E36 Cooling System Rebuild DIY

No video

E36 Cooling System Rebuild DIY

Рет қаралды 40,530

5 жыл бұрын

used ECS's level 1 refresh kit and a new Radiator.
Channel Merch! m3nacebuildcre...
follow me:
instagram: / quinnmclark
outro song: / jo-cohen-sex-whales-we...

Пікірлер: 93

@rxsevinn Ай бұрын

Till this day...these videos are still helping the e36 community. Thank you for you service Quinn!

@wolfgvming5855 4 жыл бұрын

You deserve more subs! I just got a 97 328i sedan. And you've helped me do a lot of work that needs to be done for the car to be reliable. Thank you

@M3NACE 4 жыл бұрын

ill get there man! thanks! good to hear that thing is getting back to proper condition, good work man!

@prolosertheatomistic8101 Жыл бұрын

Old video but this has been a life saver. Great to see it so clearly taken apart.

@marquesmcmillan283 5 жыл бұрын

Very thorough video on a very important subject. I definitely had cooling system issues over the 20+ years my family has owned my e36. I’ve had radiators pop, a fan clutch explode (terrifying), hoses burst, etc. I finally fully sorted my cooling system back when I did the head gasket with all new silicone hoses, upgraded water pump, etc.

@MrBellyman128 2 жыл бұрын

Did it still give you issues after you upgraded everything?

@marquesmcmillan283 2 жыл бұрын

@@MrBellyman128 no, not yet 🤞 I have auto crossed it several times (see my videos) in the Georgia summer heat without any problems. However, I don’t daily it like I used to.

@Namesi 5 жыл бұрын

This might be your best work - a true DIY. Thanks man!

@M3NACE 5 жыл бұрын

thank you! good to know I still got it. lol

@BadPandaRacing 3 жыл бұрын

Id say the trans swapping is best i love that playlist lol i watch it like a anime series 😆 gtta ALWAYS re watch it imprint that in my brain for later 😎😎😎

@andrepereira2209 5 жыл бұрын

Was planning on doing a cooling system rebuild after completing my auto to 5spd swap watching your vids. Finished the swap last week all went well and now you upload this video. Thanks man!

@M3NACE 5 жыл бұрын

yew! ive been babysitting this video for a while, too lazy to edit it. thought it was about time.

@Zac_LDN 3 жыл бұрын

This is a very detailed video - valuable tips! You deserve much more likes and subs. Thanks for this!

@danielwatts9803 3 жыл бұрын

no all aluminum radiator, no metal fan shroud w/ electric SPAL fan, no metal expansion tank & no Stewart water pump. Summer is right around the corner = You're a brave man!

@M3NACE 3 жыл бұрын

This car is low mileage, bone stock, and wanted to be kept that way.lol

@rue2973 Жыл бұрын

The aluminum radiators believe it or not don't hold up nearly as long as OE. In specific Mishimoto radiators you're lucky to get 2 years of driving out of if you really drive the car to its limit. The plastic housing for radiators much like everything else in a bmw will outlast aluminum radiators. And that's saying something.

@jakecarlson2437 3 жыл бұрын

doing my cooling system right now on my 97' M3. great video! thanks man!

@frankhernandez5273 5 жыл бұрын

Love the video format, seems like it would have taken a lot of time and effort to put it together. Thank you!!!

@anik321 3 жыл бұрын

This.

@DomsE36Garage 5 жыл бұрын

Great job filming that tedious task as usual 👌 Looking forward to the next video, I'm a couple of weeks off bleeding my boosted e36 cooling system so will be super useful to see the correct process

@M3NACE 5 жыл бұрын

bleed vid is dropping tomorrow!

@DomsE36Garage 5 жыл бұрын

@@M3NACE perfect bud

@nesnas 3 жыл бұрын

Easily the best DIY video I've seen! Truly impressive how you can have such professional and clear video footage during this fairly involved procedure. For a simple coolant flush, is it sufficient to drain the radiator and the engine block (of course with the expansion tank cap off)? Or do I need to disassemble more components?

@M3NACE 3 жыл бұрын

Draining the radiator and block plug are more than enough, quite a few people just drain the radiator and call it a day as it will drain the cylinder head as well, it just wont drain the block. Thanks!

@TuanNguyen-tz7gi 4 жыл бұрын

Great DIY. Will be doing my M coupe soon which is really similar so this is so thanks!

@HBZTwistaOk 4 жыл бұрын

wow you explained everything so well! I could definitely do thiss

@M3NACE 4 жыл бұрын

Do it!

@RACKO1 3 жыл бұрын

Best DIY I’ve seen. Good shit🔥 helped me ALOT.

@palidus5349 3 жыл бұрын

As soon as this warm weather comes I’m pulling all of my cooling system and replacing shit

@steezgodtom 3 жыл бұрын

i said the same thing! then my bmw decided it needed it done a lil sooner haha

@marekd.7350 2 жыл бұрын

Perfect.

@munyazamunyaza5005 2 жыл бұрын

I always loved to own a e36 but people always said its old has too many problems now I feel confident to own one

@edwardglatzmayer5466 4 жыл бұрын

Your videos are motivational and educational. Nice job and thanks! Just purchased stock 96 BMW 328iC in near mint condition with 72K miles. No issues. But no maintenance history either. No cooling issues and fluid is still blue. Belts and hoses look pretty new and in good shape. Not sure if I should change water pump and thermostat. Thermostat cover is aluminum.If you think I should, I'll check pulleys and tensioners too. Oil was not bad but I changed it anyway. Power steering was an issue. Fluid black, Resevoir original including hoses and steering stiff. Flushed it twice and much better. Planning on flushing again and changing resevoir and hoses & this weekend. Let me know what you think on water pump and thermostat. Thanks again.

@M3NACE 4 жыл бұрын

I would, doesnt take much time if you're already in there and its piece of mind. Last thing you want is to do all this work refreshing only for the thermostat to stick 4 months down the road and turn your fresh 72k mile motor into a rod-spinning milkshake machine.

@M3NACE 4 жыл бұрын

@edwardglatzmayer5466 3 жыл бұрын

@@M3NACE Change out the Water pump, themostat, radiator, expansion tank, Coolant level sensor, hoses, pulleys, belts. Added new Bmw coolant. Bled system and no issue with temp gauge. Dead center. However console tells me to check coolant level. Any ideas?

@M3NACE 3 жыл бұрын

@@edwardglatzmayer5466 check to make sure your coolant level sensor is plugged in correctly

@kezug95 2 ай бұрын

Very nice video. Well documented and thank you so much for no crazy camera shakes and music ovelay! Question: you tighted the thermostat housing for the aluminum kind at 89 ft-lbs! Just confirming things, per the manual, which is for the plastic housing OEM, its 10nm (7.3 ft-lbs) just confirming the differences because of product material. How/why 89 ft-lbs?

@kezug95 2 ай бұрын

My Bad! - you correctly said 89 "inch" lbs, which aligns more with 10nm or 7.3ish ft-lbs -- LOL!

@abortionIzmurder 3 жыл бұрын

E36 proper love right there Good job!

@taeb.4121 4 жыл бұрын

Great video my guy. Wish I seen this b4 my fan blade exploded and pinched the radiator

@M3NACE 4 жыл бұрын

Yeah thats no fun, motor mounts!

@fernandoq9334 Жыл бұрын

That's a very dry e36 engine. Did you install the oil seals on the engine? How did you do it? I've read some people add RTV to the gasket.

@blasphemousrumors9835 2 жыл бұрын

Awesome beautiful car 🚗

@BadPandaRacing 3 жыл бұрын

Update found my piggy bank and grabbed a few blue bmw coolants although there now zerox brand but basically $20 a pop G-48 if any 1 is unsure

@I.Odnamra 5 жыл бұрын

I was just thinking about you. No homo.

@M3NACE 5 жыл бұрын

Of course bro, no homo.

@charlemichelleke 2 жыл бұрын

Hello internet, I would also like to rebuild me intire cooling system like you did. But I for the love of god can't find them for 320i??? (Every site I find just goes from 318 to 323/5) Anyone knows where I can find one for 320i? (And delivers to europe wich is aperently not always possible for a car that was litteraly made in the country next to mine) Thanks alot.

@taylorcepin4698 Жыл бұрын

EXCELLENT!!!! LOVE IT

@KenStOnge-vg4fi 3 ай бұрын

Any difference if it’s an automatic transmission?

@rarezer0197 2 жыл бұрын

16:16 ack i was trying that and one of the bolts snapped

@NeonboiiZ 5 жыл бұрын

Awesome video man! Couldn't have came at a better time. I just got myself an e36 and this is definitely on my to do list. What are some signs that my cooling system is failing? Because so far it seems okay, but I don't want to put it off for too long

@BmwMe-uh9sy 5 жыл бұрын

If the thermostat housing is the plastic one assume it needs a cooling rebuild since previous owner may not have taken care of it, if metal u good, just make sure belts and pulleys are ok

@M3NACE 5 жыл бұрын

@@BmwMe-uh9sy +1 my dude, your on it.

@M3NACE 5 жыл бұрын

these cooling systems really sneak up on you. first sign is leaking, residue on the hoses and from fittings and such. on the radiators with plastic side tanks, they will start to leak. if the thermostat or water pump fails, youll be driving and out of nowhere the temp gauge will climb to red and if your unlucky, that will be the end of your head gasket, and maybe even crack your head. no fun.

@kozmek-games939 5 жыл бұрын

Yo man whats up, can you tell me if the relay for the windows is located under the glove box? I washed my car when i was done i turned the car on and the windows didnt want to roll down.

@M3NACE 5 жыл бұрын

I have no idea my dude, maybe you got the regulator inside the window wet?

@kozmek-games939 5 жыл бұрын

@@M3NACE no cause none of the windows go down i checked the fuses il habe to watch more videos

@projman2155 5 жыл бұрын

I prefer to drain everything through the radiator (running the system with the heater on high) or through the water pump hole (if you’re removing it anyway and the car is not on jacks). That block drain plug is just bad design and messy.

@M3NACE 5 жыл бұрын

yeah but the drain plug gets alot more out that through the water pump. agreed on bad design though.

@projman2155 5 жыл бұрын

M3NACE to ensure complete drain, I do a few cycles. It’s like putting a distilled water until it becomes clear.

@redactedmind7115 4 жыл бұрын

Old coolant can become conducive / electrified and cause power surge which will ground out somewhere, hopefully not the fuse box or worse.

@mattpolhamus9194 4 жыл бұрын

This is great man. I'm about to do this exact job with the stage 1 ECS kit, but wasn't planning to replace the radiator unless it looks real bad when I pull it out. Is there a specific reason to replace the rad if it's not leaking? thanks!

@M3NACE 4 жыл бұрын

i ususally just throw a new one in for peice of mind, they do get clogged over time and can leak from the plastic end tanks. i replace it so i dont have to down the road.

@mattpolhamus9194 4 жыл бұрын

M3NACE thanks for the reply, makes sense. I’ll probably replace mine since it has to come out anyway. Love the videos man, you’ve really helped me out a lot! 👍👍

@adrianmediachannel5329 2 жыл бұрын

My water motor is struggling to keep still when I used the e36 clutch nut and the 32mm wrench. Should I take off the 2 bolts like you did to get better rotation, or could it jus be the rust ?

@M3NACE 2 жыл бұрын

You are trying to get the fan off?

@adrianmediachannel5329 2 жыл бұрын

Yeah

@M3NACE 2 жыл бұрын

@@adrianmediachannel5329 you are using the water pump holding tool?

@adrianmediachannel5329 2 жыл бұрын

Yeah it came with an 32mm wrench and that’s what I use to try and turn it, but I think that could be the problem. It tends to jus slide and not actually screw it off

@projman2155 4 жыл бұрын

How do you ensure the water pump doesn’t spin without coolant? I keep hearing if you run the water pump without coolant it will break its mechanical seal.

@M3NACE 4 жыл бұрын

ive never heard of that before. just add as much coolant too the system as you can through the expansion take before you start it and it will be fine.

@projman2155 4 жыл бұрын

M3NACE because after the drain, there would be no coolant, so it makes me wonder how the water pump survives in the initial start up because the T stat is still closed.

@M3NACE 4 жыл бұрын

@@projman2155 the water pump will not break its mechanical seal without coolant in it. it does use the coolant as a lubricant, but it can run without it for a brief period of time without coolant without hurting it. the water pump is just a machined piece of metal with an impeller, shaft, mounting flange and housing. it doesn't care if coolant is there or not. i would be more worried about properly bleeding the cooling system than about the water pump breaking on start up, it will be fine

@projman2155 4 жыл бұрын

M3NACE thanks dude!

@M3NACE 4 жыл бұрын

@@projman2155 of course man!