I got my rear window all cut out but I didn't do all the prep on the outside like you did using a heat gun. I tried doing it on the inside. I threw it away so now.....I'm going to try it again.

I missed something. Rolled the film I get, but unrolling with the sticky side out? What did I miss?

Gossie, ik dacht dat het nooit goed zou komen. Lol. Great job. 👍🏿

looks like you installed the adhesive side out. When you removed the clear film. That equals to a wrong install.

Ok so I was about to post a sour comment: "Am I the only one putting window tint on the inside?", but the video unfolded a very nice trick instead. Neat work :-)

How come when he heat shrinks the tint on the car he has the clear plastic facing up. But when he installs the tint the clear plastic is facing down. Shouldn't it be facing up since it formed the tint up?

well the way we do almost the same within same time but little different method, tiny bit of powder and use hand to get rid of creases and its much more safer way. the way you shrink the paper i tried couple of times but there is a risk involved of burning the paper out but its good for you tho.

Buena técnica

He does make that look easy but what I really wanted to see was a rear window on a sedan (very sloped)...that's what I am facing...great job tho...

He's very professional

can some one tell me how to do reverse roll . im confuce when i watch this video.

Amazing skills bro.

what kind of tint is this? and what temperature you use?

It appears that the film is put on the window on the wrong side, since the clear backing is removed from the side closest to you. I went to bed thinking this was voodoo. I woke up and realised that the "water spraying and rolling stage" held the clue (in magicians way of thinking) and was essential to this trick, where the film releases from the backing on the now wet side/glue side and transfers over to the layer behind it, thus when unrolled, the glue is in fact now near the window and the backing near the installer. *Genius!*

The layer is on the wrong side?,,

how long an install is it, factoring removing the lip spoiler? 25 mins?

when a guy starts whistling, you know, the window done fucked up 😂😂😂

Exatamente a forma como faço. Essa é a melhor técnica para moldar.

great job😍😍😍

What kind of film is it . I’ve been tinting for over 30yr never seen tint shrink like that

What is deemed acceptable as a passable tint job? I just recently had mine done and it's short in some areas and had minor specs of dirt on my driver side, which I can live with (very very small). Just curious coming from professionals what's passable?

what % tint did you use on the back.

Hello . good job . Tell me please. what is the name of the foil? Factory name?

nice job. GG . what's the name of the tint u using?

my ebay film just krinkles and gets creased if I heat it up that much maybe it's cheap garbage

se o plastico transparente tava pra fora como que a cola estava pro lado de dentro?

I dont understand he pulled the clear plastic off at the end but the sticky side is under that plastic, no? So the sticky side was not on the window???

Dude...nice work but i watched the part where u roll the film like 10 times.how the adhesive side goes to the glass?

Great Vid...

can you still by it in a spray can ?,i used it onec on me 100e ford pop.

Waarom staat er Zwitsal op het dak?

Heat gain on high speed or low speed plz tell me

8:18 he peals the protective film off and has the tint facing the wrong side or am i seeing something wrong here?

I'am is installer window film from indonesia since 1999..txu

Esa técnica de termoformacion funciona con cualquier tipo de film?

So what brand of film did you use

Any way you can show how you rolled the tint the way you did never seen it done like that ????????

una pregunta quisiera saber cual es la conbinacion para el liquido que rosea

Haĺlo mooi werk maar de beschermlaag zit toch normaal tussen de raam en de folie? En niet aan de buitenkant?

what brand of tint is that and where can I find it? TX USA

Can you tell me if Garware NR is good for modeling?

WHATS THE NAME BRAND OF THE TINT YOU USING

el pegante de el polarizado quedo al revez me parece en el momento de intalarlo internamente

hi there, i need to tint the front window, it apply the same technique or i need to use the gloves? thanx in advance

nice work! what type of heat gun do you like using? we are looking for something with stronger airflow. we are using the typical Ultra Heat hot air tool. Thank you

Hoe heet zo'n ding dat het heet maakt? en de vloeistof die je erop spuit voor je het folie aan de binnenkant plakt?

Which window film that do you use?

very good job!

Hi there, please what is that white powder you just applied in first seconds with hand? And what is the water? Its enought to use soap water? Thank you

Name of film please

Esta mal lo moldeo bien pero cuando lo puso adentro y le saco el vinilo transparente el pegamento quedó para el otro lado no para el lado del vidrio

Welk type merk folie gebruiken jullie eigenlijk

Hey man, first I wanna say awesome video! You have a lot of skills, you are a pro. I just want to know what kind of tint you are using and also what is the heat setting on your gun??

Isn't the side where you pull the plastic off, the part that should stick against the window? or am I wrong?

Troppo bravo complimenti

external film?

very nice.

Which brand paper use it

I still old scool wet shrink lol. Is that baby powder?

Can somebody explain why the heatgun is needed? what it does ?

Wait. At 8:18, when he peel off the film, where is the adhesive side? Its very confusing. Can someone explain?

Hey, I just call it as I see it. That's all my friend!

Hey Dutch I was always under the impression that tint is supposed to go on the inside of the window? Is that a different style of film or something or am I just completely wrong? Please help me understand

Just wondering.. what brand of film is this? I noticed this film is very good quality being that you were able to heat shrink the whole window at one shot with a lot of heat and didn't burn or crease and pretty much molded itself.

What is the best tint for dry 114 degree climate for your car

Cometaar hebben mensen tog en zelf kunnen ze het niet goed bezig mooi werk