No video
DYNO PULLS / TUNE - LEXUS IS300 BUILT VVTI 2JZ-GE TURBO BUILD
Рет қаралды 16,544
Күн бұрынSHE'S ALIVE!!! - for all of you that follow us on instagram you would have seen a sneak peak last week... @automotiv8ed_
@automotiv8ed_
@automotiv8ed_
We are excited to say, that the Is300 is running on its own power, check out the awesome custom exhaust and the insane pulls on the dyno. Bare in mind this is only a run in tune for the next 1000km before we can turn up the boost and listen to her sing.
Special thanks to everyone that helped out!
And thank you to Eco Performance Tuning for fitting us in last minute
/ ecoperformancetuning
Andrew for taking his time to come out and do his magic
/ billtech.automotive
Fresh Finish car detailing for the awesome wash and detail
/ freshfinishdetailing
@YBA2J 2 жыл бұрын
Watching the build series has inspired me to build a 2JZGE+T for my GT86. Motor is stripped down, waiting for parts.
@AutoMotiv8ed 2 жыл бұрын
Hey man that sounds so awesome!! Glad to be apart of your inspiration towards your build 🙏🙏 would deffinatly love to hear more on your build once your up and going
@kasinong2413 2 жыл бұрын
Can't wait for final dyno numbers
@AutoMotiv8ed 2 жыл бұрын
Not long to go!! 🙏
@Brinks84 2 жыл бұрын
Great sounding sleeper. I am definitely copying that exhaust setup. Nice job guys can’t wait for full tune (607whp)
@AutoMotiv8ed 2 жыл бұрын
Deffinatly was our goal for this one!! Can't wait too my man not long to go!! Will be stoked with 600hp lets gooo!! 🙏
@SouthernCrossMotors 2 жыл бұрын
Great video. I currently have a ISF and have always wanted to do a nice IS300 like yours. I am moving the ISF on and will start looking for a neat IS300. Hard to find unmolested ones. Aim for similar power at the wheels the F has (412) and the lighter car would perform really nicely. Hope to see the final run on your car 👍
@AutoMotiv8ed 2 жыл бұрын
Thank you mate!! Is300 handles amazing and surly 400hp is achievable by a bolt on turbo kit + supporting mods and some e85 fuel! The ISF has to be one of our dreams cars, there is something about that raw v8 beast that excites us. Final run video was included at the end of out price guide video we recently uploaded on how much the build cost us, but unfortunately the is300 is sold, we had a solid offer and couldn't pass it up.
@SouthernCrossMotors 2 жыл бұрын
@@AutoMotiv8ed Thanks for the reply :) I just also meant to let you know that I ran a 12.15 in the ISF, full weight with only floor mats and engine cover removed. I am sure it would run an 11.9 with seats, spare tyre etc etc removed. kzfaq.infoLIneSHGPVZA?feature=share
@alexjaybrady Жыл бұрын
nice, cheers!
@AutoMotiv8ed Жыл бұрын
Thank you! Cheers!
@Johnny-jp6nq 2 жыл бұрын
Let's goo new vid
@AutoMotiv8ed 2 жыл бұрын
🙏🙏
@reececarpenter7426 2 жыл бұрын
Can I have some more information on your whole exhaust setup? Absolutely love the sound of it 👍
@AutoMotiv8ed 2 жыл бұрын
custom 3" system all the way through, with a 200 cell high flow catalytic conveter, and a vibrant performance black muffler + tip
@abelalfaro4115 Жыл бұрын
Was originally gonna do a GTE swap but since I wanted modest HP was told a GE+ T is a better idea
@AutoMotiv8ed Жыл бұрын
GE+t is good fun, we love it and if we had the choice would do it all over again
@kurt8986 9 ай бұрын
❤❤🎉
@AutoMotiv8ed 9 ай бұрын
🙏🙏
@freddygranja5105 7 ай бұрын
if running a haltech Standalone why have 4 oxygen sensors pre and after cat? don’t you need just 1 wide-band?
@AutoMotiv8ed 7 ай бұрын
Nice spot sir, we ended up disconnecting the oxygen sensors and kept 1 wideband sensor
@0Petercool0 Жыл бұрын
hey bro where did you get the touch screen head unit from?
@AutoMotiv8ed Жыл бұрын
we purchased this one from our local car audio store. (Strathfield car radios)
@MinaTadros1 2 жыл бұрын
That car is not strapped down properly 🤦♂
@makanaaskew9580 Жыл бұрын
what blow off valve are you using it sounds amazing
@rohantariq7507 Жыл бұрын
Looks like a greddy type s. They no longer make them so it's probably a replica.
@AutoMotiv8ed Жыл бұрын
Bov came in the cx racing intercooler kit
@jasoncottee2980 2 жыл бұрын
Do you guys find the T56 Magnum F to be loud at idle and deceleration under 2000rpm in the Soup? Just imported to Aus and installed the Grannas swap with a Mcleod stage 4 single disc clutch. It does feel amazing, shits all over an auto, but not sure if the noise from it is normal. Everything I read says it will be noisy being a slingle mass flywheel but most ppls videos seem quieter.
@Brinks84 2 жыл бұрын
I have the same kit in my 02 is300 and the single mass flywheel is a little noisy, but well worth the t56 magnum F.
@AutoMotiv8ed 2 жыл бұрын
@Jason Cottee in all honesty yes, the T56 Magnum F is alittle too noisy, especially with the steel bellhousing, but its such an awesome upgrade compared to any auto or w58/r154, and even the cd009.
@AutoMotiv8ed 2 жыл бұрын
@@Brinks84 defiantly agreed!!😁
@paulsmith7788 2 жыл бұрын
What have you done with the a650e to make it handle that power?
@AutoMotiv8ed 2 жыл бұрын
new video coming soon about this...
@bolivarharrigan6027 2 жыл бұрын
What the head and cylinder set up
@AutoMotiv8ed 2 жыл бұрын
check out the build series on our channel, all parts used are in there kzfaq.info/sun/PLXNYmmUPJp-mPYRZuXrvula_cjWN_Bvn2
@jesve8120 2 жыл бұрын
whens the next video?
@AutoMotiv8ed 2 жыл бұрын
next one should be out within the next week or so 😊
@fspec8529 Жыл бұрын
Which wheels are those?
@AutoMotiv8ed Жыл бұрын
Rays TRD T3
@killswitch6673 Жыл бұрын
Who car is this?
@AutoMotiv8ed Жыл бұрын
@Nicko . He is part of our Automotiv8ed crew
@marioandultrachap Жыл бұрын
these arent stock cams are they?
@AutoMotiv8ed Жыл бұрын
no, they are Kelford 272-278 cams, check out our full build series video where we explain everything to do with this 2jz kzfaq.info/get/bejne/jq99lK92s728imQ.html kzfaq.info/get/bejne/gp6XbKl-kre4g5c.html
@tristansmith7512 2 жыл бұрын
What cat is that?
@AutoMotiv8ed 2 жыл бұрын
vibrant performance 200 cel
Roads Untraveled
Рет қаралды 106 М.
AutoMotiv8ed
Рет қаралды 5 М.
2varish
Рет қаралды 116 М.