Great video! I just repaired my 2002 Dyson Animal using this. Slightly different, and I had to scrape off the hardened OEM glue, but everything worked perfectly! Many thanks. I was not able to repair the tear for 4 years but your video solved all that.

thank you so much, I did it, and I am a 70 year old widow lol. It was so easy to save the old hose and the trick of the warm water made it all so easy. love it

This gentleman helped us a lot with this tremendous tutorial. He basically solved our problem and our vacuum cleaner works well again.

Fantastic!👍I had been fiddling about with this for over an hour but after watching this the repair took literally 10 minutes!! Thanks so much!!

I don't even have a Dyson, but was looking for a ShopVac hose repair video...I stayed for the whole repair and I am a smarter DIY-er for it! 😁 Thank you so much for your video!! 💪🙏

Gone are the days I could spend hundreds of pounds on a vacuum. When I noticed a rip in the hose I almost cried. Didn’t have enough money for the replacement part let alone a new Dyson. And I know buying a cheap vacuum replacement would mean buying twice. Your tutorial saved me ££. Although I had to glue it back on😅,your instructions were spot on. God bless you!

Great video. Thanks. The most in-depth I found on KZfaq. Others miss the most important section. Well done

Brilliant. Thank you, saved this Yorkshire bloke a few quid 👏👏👏

THANK You…I’m up and running again with your Dyson ripped hose repair instructions. Greatly appreciated!

EXCELLENT demo! Although mine ripped at the opposite end. 😩 But it looks like a commenter below said your fix it worked on the other end as well. 👏🏽

Thanks for this video! Unfortunately I found it after buying a replacement hose, but that's ok. It wasn't very expensive and now I can fix the old one and keep it as a spare.

Thank you for sharing this video. I purchased a replacement hose and it didn't fit correctly. So your video helped a lot!

Thank you! I found this video while trying to find a new hose to order, Fixed in in less than 30 minutes!

Many thanks RManni. Your tutorial worked and saved me £30.00. Great !!!

Exactly what I needed to see. I followed your steps and everything worked out great. Thank you!!

Thank you for letting me know not to try pushing in those three black tabs! I tried for a minute and then decided to look for a video.

First class tutorial - at exactly the right time! Thanks

This helped a ton. I bought a new hose and the damn thing didn't fit.

Thanks to this video I was able to repair my DC15. Different fittings but same method.

Thank you! Simplest video I found on KZfaq to fix this issue.

Thank you, will give me a little bit more life with my current hose.

Thank you for your video. I've successfully repaired mine following your instructions.

Thanks! Easy to follow and not hard to fix. Saved me $30.

Thanks a million!!! My Dyson is repaired and working!! Much appreciated, thanks again 😊.

Thank you. It worked. I recommend this video especially versus other resources online who encourage you (wrongly) to force the tabs.

Excellent video. Just fixed mine. Easy to follow. Thank you very much 👍

Thank you! Saved me a trip and money during the pandemic!!!

Спасибо огромное. Надевала на сухую - не получалось - мучалась пол часа где-то. Спасибо за подсказку нагреть в воде

This is a very good and helpful video. I was ready to toss it in the trash. But I saw this video and fixed my vacuum in just a few minutes. Think again

Thank you very much. The hose ripping is a flaw I wish they could have solved years ago. Too much tension on the end anytime you want to use the wand.

Good tips. Going to give it a shot now. Thanks so much.

I tried to repair my dyson DC 33 hose following this & after much time, effort & further damage to the worn hose decided to get a new one with little cost from a dyson agent.😀😀😀

I fixed my ripped hose with this video, thank you very much 👍🏼

Brilliant, these instructions helped enormously. No waffle, just clear instructions. Wish I'd bothered to research fixing before buying a replacement hose. 😁 Thank you very much!!

Thank you just fixed mine saved med on buying a new hose/vacuum and saved me from injury hahaha as i try to push them with a screwdriver and it slipped abd just missed my fingers. Excellent indepth and good technique with yge warm water 👍🏾

Wait this is fixable!!!? Dude just saved us £20 on buying a replacement Would highly recommend adding some adhesive to the pipe so it doesn't come off but it's up to u

Ouch, wish I had seen this before I tried to fix. Nice job!

Great info. Thank you. Love your doggy. 💕

Excellent - thanks for this - was about to spend £30 on a new hose, but now I know I can repair it - I won’t!

Thanks. I picked up a DC41 and managed to do your fix, and also fixed the bottom that was leaking as well, using a similar method. That was much more difficult to do, but it is possible. Thanks again :)

Worked great, thank you! I added some crazy glue at the receptacle just because I had some.

What a relief! I can get back to cleaning LOL. Thanks for the lesson

Thanks .Very helpful video .It helped me takeout a coin stuck in vaccum pipe.

Perfect! Great video gave me the info to make the repair in about 15 minutes. I see your dog did get the screwdriver, I have several screwdrivers with the same K9 customization.

Thanks Really helpful video took you 5 minutes but took me an eternity to get it done but got it done.

Brilliant! Thank you so much for sharing - it's worked a treat and vacuum cleaner doing its job properly again. 🙂

Thanks saved me some time and money !!

Thanks! Fixed mine. Appreciate the help.

Excellent I’m doing that to mine right now thank you for the great tutorial

Perfect video. Thank you. I’m off to repair my animal 2 hose.

Thank you for this. I’ll give a try.

Thanks you so much! You helped me so much!! Very grateful!

Well done partner

Excellent video! Thank you sir!

Brilliant instructions, thank you very much

Followed this exactly. Thanks saved £40+

Thanks so much 👍 fixed mine

Thanks, great video!

Thank you. I've just fixed mine. :-)

Thanks mate, top tip!

Very helpful video. Thank you.

you saved my life, thank you

Cheers mate. Warm water works a treat 👍

Thank you. Dog definitely chewed your screwdriver 👍

Thanks man... saved me $30

Cheers fella just sorted mine thanks

Just fixed my DC04 thank you

Awesome! Very helpful!

Most impressive. Grateful.

Thanks for this video!

Thanks so much, you saved me a few £

Many thanks for your help

Thanks for your help

Thank you so much.Job done 😃😃😃

Thank you. We saved by fixing ours too!

Fab, hose sorted 🤩

Thank you really helped

Very helpful thank you!

thank you! this helps

Great repair video 👍🏻👍🏻 Though my issue is the other end...🙄😔

😊 thank you. I'm a "if I can learn how to fix things, I WILL!"

Thanks… big help :)

Good to see! I still would have cleaned the hose while it was apart and let it thoroughly dry before refitting. And of course the whole thing should be allowed to completely dry out before putting it back on the vacuum cleaner.

Thanks so much. I will go and operate on my DC 42

Many thanks.

Thank you, thank you, thank you!!!

Thank you so much!

Excellent!

worked, thanks

AmaxI’m my absolutely the best nstruxtuons and I even had the little Lego bits around as well! 😂

Thanks!

Thanks but how did you release the hose from the machine? Great diy repair

Genius

Thanks

Thank you. No my dog didn’t do it. 🤣. Don’t do this do not do this of course that’s the first thing I was doing

Order one. It’s cheap.

You didn’t glue it it’s gonna come on down again you can’t be that cheap they’re only 26 bucks on Amazon

Thanks so much, you saved me a few £