Swirl Flaps Delete Mercedes 270CDI OM612 W163 W210 W203

Рет қаралды 48,967

f0llower

Күн бұрын

How to delete intake manofold's Swirl Flaps from 270CDI

Пікірлер: 35

@anfo9474 Жыл бұрын

Great video, thanks for taking the time to list required parts. Fuel cooler delete video would be interesting also.

@f0llower Жыл бұрын

Thanks. I will make one.

@ranat5526 Жыл бұрын

I heated the bolts with a blow torch and then twisted them into position without having to tap the hole. Trick is to heat the bolt and then screw turn into position and immediately screw turn out using cold water to cool the area.

@martinhristov6429 Ай бұрын

bless you friend you saved me 200 eur

@BornHustler777 10 ай бұрын

Any faults or issues after deleting them ?

@niklausmhmk2957 2 жыл бұрын

Thanks for the video ...what bolt did you used is it M14 bolt or what kind is it ??

@f0llower 2 жыл бұрын

Hey man, it's noted in the very beginning, I've used M14 20mm long

@marjalone1 7 ай бұрын

asparagus thickness m14 ?@@f0llower

@MarkoVukovic0 Жыл бұрын

What's the purpose of these damn flaps in the first place?

@djordjemisic6202 8 ай бұрын

I did it on the om646 w203 2003, but the car still doesn't start, the engine is connected, the check lamp is not there, but there is a valve error, do I need to software solve the valves, I think I should turn them off?

@WanderingShadow100 Жыл бұрын

Hi f0llower..Superb video that you did... Would you please do a video for EGR deletion for ML270 ? Thanks in advance.

@f0llower Жыл бұрын

Thanks for the feedback. Yes I'll do.

@davidut55 Жыл бұрын

What about the actuator? Does it generate fault code for movement without the flaps?

@f0llower Жыл бұрын

No, keep it connected and it's fine.

@o.ko.k7550 Жыл бұрын

THANK YOU BUT ONLY THIS IS HARDWARE YOU DELETE AND WHAT ABOUT SOFTWARE EGR OFF ?? HOW DID YOU DO IT PLEASE BECAUSE IN MOST CARS ITS NOT WORKS ONLY HARDWARE DELETE FLAPS

@f0llower Жыл бұрын

It is not needed to edit software as long as you keep servo motor connected.

@o.ko.k7550 Жыл бұрын

@@f0llower Thank you so much bro

@FENNECTHINKS Жыл бұрын

Hello super top video I would like to know what is the point of making this modification and if I can do it on my clk 270 cdi w209 auto box. thank you in advance good luck have a nice day

@f0llower Жыл бұрын

Those plastic flaps are brittle and it's pressure and oil leaking point. So you can get black smoke, slow acceleration and in worst case scenario they could break off and cause serious engine damage. So definitely worth doing.

@ferch4846 2 жыл бұрын

Thanks for the video... do you know if the 270 xdi installed in the 2012ssangyong Rexton built under license from Mercedes, will have the same flaps? what could be the symptoms thanks.

@f0llower 2 жыл бұрын

Take off engine cover and you will see on the right side of engine, if it's same

@leonvdm Жыл бұрын

symptoms is rich running (lots of smoke), oil soaked left hand side of engine-block, and limp home mode, do this and erg shunt and you will have lots of power again and far better milage