Unlocking Power with a Texas Speed Camshaft and DOD Delete: 2015 Chevrolet Silverado

Рет қаралды 58,314

11 ай бұрын

Hey, car enthusiasts! Today, we're taking on the task of tearing down a 2015 Chevrolet Silverado to install a Texas Speed Camshaft and DOD Delete. This modification is guaranteed to give your ride more power, speed, and performance on the road. Don't miss out - hit that play button now and let's get started!
Sit back, Enjoy, and as always let us know what you think in the comments!
If you enjoyed the video please like, subscribe, and share with your friends!
Check Us Out And Follow Us On....
www.texas-speed.com/
/ texasspeed

Пікірлер: 77

@corbinschad1 8 ай бұрын

For those that may do this, book time is 28 hours with 4wd. If you have 2wd, faster to do with engine in, but not much. Definitely pull engine on 4wd.

@AutoSteps 7 ай бұрын

pulling the engine is a waste of time lol

@rizaptor7005 3 ай бұрын

Done many Cams on these trucks/Suvs and even c7 without pulling the oil pan. Just tricks of the trade.. 😊

@bobbieprice1351 25 күн бұрын

@@rizaptor7005how ido it???

@bholden1507 5 күн бұрын

I have Z71. Never removed engine. Super simple and easy. Why remove something you don’t need to.

@tpg_sethtomerlin 11 ай бұрын

Just ordered some parts from y’all for a similar set-up on my ‘14 with l86 last week. After seeing y’all struggle, I lowered my expectations of how long it will take me to do in my driveway. Thanks for sharing

@weethee2351 9 ай бұрын

actually a pretty easy job. its just nuts and bolts. ive put cams and pull engines out of 90s- current year chevy trucks. these l83/l86 are by far give me the least amount of trouble

@AutoSteps 7 ай бұрын

little trick guys, you dont HAVE to pull the oil pan to pull the cam, just takes a little finesse with the tensioner and a screw driver

@bobbieprice1351 25 күн бұрын

What is the trick?

@AutoSteps 24 күн бұрын

@@bobbieprice1351 small screwdriver to push back the tensioner.very doable

@thesticky44 2 ай бұрын

How much does this job cost to get this job done?

@leonardotorres4662 11 ай бұрын

Duralast breaker bar for the win

@biggdude94 8 ай бұрын

What oil pump did you run with this setup?

@BuiltByLondonRacing 11 ай бұрын

Milwaukee 1/2 inch would have gotten that lower balancer bolt off 🤷🏾‍♂️

@RAWRMotorsports 9 ай бұрын

I'm doing the same exact job right now ..🎉🎉 by myself .. it's been a blessing and a curse .. 🤬 gotta put heat on that balancer bolt tho

@RAWRMotorsports 9 ай бұрын

Video will be up soon .. I ain't pulling motor

@dunnrite8299 7 ай бұрын

That chain is crazy 👀🤦🏿‍♂️😂😂😂😂🤦🏿‍♂️

@israelherrera5116 3 ай бұрын

Do these low lift retain VVT like the BTR V2 cams?

@Finallyh3r3 2 ай бұрын

Would taking out the core support not be faster than pulling the motor?

@widehips916 11 ай бұрын

Felt that Polly

@kingperfection1868 8 ай бұрын

Hell of a way to start 😂

@alvinsmith6101 11 ай бұрын

We pull the grill and radiator at our job and radiator core support.

@ritenour12 10 ай бұрын

Well it has ported heads on it too so that number isn’t just the cam

@ny-reaper-trucker 3 күн бұрын

I'd love to send my truck to you guys to do this 2016 gmc sierra with the 5.3... 4wd... how much would this cost me???

@darickpash68 4 ай бұрын

I did this to my '10 in the driveway. Have to admit this wasn't as smooth going as they expected (cracked head not their fault) but all that work for 40 hp? Id like to see the dyno charts before and after to see where it gained tq and hp throughout the rev range.

@richardcoleman9645 11 ай бұрын

Your inside. The first thing that should have come off is the hood. More room and more light. Easier on yalls back too.

@NateM13 9 ай бұрын

5.3 or 6.2?

@SI-oy7yx 5 ай бұрын

Is there a no tune cam for a 2015 4x4 5.3 silverado. RV cams for little more HP and Torque years ago. Any suggestions?

@TexasSpeedPerformance 5 ай бұрын

There is no way around tuning a vehicle when doing a cam swap. At least if swapping to something that will actually show a change in performance. That aside, your '15 truck has DOD, which needs to be eliminated and turned off in the tune in order to do a cam swap.

@SI-oy7yx 5 ай бұрын

@TexasSpeedPerformance yes sir and the plan was to eliminate it already.. So what would be a good cam that wont harm I guess a 2015 5.3 with 138k and I do understand it has to be tuned also. Thank you sir!

@papajon-1000 11 ай бұрын

@16:39 “I hope this cam doesn’t kill the converter” Lol

@bondobird 2 ай бұрын

How common is it for a head to crack?

@DaveChr 6 ай бұрын

How many miles on this truck?

@cryptoredneck8255 11 ай бұрын

I regret not getting the TSP heads when I did my cam on my 2016 Silverado.

@tyschultz6053 8 ай бұрын

Do they add a lot of power? I know the heads flow very well on these stock so i was just going to swap my 5.3 intake for the 6.2/l86 one

@davntelisha19 5 ай бұрын

Snap on mg735 will break that loose in one second lol 😂

@mountainfreestone7902 4 ай бұрын

How did the tune turn out? I did DOD and VVT delete and had it tuned. Still runs like crap. And has shutting misfire at idle. Any help would be greatly appreciated

@danielowens9934 3 ай бұрын

Different tuner next time

@ezequielrenovato6608 Ай бұрын

I seem to have the same issue. Have you found a solution?

@travieso1ruvalcaba672 10 күн бұрын

Sounds like a broken spark plug. I've seen it happen with plugs that are not for that truck (champion, Bosch ect). Clean out your mass air flow sensor, change your wires and do ACDelco o.e.m. plugs. Also replace the pvc valve

@AntonioBeltran-tv3zw 2 ай бұрын

You guys have a lift and pulled the engine? Rack n diff come out in 35 mins.

@chadwoody3719 11 ай бұрын

Kinda wondering how that setup would work on 16 Tahoe lt

@weethee2351 9 ай бұрын

same thing

@mrbrowz1000101 7 ай бұрын

You've got the afm on a Tahoe? Is it a 6.2?

@dannydanko4627 5 ай бұрын

Yall got the wrong GM head gaskets for the L86 on your site, i had to pay reverse shipping Twice.. You sent me head gaskets for the 6.6L L8T, someone linked the part numbers wrong in your system.

@patsatterfield8412 11 ай бұрын

I have a '18 Tahoe and I had my buddy install some software that eliminated the DOD. I will eventually do the same thing you guy's are doing but this software install is a great temporary fix.

@Jinkster3348 5 ай бұрын

Had my AFM disabled when I had my truck tuned. Lifter 7 still shit out!

@ElectricBlueIX 5 ай бұрын

It’s not actually a fix. The AFM lifter could still fail at any time.

@davila713 4 ай бұрын

👍👍

@drewgoody2957 2 ай бұрын

I wanna do this but stage 2 or 3 so bad but can't afford it :(

@travieso1ruvalcaba672 10 күн бұрын

I'm doing it this week. Stage two and delet kit. More because I have to do it. DOD took out my lifters and I bet my cam is gonna be compromised too so I might as well huh.

@iphone3gsdivine 9 ай бұрын

7:52 Damnnn

@360joseph360 9 ай бұрын

Not a great advertisement for texas speeds finest.......

@buildingbadazz6254 11 ай бұрын

Rear main seal leak my azz zero evidence of that😮. Good video though.

@flipposgarage 4 ай бұрын

YOU DONT HAVE TO DROP OIL PAN!!! lol I’ve done this multiple times without dropping the pan

@mattheidtke4673 11 ай бұрын

L83 or L86

@danmiles8190 4 ай бұрын

13:35 no rear main oil leak? That looks dry as a bone...

@MrWisdom79 4 ай бұрын

I agree this whole episode scared me off these dudes and I guarantee they cracked that head taking out a manifold bolt based on how inept they were trying to take out the balancer bolt.

@farncoisbisson7737 5 ай бұрын

put the parts list in the comments

@ladariusmastin 6 ай бұрын

Lmfao 😂😂😂😅

@enriqueh9467 11 ай бұрын

Should of used comp cams oe replacement lifters. All gm lifters will fail eventually.

@tyleralexander6368 11 ай бұрын

Stage 2 is more fun lol

@martinhoffman9147 4 ай бұрын

I would reconsider putting out these videos. Not looking to professional alot of extra work . Yikes.....

@thegonz7833 8 ай бұрын

Didnt do easy hood flip up.Bro forgot its an LT

@user-vd2fj4zq9v 5 ай бұрын

You guys are to funny! I can do a cam swap in 5hrs. First off why would you take the cylinder heads off if you're just doing a cam swap? All you do is pull the pushrods out stick a pen magnets in each lifter hole holding the lifters up, then slide the old cam out and new one in. Next time you wanna take a crank pulley off just put a breaker bar on it and bump the starter. Watching you guys is like watching a bunch of monkeys humping door knob! It took you guys a week to do a cam swap. 😂😂😂😂 I can't believe you posted this!!!😆😆😆😆🤣🤣🤣🤣🥴🥴🥴🥴🤤🤤🤤

@94fastford 5 ай бұрын

You have to pull the heads to swap lifters ole boy

@user-vd2fj4zq9v 5 ай бұрын

@94fastford I didn't watch the whole video, so I didn't know it had DOD, but honestly a week to do a cam and heads, don't you think that's a little excessive with four guys?

@HaydenZ06 5 ай бұрын

The title of the video is literally DOD delete…. Why would you ever half ass not swapping lifters on a Chevy any ways even if you weren’t deleting DOD. That’s the main failure point on most of these motors

@EPTRotorsports 4 ай бұрын

@user-vd2fj4zq9v you should delete the comment

@user-kc7hg9no8p 11 күн бұрын

Might wanna do your research before thinking you know what you’re talking about. To do a DOD delete on a Gen 5 the heads haft to come off to change the lifters. However the oil pan doesn’t. This isn’t an old LS3 buddy. They were all over the place tho needing 5 ppl to do a 1 man job still taking triple the time. It’s pulling the motor for me. Total waste of time just to do it on a stand. Plenty of room standing in front the engine once the rad is out lol.

@butcherbaker4258 11 ай бұрын

270hp? Holy parasitic loss there Batman. The stash is reaching redline there brother the mullet is on thing but ya gotta trim that hedge

@tpg_sethtomerlin 11 ай бұрын

@dumbolove303 11 ай бұрын

If your truck don’t give you problems like theirs did, you can get it done in a weekend. Took me 2 days to do a stage 2 in my 17 1500

@tpg_sethtomerlin 11 ай бұрын

@@dumbolove303 it’ll take me a month, minimum. Lol. About an hour at a time in between interruptions, on sundays cuz that’s the only time I have to work on it.