Dyson V7 / V8 disassembly and cleaning tutorial.

Рет қаралды 163,699

Жыл бұрын

Is your Dyson pulsating, loosing suction or does it smell terrible?
In this video I show you how to deep clean your Dyson V7 and V8.
If you have any questions or comments, feel free to drop them in the comments! Enjoy!
→If you don't want to miss a video or if you want to support the channel consider subscribing.
→Instagram: / spare_time_. .
→As an Amazon Associate I earn from qualifying purchases.
Tools I used:
-iFixit Pro Tech Toolkit: amzn.to/3X92AFk
-Isopropanolalcohol (IPA) amzn.to/3kovZg2
-Canned air amzn.to/3kcgPKU
-Contact cleaner
-Q-tips
Parts:
- Pre filter amzn.to/3Hcwfrq
Recorded with:
-Canon 4000D: amzn.to/3ZxNSt2

Пікірлер: 132

@thomaswall4648 7 ай бұрын

The way that you just showed everyone how to do the job without a single word of unnecessary waffle... Everybody here salutes you

@boomergotu9758 4 ай бұрын

Excellent. No 60 minutes of talking nonsense just getting down to it. Love it. Thank you. Saved to my bookmarks for easy reference.

@51marathoner 6 ай бұрын

Just finished disassembling and cleaning my V8. I only had one little issue which I think I resolved, however my Dyson now has a slight whistle ;) which not only doesn't bother me but brings a smile to my face. I'm pretty proud of myself for taking the whole thing apart and putting it back together again. Thank you for your excellent tutorial!

@AniVerseChannel 3 ай бұрын

Disassembly with no talking 10/10 And ASSEMBLY 🫨 20/10

@greganderson3408 3 ай бұрын

I will also add my support for NO useless talking. Well done. Love your channel

@SpareTimeWorkshop 3 ай бұрын

Thank you, glad u like it!

@niinofuruhata8016 7 ай бұрын

Thank you so much. This was not only informative but therapeutic.

@marybeaumont329 4 ай бұрын

Best video - incredibly useful. Thank you for taking the time to show how it's done. So very helpful and straight to the point.

@bangosdemangos416 3 ай бұрын

Excellent - a fine example of how such videos should be done. A splendid resource for people like me who can’t trust anything until they’ve taken it to bits . . . 😂

@sandraplonka5225 5 ай бұрын

Thank you . And loved that you didn’t say a thing just showed how to do it. Yeah!!!

@aj7aj Ай бұрын

I'm excellent video and I think you've encouraged me to buy a different make that doesn't mean that much work

@chorcor888 24 күн бұрын

I dropped my v8 and it twisted the cylinder bit in a funny angle. This video helped me correct it so thank you!

@trmcloughlin 3 ай бұрын

Thanks! I had a problem reaching the 4 T8s. In the cyclone head. The bit was too short and the handle too wide. Then I saw you put the screws into the lid of the same I fix it kit I have. So I went back and noticed you used a hex bit as an extender! Brilliant video!

@sergeypetrov9082 7 ай бұрын

One of the best and helpful video I ever seen!!! Did everything, work perfect 👍🏻 thank u!!! 🎉

@aroda55 7 ай бұрын

Excellent instructions without words!❤

@daftstuff6406 11 ай бұрын

thanks for taking the time to share this how to. very useful for short and long term maintenance.

@SpareTimeWorkshop 11 ай бұрын

You're welcome, thanks for leaving a comment

@MichaelM-tt5wd Жыл бұрын

"Staying in one piece" is not the problem, but if cheap plastics are used there is a risk of deformation. Anyway I tested it yesterday and ALL parts are perfectly fine and therefore dishwasher safe @ 65°C. Of course the two red & black gaskets made out of foam should be cleaned manually. There is just one rubber seal you missed to remove and show in your video. It is mounted on the plastic part opposite to the round metal filter. I also removed the red rubber seal on the dust container by removing two T10 Torx screws. There was alot of gunk around that seal. The black rubber seal on the container cover can also be removed. All these rubber seals should be cleaned with special rubber care spray that keeps the rubber soft and elastic. In the end I want to thank you for your helpful video.

@SpareTimeWorkshop Жыл бұрын

Thanks for the feedback. Good tips. I didn't know those seals come off easily. I will give it a try next time. Thanks for the feedback.

@user-iv7gf6yd7q 7 ай бұрын

Спасибо вам за информацию! А спрей для резины в каких магазинах продается, а то на улице мороз, чтобы разъезжать по всем. А пылесос чистить приспичило сейчас😳

@aLatios 7 ай бұрын

Dishwasher safe? Is there any concern about corroding the electrical terminals?

@MichaelM-tt5wd 7 ай бұрын

@@aLatios Of course we were discussing the disassembled plastic components only !

@aLatios 7 ай бұрын

@@MichaelM-tt5wd yes. I seem to remember that a lot of the plastic components do still have the electrical terminals in them so that the brush gets power.

@m.edwardburton6247 6 ай бұрын

Fabulous video! The only one I've found for the model and type Dyson vac that I have. The rest of the videos I've seen are silly compared to yours. I haven't needed to do a complete break down - deep cleaning as of yet but if I ever do I'll be back to watch this video and any others you have. Very fine video indeed. Thank you!

@SpareTimeWorkshop 6 ай бұрын

Thank you very much for leaving a comment. 👍Thanks for the kind words.

@pooyan9810 Ай бұрын

我的Dyson v7 好像死機啦，不工作啦。😂。昨天跟著你的video 清拆洗了整個機，今天非常好用，跟新的一樣，🙏🙏🙏。

@Labyrinth1010 7 ай бұрын

Wow. So helpful, thank you!

@harrymayer-singh1432 6 ай бұрын

Cheers bro, just saved me buying a new one

@audreyorgan8793 5 ай бұрын

Beyond helpful. Many thanks 🙏🏻

@TheRealMexiBarbie 2 ай бұрын

Thank you so much!!! This was super helpful, cheers!!

@qaisersaeed8753 8 ай бұрын

Excellent video - thanks

@Nicksbf109 6 ай бұрын

Best tutorial ever, now i know.

@SpareTimeWorkshop 6 ай бұрын

Thank you 👍

@Blarisa 4 ай бұрын

Absolutely brilliant. Thank you

@dalesdipstick 7 ай бұрын

Cheers mate really appreciated your video gave absolutely crystal clear instructions 5⭐️

@SpareTimeWorkshop 7 ай бұрын

Thank you Bruce. Thanks for your comment.

@hawkboy000 4 ай бұрын

Perfect video! Thank you so much

@2525fftt 3 ай бұрын

Большое спасибо. Я все почистил как Вы. Грязи ужас. Спасибо. Вы супер. 👍👍❤❤

@eduardolab 7 ай бұрын

Gracias , excelente video !!

@juancarloslopezperales8751 9 сағат бұрын

Muy bien explicado, excelente video

@jackspence625 4 ай бұрын

Thanks. that was a big help!

@NamDinh-nf7pm 4 ай бұрын

Very useful, thank you so much

@petecoo1978 11 ай бұрын

Super vid, how to clean your dyson but also doubles as an asmr vid 😊

@SpareTimeWorkshop 11 ай бұрын

Haha tnx, I hope you enjoyed it.

@hamidbehrouz3355 6 ай бұрын

Thanks alot for your help.

@StephyGrowsWeed 10 ай бұрын

Thank you so so so so so so much from germany. I ve disassembled it, washed it and now waiting for the parts to fully dry. I was shocked about how much gunk there was inside the cyclone parts 😮😮😮😮 🤮

@SpareTimeWorkshop 9 ай бұрын

You're welcome, they do indeed get pretty dirty inside.

@user-iv7gf6yd7q 7 ай бұрын

@@SpareTimeWorkshopтоже собралась , почистить пылесос, а собрать , наверное будет труднее, чем разобрать. У меня так с сушилкой Изидри получилось, собрать обратно тяжелее, немного не так собрала, хотя раз 8-9 собирала вновь и все равно часть одна немного выступает

@RCOSKUN84 4 ай бұрын

Great jobs. Thanks

@SOLO-mk4fj 2 ай бұрын

merci pour ces explications

@heinzhatzen9689 9 ай бұрын

Excellent video, thanks.

@SpareTimeWorkshop 9 ай бұрын

Thank you very much

@anthonyocarroll5630 5 ай бұрын

Very very clear how to do

@user-es3ve9qp2k 6 ай бұрын

Really lovely video! It would be helpful if you could list the exact tool sizes needed in the description as I had the same issue as another viewer where I didn’t realize I needed smaller than I had! I appreciate the link for a toolkit though, very helpful. Thank you!

@laurashemy 13 күн бұрын

I Love the video. I did everything about cleaning before assembling everything together I had to pause the project a few weeks ago and when I was putting everything together I noticed someone put the screws on the trash... is there any chance you can tell me which screws I need to buy?

@beccie_414 7 ай бұрын

Nice! Thank you for this video

@SpareTimeWorkshop 7 ай бұрын

You're welcome Beccie.

@alitiryaki871 3 ай бұрын

Very very thank you 🙏🙏

@juppvorb5840 10 ай бұрын

Perfect! Thanks!

@SpareTimeWorkshop 10 ай бұрын

You're welcome.👍thanks for watching.

@j.johnson3409 9 ай бұрын

Thank you sooo much for the in-depth video. I swear my Dyson vacuum will last years longer due to cleaning all the parts of the vacuum. Thank you - thank you!

@SpareTimeWorkshop 9 ай бұрын

You're welcome, I hope you enjoy it for a long time to come. Thanks for leaving a comment. 👍

@cwr6960 10 ай бұрын

I didn't destroy anything. Awesome tutorial!

@SpareTimeWorkshop 10 ай бұрын

Thank you. Haha nice that everything is still in one piece.

@rokus5303 3 ай бұрын

Thank you❤

@andyt5007 3 ай бұрын

Only video I can find which explains how to remove the rear casing to clean motor filter. Sadly hasnt fixed my issue of not working in max mode. But great video anyway.

@SpareTimeWorkshop 3 ай бұрын

Thank you, what happens if you use you're dyson in max mode? Pulsing or does it stop and flash a blue light on the battery?

@andyt5007 3 ай бұрын

@SpareTimeWorkshop it just cut out. And doesn't work at all.

@SpareTimeWorkshop 3 ай бұрын

@@andyt5007 OK, I guess battery needs replacement then.

@linadiclemente3101 5 ай бұрын

So I rinse water through the cylinder thing once a week. Probably not a good idea?

@kennethparry6483 4 ай бұрын

fabulous

@MOONSIP2 5 ай бұрын

Excellent demonstration. The post filter is a bit different on the V8.

@SpareTimeWorkshop 5 ай бұрын

I don't think every v8 has a removable post filter, but I'm not sure. The biggest difference between the v7 and v8 is the battery. The v8 uses different cells. 20700 instead of 18650.

@nomadchad8243 Ай бұрын

Ahhh, I had the cone shaped thing upside down and it would suck dirt straight under the white jets . Had it like that for a year .

@Jeram_JJF 5 ай бұрын

Is there anywhere I can get those two gaskets (red and black) online? I have checked amazon and they have some but it doesn't look the same.

@robjulianmaghinang6406 Ай бұрын

Can you just dunk the cyclone in soapy water? I don't think I have that much time to disassemble everything

@radlinx4448 4 ай бұрын

Thanks!

@SpareTimeWorkshop 4 ай бұрын

Thank you very much

@Kharpern22 Ай бұрын

I'm having one problem even though the video is excellent and I'm using the same toolkit. I can't get the screwdriver in far enough to tighten the long T8 screws. The extender doesn't fit in at all. I have the V7. Any tips?

@SpareTimeWorkshop Ай бұрын

I had the same problem. I had used a small socket from the set where your bit fits. And stuck it in with a piece of glove so the bit wouldn't fall out. Not the prettiest way. But it works

@Jindsing 2 ай бұрын

After how many years of use is this buildup from?

@user-su4fb8kp1i 11 ай бұрын

Having a terrible time getting the cyclone to come off. Seems the two red rods that go into the channel are stuck and so hard to get in and out. Also when trying to pull up on the little red handle to discard contents, it is so hard to pull up and down. Any thoughts would be greatly appreciated

@allin3808 6 ай бұрын

Try lubricating both with some wd-40, that thing does wonders

@umpus Ай бұрын

Here's hoping this fixes the pulsing issue... waiting for everything to dry so I can put it back together 😅

@balkanleopard9728 11 ай бұрын

Excellent video - except I'd add a bit about really cleaning the flap valve. This is a mojor area of blockage for me - and it's really difficult to clean. Well done.

@SpareTimeWorkshop 11 ай бұрын

Thank you. Cleaning that valve is indeed a hassle. I don't have a handy way to do it either. I've also been fiddling with it for a while with cotton swabs and wipes. Many things I have to shorten because otherwise it becomes a very long video.

@user-iv7gf6yd7q 7 ай бұрын

А где эта заслонка находится? Для меня это темный лес , разборка, а потом сборка пылесоса. Уже задумалась: смогу ли обратно его собрать правильно?

@HD74189 7 ай бұрын

I reassembled it as you showed but it is heavy to close it and the led won’t close well 😢 any suggestions please

@SpareTimeWorkshop 7 ай бұрын

14:14 This part is probably not quite in place.

@AngelaLowell-Schade 6 ай бұрын

I started disassembly but was annoyed to see that the smallest Torx I have is a 10...so now I need to go to the store 😩

@Adamhazie 8 ай бұрын

would there be risk in just dunking the entire cyclone assembly in hot water for a couple of hours with dish soap and then letting dry for 24-48 hours?

@SpareTimeWorkshop 8 ай бұрын

I think the chances of water being left behind in it are high.

@thomas.69 9 ай бұрын

I need a dust filter for a Hoover Max Extract® 60 Pressure Pro™

@SpareTimeWorkshop 9 ай бұрын

Ok. I can't help you with that, unfortunately. Have you already looked on amazon?

@thomas.69 9 ай бұрын

@@SpareTimeWorkshop it's the dissappear man code words from breaking bad xx

@SpareTimeWorkshop 9 ай бұрын

@@thomas.69 Haha, I didn't know that. I didn't watch that one.

@MOONSIP2 5 ай бұрын

🤣🤣🤣🤣

@user-hz7by5ug5h 5 ай бұрын

👍

@slavicwifey 3 ай бұрын

hi! which screwer size it is?

@SpareTimeWorkshop 3 ай бұрын

If I remember correctly, the screws are torx T8 or T10. In the video I include the screw sizes.

@AbidAli-xy2sz 5 ай бұрын

I didn't realise how many part's went into this tiny thing 😮

@kathleencalvert1919 8 ай бұрын

I think I would buy a new one before I attempted all of this !!!

@user-iv7gf6yd7q 7 ай бұрын

Мне тоже страшно. Но попытаюсь разобрать, а собирать уж, не знаю как получится😮

@HamzaZaid42 Жыл бұрын

Make a video on ps4 slim

@SpareTimeWorkshop Жыл бұрын

don't own a ps4 slim. And I would like to make more dyson movies first.

@markrichardson1171 6 ай бұрын

followed all and still does the same thing Grrrrrrrrrrrrrrrrrrrrr

@SpareTimeWorkshop 6 ай бұрын

That is indeed annoying, what kind of malfunction does your Dyson have?

@kaptainnipples 7 ай бұрын

I just know if I went to that level it wouldn’t be working when I put it back together

@kaptainnipples 7 ай бұрын

Unfortunately the only way I feel like I can remove the dog smell from the hoover is to deep clean the intricate vent bit

@Chinellaleon 7 ай бұрын

Bro thanks for the video but just buy a Henry hoover it’s the best

@SpareTimeWorkshop 7 ай бұрын

Haha Henry hoover is very cool. But I still have to say I go for the Dyson. I personally use a V8 with an upgraded battery.

@user-iv7gf6yd7q 7 ай бұрын

@@SpareTimeWorkshopу меня тоже Дайсон v8 и мне страшновато его разбирать, но придется, вижу, что пыли накопилось много и он быстро устает уже, когда работает.

@MichaelM-tt5wd Жыл бұрын

Is it stupid to put all the plastic parts except for the gaskets into the dishwasher ?

@SpareTimeWorkshop Жыл бұрын

don't think those parts survive the dishwasher. I would wash it by hand just to be sure.

@MichaelM-tt5wd Жыл бұрын

@@SpareTimeWorkshop I'll give it a try @ 60°C and keep you posted . . .

@SpareTimeWorkshop Жыл бұрын

@@MichaelM-tt5wd Okay super, I'm very curious. I hope everything stays in one piece.

@user-iv7gf6yd7q 7 ай бұрын

@@SpareTimeWorkshopтоже думаю, что все детали надо промыть вручную, не так уж их много

@KalBaba-ek8vj Ай бұрын

Don't take it a part. Just hose it really good inside and let it dry ,work for me .Good luck

@SpareTimeWorkshop Ай бұрын

The danger here of cleaning this way is that if any water remains in your cyclone. There is a chance that your motor will short out. In addition, the vacuum cleaner also becomes less clean than if you take it apart.