Thanks! I’m still new at this though so it will take time for sure. Also they are pretty niche videos.
@ajjskins4 ай бұрын
NO NO i like that because if he gets too BIG he wont have time to answer questions, talk to us on the phone, and be to busy to have real customers and be a normal dude. He'll start selling merch and before you know it, there will be a reality show, some BRO Country singer will sponsor a build and he be walking around SEMA with an entourage. AND there goes another good guy. no more help. I took this way too far lol
@richrules4 ай бұрын
Haven’t met anyone who does as thorough of a job as Matt! Whether remote or in person he’s always got my stuff dialed in and running great!
@modelb93323 ай бұрын
Great vid - the Chopacabra is a play on the word Chupacabra - which is Spanish for “goat sucker”. It’s a cryptid animal in Texas and the American Southwest/Mexico. Most likely a coyote with mange. Now if a Louisiana shop would come out with the WampusCat Cam we’d be all set!
@andywatson-mo1jr4 ай бұрын
You did it again with another really informative video. Really like this type of video where you take your time to explain why you adjust a parameter or not to adjust a certain parameter. Thanks Matt.
@29auto304 ай бұрын
Thanks again for teaching! I used your "Burn out tune" worked great! I hope your channel keeps growing, you deserve it!
@AlejandroGonzalez-mb7luАй бұрын
Bro thank you for taking the time for all this! It came in handy subscribed!!
@svt330ci4 ай бұрын
Thanks for the great videos i learned a lot from your videos as a new tuner also my customer loves the 6l80 tune i learned from you and i fine tuned it more and it came out great also its nice to see someone share there knowledge keep up the great work and videos i know its tough in this industry i have my own shop now for almost 20 years and i keep increasing more things to offer the customers and tuning things now adays makes the engine and transmissions last longer and perform way better i hope more people find you and learn and listen to what you say and show the information you put out is spot on in my view
@mattl15764 ай бұрын
Matt. Thank you so much for doing these videos. I’ve learned so much from your content in the last couple months. Actually just bought an MPvi3 last week and already wrote the first tune to my truck. Thinking about turning this into a side hustle down the road. Much appreciated!
@Akestler4 ай бұрын
I've tuned a couple gen4 chopacabra 5.3s. I'm pretty impressed have easily they are to tune. Easy to make idle and easy to make "chop" without raping the overspeed and underspeed tables
@4xsilverado4 ай бұрын
You came through like you said would. Thanks for listening to us and making this video. This should clear up some of my questions
@andrewbolton5974 ай бұрын
I was interested when I saw your contribution to help Nate in tuning that red supercharged truck of squirrels when I saw he called you. I realized at that point dr. Tune em all was human. Subbed immediately ❤
@gearjonny3694 ай бұрын
Awesome amount of info!! This guy deserves millions of views! Thank you sir!
@joelpittman29774 ай бұрын
So glad you made a couple uploads today. Gives me something to do while I wait on a truck and trailer because I spun a bearing in my saabaru. It was a reused popped fozzy xt motor with drop pistons and reused headbolts in the vein of sloppywiki. Lasted 100k so I ain’t mad, just stranded lol. 4 years at 26 psi ain’t bad for just trying to prove a point to my coworkers lol.
@Johnny-jr2lqАй бұрын
So I plan on doing the AFM/DOD delete on my 2012 gmc Sierra. I was considering getting HP tuners before even getting my 2012 Sierra. I was planning on getting it for my 2001 Sierra. Looks like the HP Tuners program is a must have in today’s world. I wish i bought it 5 years ago maybe i wouldn’t be so nervous now.
@georgiaboy15794 ай бұрын
Thanks for all you share. I'm a transmission builder and often see the yoke leak and damage the trans
@jimmyp11454 ай бұрын
Ya cause some folks dont take regular maintenance serious
@adamscustomshop4 ай бұрын
This video is so good I feel like it should come with a link to a "KZfaq Certified Tuner" certificate. lol. No, I'm smart enough to know that I have no idea what I'm doing. I am leaving Iraq in a few days and heading home to Fort Worth and am going to get the MPVI3 to troubleshoot some 6L80 2-3 shift problems on my 2013 Sierra. Pretty sure it's mechanical but I want to check it out electrically first and after watching your videos I feel confident that I can read it and not screw it up. Thanks for all the awesome videos and take care man!
@user-de8ou7xv6e2 ай бұрын
Im learning by watching you!
@Boosted_5.34 ай бұрын
I see a video and I like it 👍 no questions asked, I’m on the path do find out what I want to do as a career and you make this career path much more possible 🙏 much love from cali.
@LynnTwinCustoms5134 ай бұрын
Always good content when you post a video! Finally making some headway on my dad’s C5. I will have to show him the part where you say we can’t smell rich or lean because he keeps saying it smells too rich at idle 😂
@jessicawatson-english55054 ай бұрын
Best tuner I have ever seen, thank you so much ❤️
@ohfugit4 ай бұрын
Great video Matt!!! The info was awesome and the pace you chose I thought was perfect.
@livingwithshelties4 ай бұрын
Thank you for the video by far very knowledgeable and we the people appreciate it
@timbo2ssrs4 ай бұрын
Great stuff! i was already gonna watch an older video today, now i don't have to.
@holeeshietpyro40724 ай бұрын
man this is what i needed! thanks man, youre the real mvp now
@MADDMERK4 ай бұрын
thank you for making these videos man! this stuff really does help us at home tuners just learning on our own stuff. im on a torque based gen4 e78 ecu so its alot more frustrating than the e38 for me to figure out how to get dialed
@Go694 ай бұрын
The coolant leak is at the "Y" connector coming right off the water pump... Run your fingers on the UNDERSIDE of the "Y" connector and when it comes back wet-you have found your leak. The trans is leaking fluid through the drive shaft yoke because the transmission has been replaced, or rebuilt, and the is now missing the output shaft SLEEVE that seals to the yoke inside the extension housing. Very easy fix but will require that the shaft come out, and extension housing be removed to install a sleeve... OR, just pull the shaft, and plug the hole in the yoke... Either way works.
@pcmfrenzy10892 ай бұрын
Just to make a correction here. Matt says in order to find the EQ ratio the math was 14.7 / 12.8 But really you don’t use 14.7, you actually make sure you use your set/commanded AFR in the tune. So if your stoich is set to 14.1, then the math would be 14.1 / 12.8 = commanded EQ. Thought I’d point this out. 👍
@monstervette854 ай бұрын
Very informative, I really appreciate all your effort. Thank you very much.
@wilsworkshop4 ай бұрын
There's an internal o-ring that basically seals the front of the driveshaft yoke, they go bad and leak into the splines, then out that weep hole. It's an easy $5 fix, just not very common knowledge that o-ring is in there.
@mlc7boosted2 ай бұрын
2:20 The truck has"243" LS cylinder heads which originally came on the 2001-2004 Corvette C5 Z06. Just an observation that it no longer has the factory "706" LS heads. So it's a little less "stock" than some might think.
@Matt_Sanford2 ай бұрын
This body style truck comes with 243/799 heads from the factory.
@mlc7boosted2 ай бұрын
@@Matt_Sanford Thanks for the info. So the truck basically has Z06 heads? That's awesome. My daily driver is an '04 C5 Vette and I noticed it has "241" heads. I do like the LS1 in it.
@ACCELGarage4 ай бұрын
Great video mate. Personally I use EFILive, but the principles are the same. Interesting approach to the base and coast spark tables which I like and will test myself. Interested to know how you came to trust the NB so much over the WB at idle/cruise?
@redlinegrizzly53494 ай бұрын
I love all the videos, I would love to sit more on the Gen 3 stuff because I know Gen 3 vs 4 is different. I was trying to tune my truck and somehow, someway. I screwed it way up. I'm not sure if i should be tuning for the MAF or VE table. I know when I start my truck, you can hear the intake pulling ALOT of air, then STFT kick in and bring them back down. However love all the videos, Keep them coming.
@Matt_Sanford4 ай бұрын
I will do more Gen 3 but the principle is the same on all of them. Get the MAF dialed and then dial in the VE. Make MAF your priority when you start the tuning process.
@redlinegrizzly53494 ай бұрын
@@Matt_Sanford I appreciate the comment back. I’m going to start over completely fresh and see what I can do. I was definitely to focus on the wideband and I noticed you didn’t pay a lot of attention to it. You was more focused on getting the MAF dialed in
@jaredjones67619 күн бұрын
@Matt_Sanford how do we get a hold of you
@livewiregto3 ай бұрын
Love the video man, very helpful
@alaskaguy43402 ай бұрын
Excellent video !
@ivancolesnic4 ай бұрын
Awesome video man
@PRZJ913 ай бұрын
I’m not unintelligent by a long shot, and I’ve tuned with other softwares before. Nothing American but man, hp tuners proves to me over and over that’s it’s overly complicated. You seem to know it extremely well but as someone that’s new to it, I don’t wanna touch it tbh. I just feel like it could be 100x simpler. There are a million tables 😂😂 I’m not gonna give up on learning it but I doubt I’ll ever actually tune something using it. I’d much rather tune a standalone system. lol great video though! 🔥
@lokedog916Ай бұрын
hey man love the videos, literally the only channel im a member of. id like to pick your brain on my tune for my btr stage 3 truck cam. followed you through your process but im at the point of needing to tune vve, im watching my stft try and pull 25-30% at idle. do you suspect a vacuum leak or does this seem roughly ok? 2013 chevy silverado 1500 lc9 5.3l gen 4 e38 pcm. ill be getting a wideband soon, just got the truck back up and running
@rmorris37224 ай бұрын
Best video Matt
@bubbafett23282 ай бұрын
I’m actually looking at doing this to my truck. It still has that AFM crap and VVT.
@nathanst.sauver62654 ай бұрын
When I make an appointment for an in person dyno/tuning session. That means you do the tuning and I get to watch?
@BrandonJones-iz6jnАй бұрын
I have a LQ nine in a square body Chevrolet. I had somebody do the wiring for me, and now I lose throttle response periodically throughout any portion of throttle usage. It may be at wide open or it could be at an Idle. I can kill all power to the system, and the throttle starts working again for how long I never know could be second it could be hours. It is, I drop my Wire system, and the pedal has two rows of pins in it.
@kylemilligan7523 ай бұрын
The transmission driveshaft yoke had a hole in it from the factory. It leaks when you overfill the trans
@demigodplays7225Ай бұрын
2016+ 4x4 trucks driveshafts are rated for 125
@Jay_Z.4 ай бұрын
Ayo, Matt, the tuning guru! Saw you Cleetus video. Much love from Texas, bro! ✌️
@wombat1784 ай бұрын
Do you have a video or can you do a video walking through a mafless tune the same as what you did here?
@ArmenArmenjs16 күн бұрын
Please link a local tune shop in Los Angels, I live in Glendale CA.
@danielhersey5676Ай бұрын
The mis fire counter says read only
@crash418992 ай бұрын
I put an aftermarket stall converter in my truck and now whenever the torque converter should lock out I get a TCC stuck off error code. Is this something in the tune I need to change or my transmission have a problem?
@GulfCoastTuningandCalibration4 ай бұрын
Matt, when it comes to using the STFT data, in the event of remote tuning or even in person where a wideband isn’t being used……..At what point is the STFT data for the ve/maf tables essentially “not good”? I would assume that when the vehicle enters OPEN LOOP that will present a problem?
@mirabalmedia3 ай бұрын
That 5.3 made a bit more than my 6.0 bored 30over, 243 heads, 50lbs injectors, long tube headers & BTR stage 2 truck cam my 6.0 made 299hp.
@pyro_cheeze7235Ай бұрын
Damn that’s low, don’t they make 260-280 stock to the wheel
@mirabalmediaАй бұрын
@@pyro_cheeze7235 A stock LQ9/6.0, it’s said that it makes 330ish hp at the crank. I made 300hp to the wheels on a Mustang Dyno. Mustang Dyno reads lower than a Dyno Jet. So on a Dyno Jet, I would probably be around 330-340hp to the wheels, not at the crank.
@chasevollbrecht8085Ай бұрын
So got a question what would you recommend as a "grunt cam" Specs 400-550 hp and torque under 5500 rpm Looking for my truck its a 14 Silverado 2500 with the 6.0 Looking for cam, spring, and pushrod package
@RichardAlfred-us8ge3 ай бұрын
How similar is truck Norris to this cam
@richardi9696Ай бұрын
Need an estimate on a tune please...
@mishutkin101Ай бұрын
If i want a remote tune with you what all do i need to get? Currently dont have hp tuners
@pcp56064 ай бұрын
Great video ,how much would somebody pay for this?
@brentlittle33053 ай бұрын
Any 10 speed love?
@jacobross982329 күн бұрын
Where can u order those headers?
@jimmyfreeze37823 ай бұрын
Does it pay to dial in the nb's after header installation to make up for the error caused by downstream relocate? Say you have nb- wb sensors that are within >2% behind a stock manifold, then after headers the nb's go way out of wack...10+ percent. In this video say the wb is correct, does that mean the truck is running ballpark 10% lean in CL or if nb are correct is PE way off?
@stebevs4 ай бұрын
When you disable LTFTs during tuning do you re-enable them once you're done? And I'm curious why you ditch them in the first place, I probably missed the explanation in a previous video.
@477racing4 ай бұрын
If I change my Stoich to E10 14.12, and I tune cruising and idle using STFT's, are the O2 sensors going to be properly targeting 14.12?
@justjackfromsc4 ай бұрын
Matt. New subscriber here. I just got a 2010 Tahoe with the 5.3 and 215k miles. I can’t stand the DOD. I’m a big Toyota guy but would not mind building the Tahoe to at least have as much or more power than my 5.7 Tundra. Any suggestions on where to start or how much of an investment it might take? I’m not naive. I know that a person can spend anywhere from a couple of grand to probably 30 or 40 grand. Just kind of looking for a starting point and some advice. Thanks.
@LegendCampbell3 ай бұрын
Do you tune after the break in cycle or during? Curious for my lt1 I'm building and I'm putting a slightly bigger cam in and not sure about running a tune during the 20 min 2k rpm break in but there in lies my question
@ajjskins4 ай бұрын
GRG has a Gen 5 EEV/MAF tunning at the same time Function....thing IDK. it tunes them both at the same time. my question is, in your function, do you use EQ Error (which as far as I can tell requires the wide band O2 to work) in your stuff? i still learning but have a bone stock truck, other than cam, and didnt want to drill a hole in the factory down pipe. is there a real way around this, and still do what your doing? If a have too, I have to, but im just curious. I have aslo been told that the tail pipe widebands have some unavodable errors in them.
@drewmurray2583Ай бұрын
Can I buy tune files from you? I am starting to get busy with swaps but I struggle to find the time to practice my tuning..
@drewmurray2583Ай бұрын
nevermind LOL nice website 😆
@sbranham864 ай бұрын
what stall you recommend for a truck norris cam in a 2000 5.3?
@motorman94 ай бұрын
Cleetus sent me
@MJL17764 ай бұрын
Would this work in a l96 6.0 as well? or no. If not could you do one of thoes trucks when u can?
@james107394 ай бұрын
I don't think i agree that even with a stock cam a converter makes it drive nicer it might be faster but i have a restalled stock converter in my stock silverado its supposed to be like 2400-2600 and its cool but a stock converter stall is better i think for most people
@Matt_Sanford4 ай бұрын
You’re allowed to have your own opinion. I prefer the way they drive with the shift points calibrated correctly. They tow better too, in my opinion.
@danr95844 ай бұрын
Can you tune an AWD Escalade?
@02riddle734 ай бұрын
Damn.. perfect timing on ur video, I'm putting the same cam in my truck tomorrow. But it's a 2015 tho. How much different is the tune compared to that year to a 2015?
@thomasgerszewski56784 ай бұрын
Probably pretty different. I got a 13 an it’s different than a 07 already. You got a 6 speed so shift points are different. An I wanna say your gen 5 now as well. So it’s definitely a different set up.
@Matt_Sanford4 ай бұрын
I have videos on Gen 5 tuning as well but some of what I’m doing in this video is the same for you but Gen 5 is more complicated for sure.
@02riddle734 ай бұрын
@Matt_Sanford o trust me I've watched them 😂. I'll be doing some recaps of the videos once the cam swap an dod delete is complete. Keep up the awesome videos man..
@GulfCoastTuningandCalibration4 ай бұрын
Matt, do you also recommend leaving LTFT disabled permanently?
@Matt_Sanford4 ай бұрын
I do personally. Anytime I’m working with a camshaft that has overlap, it just makes sense to me. It also keeps the vehicle from learning bad habits like misfires, vacuum leaks, etc.
@5off5onRFK4 ай бұрын
Have you ever tuned the TSP N/A Bald Eagle cam ? Do you think it would make good power ?
@Matt_Sanford4 ай бұрын
I have. It’s VERY similar to the power of the BTR Stage 3 LS3 cam.
@5off5onRFK4 ай бұрын
@@Matt_Sanford I appreciate the response ! Would you say this will be good in my LQ4 in a c10 ?
@Freddy_Confetti18 күн бұрын
They’ll put the word Chop on anything huh
@GulfCoastTuningandCalibration4 ай бұрын
Matt, if we are doing MAF or VE Tuning at Idle/Part Throttle do we need to disable Power Enrichment? Does it even matter? Also, Is it safe to say that all of these vehicles need to have Stoich flatlined to 14.10?
@Matt_Sanford4 ай бұрын
You don’t ever have to disable Power Enrichment. All that does is change commanded AFR/EQ Ratio and we are tuning for the error between actual and commanded so even if commanded changes during the tuning process, the actual will follow suit. Hope that makes sense. I’m not sure why the information ever got out about disabling PE. Same with DFCO, I never disable that either.
@GulfCoastTuningandCalibration4 ай бұрын
@@Matt_Sanford Thank you for the clarification! So essentially tuning for both the maf and ve tables can be done with just the stft data and the paste special + multiply function?! Seems much easier than info many including myself have payed for!
@farncoisbisson77374 ай бұрын
you do remote tune? l83 got a 6l80e with a "high stall". long tube headers and l86 ported intake/tb. my local tuner straight up told me he don't know automatics and to go to another province tuner where they run totally different gasoline. be ready for the worst gasoline you might ever have tuned... British-Columbia gasoline.. if you are up to the task id book some dyno time.
@Matt_Sanford4 ай бұрын
I do. Tuning-Tips.com
@chrismayhand79184 ай бұрын
Another great video, greatly appreciate all the info. Thank you
@coboscustoms43424 ай бұрын
Turning off the long-term fuel terms in my opinion is just the laziest way of tuning. Didn't you say yourself just a couple minutes prior to that its best to keep all of the original features working if possible" don't disable things...... I understand if you're in a scenario where belong to headers make one o2 sensor read a lot worse than the other but that's extremely rare and easily fixable. Almost every vehicle that comes to my shop that was tuned by somebody else has the fuel trim turned off and usuall it's a really basic tune that had absolutely no reason to have the fuel trims turned off. it cuts their mileage in half and causes them problems returning to idle. I can tell you've got a lot of experience doing thiso I want to know why you think it's necessary to turn off the fuel trims.
@Matt_Sanford4 ай бұрын
You are allowed to have your opinion but after doing this for 18 years, I also have to consider my customers. LTFTs learn bad habits with exhaust leaks, misfires, etc. Customers will fix the problem and then think their vehicle needs to be retuned because it still runs poorly due to learned fuel trims. Thats why I do it my way. It literally takes me 1 second to turn them back on so it isn’t a lazy thing. I don’t do basic tunes though. If you saw one of my completed tunes in full, you would see that. The only reason it would cause fuel mileage issue or issues returning to idle is if the vehicle isn’t calibrated properly. Poor tuning causes that, not LTFT being disabled.
@Matt_Sanford4 ай бұрын
Also turning off LTFT doesn’t disable closed loop fueling. It just disables learned closed loop fueling. They still have short term fuel trims that can correct as normal. I think you are thinking disabling closed loop fueling which is completely different.
@coboscustoms43424 ай бұрын
@@Matt_Sanford in a scenario where fuel quality changed, air quality, ambient temperature, dirty maf, all the absolutely normal stuff that can change makes the long terms much better to have on so that way it's not just gonna default to the values that best suited it to the environment you tuned it in every time you let off the throttle. The Ltft is what stabilizes that before the stft has to compensate.
@coboscustoms43424 ай бұрын
@@Matt_Sanford I know very much why I specified Ltft and it's defined in the prior comment. I've proven a multitude of times that fuel mileage improves having it on.
@jimmyfreeze37824 ай бұрын
If vehicle requires LTFT on then vehicle is NOT tuned
@TheShadetreemechanic392Ай бұрын
You went to fast I’m trying to learn how to tune 😂
@davidbatayias10194 ай бұрын
Don't know if you have time to respond. Im oldschool. This is new to me. I put this cam/springs and a 3000 stall in my truck. Problem is i cant find a thorough tuner like you. What can i do? Please help
@Gratitude6ixty9ine4 ай бұрын
You as a tuner what would be the best cheapo under 500 dollar plug in gas tuner
@waynebrod3698Ай бұрын
The battery, exhaust, and other basic issues should have been fixed before the cam was installed.