In this video we show you how to set up time and attendance function on a Hikvision Face Rec Terminal. #Hikvision
Пікірлер: 62
@vanessataschner54372 жыл бұрын
Saved me hours - Thanks!
@weldeamanuelbirhanu35973 ай бұрын
This video helps me a lot. Thank you so much !
@joe1z3923 жыл бұрын
Thank you! This video saves me. The manual is confusing.
@whitewhite5923 жыл бұрын
Super👍
@2gigatechnologies925 Жыл бұрын
nice one
@travismailsa13 жыл бұрын
What other facial recognition models are available for time and attendance. There is alot of acces control units, but not sure if they support T&A Would like a basic unit, like what zkteco offers.
@mjchannel9463 жыл бұрын
good morning dave.. I have a question, how do I synchronize 2 devices for the same data? is it possible
@duncangrixti1813 жыл бұрын
Hi thank for the reply on the door villa keypad. Im seeing the new ip version in stainless steel, would you recommend it over the original meterial? In long term usage for weather proofing and sunlight which meterial would you recommend me? And also regards the 7" monitor i believe its the 8350 wte is it worth the double the price over the 7" 6320? All i can see is the frame and picture quality
@DVSLTD3 жыл бұрын
I do like the new Stainless steel , it has the same functions essentially but some prefer the look , it feels more robust also , the indoor station again does very similar function but the look and feel can be important to some
@crismaistry1795 Жыл бұрын
hi, great videos. Can you please tell me how to configure 2 readers,
@justinkinsey55173 жыл бұрын
Excellent instruction, I have a question, does the iVMS 4200 work for all the NVR s and devices and if you use IVMS do you even need an NVR or could you just use a NAS or something like that for storage
@DVSLTD3 жыл бұрын
you can do thew report with just the terminal and 4200 yes , that is the video explanation , if you cant get it to work , maybe a remote session is needed
@justinkinsey55173 жыл бұрын
@@DVSLTD many thanks, really have enjoyed and learned a lot from your videos
@Investor_3602 жыл бұрын
I can’t seem to get the correction information when trying to calculate check in and check out times to get the time worked coz the two are incorrect using IVMS 4200
@giftmankga73023 жыл бұрын
Can you please do a video showing report and graphs for temperature readings overtime and to what extent I want to see the low temps and high temps incase the device is used in outdoor conditions
@DVSLTD3 жыл бұрын
we don’t recommend this for outdoor use sorry
@ahmedhusham7373 жыл бұрын
Is it possible to use 2 face recognition terminals for one door. One for entry and the other for exit with time attendance. So we can monitor when staff entered and exited.
@DVSLTD3 жыл бұрын
yes this is entirely possible , and setup via the 4200 or HIK-Central function
@hritikjain559510 ай бұрын
Please make a video on hikvision cloud Attendance also which is done by hikpartner pro app and hikconnect app
@lancerzalzos95173 жыл бұрын
Hi Thank you for this tutorial. I would like to ask if is it possible to configure the timein and out ? no need to click the checkin/checkout?
@DVSLTD3 жыл бұрын
you can set check in to auto , manual or both and adjust in report also
@lancerzalzos95173 жыл бұрын
@@DVSLTD i already set the device T&A to auto. but when I tried to scan my temperature it is always default to "Break In". is there's a way where I can set the time-in duration(ex. from if you scan from 9am-9:30am all person would automatically check-in and from 5pm-5:30pm would be automatically check-out)?
@lancerzalzos95173 жыл бұрын
@@DVSLTD Thanks. I already found where to configure it. i don't have shift scheduled assigned to specific person or department thats why i was not able to select auto in T&A. but when I assigned there shift scheduled everything work fine. Thanks Again. Like and Subscribe Done...
@DVSLTD3 жыл бұрын
@@lancerzalzos9517 😊
@giftmankga73023 жыл бұрын
@DVS do you recommend this device for indoor or out door use?
@DVSLTD3 жыл бұрын
this is indoor due to thermal sensor , 😊 but we do other models that can be used outdoor if needed
@jonpaulosiglos2 жыл бұрын
Is it possible to set one face recognition terminal for both entry and exit (automatically, removing the step where one needs to press check in or check out)? Currently setup up 1 terminal but it always records check in.
@DVSLTD2 жыл бұрын
Yes you can set it for check in and out , with manual setting
@jonpaulosiglos2 жыл бұрын
@@DVSLTD thanks! Wanted to set up the device in our office but without the touching part as covid control. Sad that I cant fully automate the check in/out part. Other question, is there a report in the IVMS where I can automatically see the total number of people who checked in (or literally inside the room)?
@jordaanbotha9775 Жыл бұрын
Something whent wrong on my setup and I need to factory the device. Does someone know how you can do this.
@dyarmzere3469 Жыл бұрын
Hi I am trying to get all the times for the person print but it only getting one time
@rafixx123 жыл бұрын
Hi Dave where is model this unit it it this DS-K1T671TM-3XF? BR Rafal
@DVSLTD3 жыл бұрын
I have done a separate video on that unit on the channel 😊
@giftmankga73023 жыл бұрын
Can this exact HikVison device presented for screening and facial recognition make calls? Can we link them to telephones 📞 at remove locations?
@DVSLTD3 жыл бұрын
Hi , it can be linked to the master station phones or the indoor stations , rather than SIP phones, SIP in the UK is quite large but we do have some integration with out indoor stations
@robertkiyingi7224 Жыл бұрын
Thanks alot. I would like to enquire can i use hiks time and attendance system as a school attendance both for the school & Parents. That is can this be configured such that it can send sms alerts to parents?
@eminmemmedov48952 ай бұрын
yeah it is possible
@khalilalkhanafsa38033 жыл бұрын
Hello thanks for videos I will install intercome ip This is component Access module and main unit and display screen I can’t add devices in ivms4200 Can you help my.
@DVSLTD3 жыл бұрын
you will need to use the latest 4200 , have you update this ?
@yazanalfarra67883 жыл бұрын
@@DVSLTD Please reply to my comment I need an answer urgently if possible
@crismaistry1795 Жыл бұрын
HIKVISION Mini Face Recognition Terminal -341A DS-K1T341AMF one for entry and the other for exit mode
@terryhill8111 Жыл бұрын
Hi how do you get you database back not showing
@MrMr1236 ай бұрын
Can you do access control with time and attendance 🤔
@weldeamanuelbirhanu35973 ай бұрын
yes
@Answerx323 жыл бұрын
Is it possible to configure it to measure the temperature and grant access to all the visitors (even those who are not in the database)? At the same time, I want it to recognise the people that are in the database and log their name and time of attendance.
@mikemalm90022 жыл бұрын
good morning guys, please can someone help. I forget the password of my hikvision Fingerprint Time Attendance Terminal. Model ds-k1a802amf-b
@martinlaurence17172 жыл бұрын
contact support@hikvision.com
@orange11squares2 жыл бұрын
an advice: next time when you record set your monitor to HD 1280x720 b/c with the resolution you used you barely understand anything in the video, everything is extremely small, you practically need a 32" tv to make out anything.
@funnyvideo-un8zt3 жыл бұрын
how to MySQL third party database connections ivms 4200
@DVSLTD3 жыл бұрын
we can send reports from T&A to this , or inside HIK-Central there are more options for integration work
@MrDinakdakan2 жыл бұрын
mapped fields, no data on temperature
@honeyveracruz5233 жыл бұрын
Where did you get the IP address sir when you add the device?
@honeyveracruz5233 жыл бұрын
I've been trying to follow this tutorial but unfortunately the device was offline. How to do this online like on your tutorial. It was automatically indicated online.
@DVSLTD3 жыл бұрын
I set this via SADP 😊
@honeyveracruz5233 жыл бұрын
@@DVSLTD thank you so much.☺️
@honeyveracruz5233 жыл бұрын
@DVSLTD And one more thing. I couldn't find the setting on how to view my name in checking in or checking out like what you did on 5:19. Badly need help.
@DVSLTD3 жыл бұрын
@@honeyveracruz523 to show your name the unit has to have your face and details uploaded to the unit , assuming this has been done ?, if it’s the HIK thermal model please check its not set to temperature read only in the unit menu as this will stop the faces and T&A being active 😊