E220 CDI Mercedes w210 Intake Manifold Removal , Gasket Replacement , Swirl Flaps , Runners Cleaning

Рет қаралды 74,475

4 жыл бұрын

Playlist with more videos :
• E220 CDI Mercedes w210...
On this car you will find the intake manifold with Runners which will divert the air accordingly in order to get better efficiency and a maximum boost from the turbo . The also called Swirl Flaps, therefore, are a very important component which once it fails , the engine might run very rough or even won't start at all ( if the runners got stuck in a close position )
engine : om646
Disclaimer :
This youtube channel: "doit_vehicles " can not guarantee that this information suits your car . "doit_vehicles " assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk .

Пікірлер: 75

@doit_vehicles 2 жыл бұрын

W210 ABS motor Test : kzfaq.info/get/bejne/ntiTZamXyNSck6c.html

@barryduniec3274 2 жыл бұрын

Thank you so much for making this video. I would not have the courage to do this job without you.

@Wuuz 2 жыл бұрын

thanks so much for these videos!, they truely increase my confidence levels to fix my car.

@andrzejtts2965 2 жыл бұрын

Wspaniały materiał , opis jasny i rzeczowy. pozdrawiam

@vitorsimoes1172 3 ай бұрын

Great work. Thank you.

@tdraper7 2 жыл бұрын

Yep! Perfect tutorial! Thanks for doing this !

@2008davidvieira 2 жыл бұрын

Thank man, this was very useful!

@armandh9287 3 жыл бұрын

Excellent video! Good job and very well explained. Thank you.

@doit_vehicles 3 жыл бұрын

Glad it was helpful!

@joseseabra8056 Жыл бұрын

Vídeos muito esclarecedores, demonstrando o seu profissionalismo, Obrigado.

@ErnestShack 4 жыл бұрын

Nice video as always

@doit_vehicles 4 жыл бұрын

Thanks!

@georgekrivosic5094 3 жыл бұрын

I hope it is the same procedure on my W210 320 CDI, thanks for taking the time to make this video

@doit_vehicles 3 жыл бұрын

It's the same

@serolunarrosa 4 жыл бұрын

Thank you, for good video!!! more video with mercedes, interested how to change the chain at this engine.

@samika1234 3 жыл бұрын

Thank you

@theotvt5024 3 жыл бұрын

MERCI beaucoup

@dehoffe 3 жыл бұрын

nice videos, thank you

@doit_vehicles 3 жыл бұрын

You're welcome

@cherifcherif7748 3 жыл бұрын

Thanks 👍🙏

@mihaibaltag2648 3 жыл бұрын

Thank you, OM646 is almost nonexistent on YT

@Kuikuuu 3 жыл бұрын

Its an Om611 tho.

@meerkat3899 3 жыл бұрын

@@Kuikuuu that's right, the om611 is the one shown in the video whereas the om646 has a different shape engine cover and other things too

@kostagg2108 2 жыл бұрын

Thanks

@freemindas 2 жыл бұрын

Very intimidating. I don't think I will ever be able to do this type of work. I can't remember how to put everything back together and I am too afraid of breaking anything there !

@RolfOEngebretsen 3 жыл бұрын

Very good video, but what is the torqe on the intake manifold bolts

@constantinzamfir6233 3 жыл бұрын

Very good video explaining how to do multiple things . I just got an W211 , after many hesitations but i’m not sorry now. It has 600.000 km and i need to get my hands dirty in order to keep it running for some time.

@doit_vehicles 3 жыл бұрын

600 k , thats a nice veteran , congrats!

@constantinzamfir6233 3 жыл бұрын

Yeah, i know it’s old but I really like the model and the car looks pretty good with all the maintenance done at Mercedes

@vadmalski Жыл бұрын

yes!

@szenasitibor5063 3 жыл бұрын

Super video The intake manifold must also be removed to replace the engine oil cooler

@barryduniec3274 2 жыл бұрын

Yes sadly enough. Much work for getting to the oil cooler

@r9cheverny433 3 жыл бұрын

12:12 what is the torque specification for that? 16NM?

@user-qv8xq8km6h Жыл бұрын

Hi, what is the cause of the oil leak under the thermostat of 8:00 minute ?

@demoyoutuber7664 10 ай бұрын

Can You show about exhaust manifold?

@deinvater7755 2 жыл бұрын

❤❤❤❤❤

@mikaidro6868 3 ай бұрын

My m55 stays on, I left the engine on, it leaves it on, when I drive for a while it cancels, it gives error 2359-1, turbo, new pipes, new capteur, I couldn't find the new one, why does it cancel, there is no other error.

@fayazhassam3285 3 жыл бұрын

Thank you very much for the video and explanation, am having a problem with the small motor for the flaps( my apologies I don't know the teachnical name). When I put the ignition on it makes a weird noise, even when start the engine, it keeps on making the noise. When I switch the engine off it makes the weird noise for a few seconds then it stops. Once again thanks a lot for the video I know what to expect while dismounting it. Cheers.

@doit_vehicles 3 жыл бұрын

first is worth checking if the sounds come indeed from the intake runner control valve . Than test it . It's normal to be energized before the start up but while the engine is idling it should not be energized , so check for power at that moment at the connector .

@r9cheverny433 3 жыл бұрын

heeey i have that problem too, and when i am accelerate i dont have boost over 2300 rpms!

@AreskCSGO 2 жыл бұрын

Man could the engine stop when accelerating a bit because of the sensor of the oil pressure? I think i didnt put some sensors under the engine and my engine stops now lol

@nicolaegeorge9259 3 жыл бұрын

👍👍👍

@AreskCSGO 2 жыл бұрын

This is harder than it looks , sadly i already removed many things to stop now hahah

@mercedesbenzw2119 Жыл бұрын

0:51 why did you cut intake hose?

@r9cheverny433 3 жыл бұрын

yea this is all ok but you didnt show us how to remove air from the diesel lines :D

@dl94lopez 3 жыл бұрын

My friend, first of all great video. Now, I have removed the swirl flaps and cover the top holes with bolts, all tide and nicely, but a got code P1189, some said that putting a 4.7K resistor on the connector plug of the swirl motor will cheat the ECU. How can I do this if it's 3 cables plug, brown red and a kind of grey?

@druszan17 3 жыл бұрын

Im not sure i understood you . But you need the keep on the motor what moves the flaps . and you need to find a place for it where it can mooves freely .

@JoonaParhankangas 3 жыл бұрын

Just keep flap motor connected 👍

@sanane7030 3 жыл бұрын

HEllo Master! I have now the same problem with my C200 (W203) elegance. I have let to replace the manifold 2 years ago once. It was very expensive. A new genuine manifold was 900 Euro. Now I have the same problem again. So engine is in safe mode now. What I want to ask, if I do not repair and just keep it like it is, will this cause any further damage of the engine or something?

@manbiteslife3110 3 жыл бұрын

Take it out and clean it. It's diesel?

@sanane7030 3 жыл бұрын

@@manbiteslife3110 yes, it is diesel!

@brunobegic3841 2 жыл бұрын

Very nice video. I'm experiencing some black smoke myself with my om611 when I start accelerating from a standstill. No error codes, cleaned up the egr last year but the smoke is still present. I feel like one (or more) of my swirl flaps have clogged up since I literally checked everything else and it's fine. I want to hear your opinion. Cheers.

@freemindas Жыл бұрын

Did you figure it out ?

@brunobegic3841 Жыл бұрын

@@freemindas Yep. Swirl flaps were clogged up just as I thought. Just cleaned them up nicely and the car now runs silky smooth. Doesn't even feel like a diesel sometimes.

@freemindas Жыл бұрын

@@brunobegic3841 swirl flaps are located in the intake manifold right ?

@brunobegic3841 Жыл бұрын

@@freemindas yep

@mbz4652 2 жыл бұрын

How to prevent the intake manifold from clogging up other than long distance driving? I heard that driving the car high in revs doesn't affect the amount of carbon build up in the intake, and doesn't clean the intake. So what could prevent the intake from carbon build up?

@doit_vehicles 2 жыл бұрын

Installing an oil catch can on the PCV system also the EGR valve should not be stuck open

@skycrusher9516 2 ай бұрын

hello bro can u do a video how to remove crankcase on mercedez e220 w210 i need it so much i dont know how to remove it on my car its broken i need to fix it

@skycrusher9516 2 ай бұрын

crankcase for the oil its under the car

@mbz4652 2 жыл бұрын

Can a clogged up intake manifold cause limp mode and the 3000 rpm problem on this engine? What are other causes of limp mode? And can you clean the intake manifold without removing it by using engine and oil additives for example?

@besianqorri7468 Жыл бұрын

Yes it does happen , the main problem is the carbon that blocks intake manifold flaps and that causes the limp mode , additives are not going to help if you do not remove the intake manifold and clean it manualy .

@djb-air9582 Жыл бұрын

Yes the shut off motor does it.

@IphoneSA 3 жыл бұрын

I have problem.lost power engine can you help ?

@doit_vehicles 3 жыл бұрын

There can be a lot of issues causing this .. impossible to guess

@johnarnekristiansen3435 2 жыл бұрын

I have done this Job with KZfaq in back ground.. Tok me 5 hours😂😂😂

@doit_vehicles 2 жыл бұрын

Good job 👏

@velidvelid579 11 ай бұрын

Dalibimi mogli rec zbog ceg bacami crni dim mjenjo ager ventil dizne i opet isto kada otpojim sa Ager ventila nebaca crni dim i nabijami pritisak u motor mercedes c 220 cdi 2002 godiste