E36 E46 V8 M60 M62 Swap ; Oil Pump Modification : What Is It REALLY like?
Рет қаралды 7,085
Жыл бұрынBMW E36 E46 M60 M62 V8 swaps need modifications to the oil pump setup . This video shows the mod of the pump in order to fit an Adamat M60 swap kit for E36 or E46 that moves the oil pan forward, similar to Cybul V8 swap kits.
Various companies offer similar kits that require the oil pump to be flipped around in order to clear the steering rack. The pump now mounts to the oil pan that comes with the kit. The pressure valve and pressure feed tube are modified and the impeller shaft moved.
We don't retail these kits, but we offer Wisefab, Feal Suspension , Seems Legit Garage and Fuelab products worldwide,don’t hesitate to contact us on info@einzel.nl
Shop Styling Parts for Audi,BMW, Ford, Honda, Mazda, Mercedes, Subaru, Porsche & VW?
www.k2-industries.com?sca_ref=3202641.z1LBYSR9KJ
Other Videos you don’t wanna miss :
E46 V8 Pro Drift Car
• E46 Drift Build Video ...
Odi Bakchis Formula Drift Nissan S15
• Odi Bakchis explains h...
E46 M62 Vortech Rear Mount Radiator
• Build Video : E46 V8 D...
Nissan S14 Pro Drift Car Build
• Drift S14 with NASCAR ...
Quick Change Diff Install Nissan S14
• Quick Change Different...
Formula Drift Corvette Setup At St Louis
• Behind the Scenes of F...
Worldwide parts :
www.einzel.nl
info@einzel.nl
Dealer for
Wisefab
Feal Suspension
NASCAR gearboxes
Quick Change Custom Differentials
Seems Legit Garage
Fuelab Fuel Systems
Also: Who can guess the track at the end of the video?
@danielfranke5570 Жыл бұрын
Thanks for the video, the information provided with my kit was poor, and this made it a lot clearer.
@banarcus Жыл бұрын
Did this mod to my E46. Works well, no problems at all!
@DriftJesus Жыл бұрын
Great job! Where are you watching from?
@banarcus Жыл бұрын
@@DriftJesus Australia. I've got a 2003 325Ci with a M62 and T5 manual. Great video too mate 👍
@darek4488 4 ай бұрын
Watching this from Poland. I have an idea in my head for an E46 with M62. It all seems a bit sketchy, but I guess the alternative is to mess with the steering rack position which would probably be even worse.
@dylansayles3714 Жыл бұрын
watching from Utah 🇺🇸
@DriftJesus Жыл бұрын
Welcome!
@erichfranke Жыл бұрын
Man, wish I found this video about 2 months ago. Just got done with all this🤦🏻♂️😂 but I had to struggle through the instructions provided…
@OG-nl8so Жыл бұрын
Greetings from Southwest Texas 🇺🇸
@DriftJesus Жыл бұрын
Will be in TX in November!
@OG-nl8so Жыл бұрын
@@DriftJesusSo cool with Aaron and where at ????
@DriftJesus Жыл бұрын
@@OG-nl8so no solid schedule yet but will let you know!
@OG-nl8so Жыл бұрын
@@DriftJesus get ready for "Texas BBQ" throw down.
@crank3646 Жыл бұрын
Hello! So the oil pump is hold with only 2 bolts (on the oil pan)? I was thinking that it will go through the stud on the front, where it was installed originally.
@DriftJesus Жыл бұрын
The original mounting points are not there anymore :)
@crank3646 Жыл бұрын
@@DriftJesus Yes I saw in the manual that we have to cut them. I have oil pump from V12 and can't find a pump from V8. Tried to compare them from pictures, but they look the same (still the part numbers are different). I was thinking the V8 one, will be little bit different design and will be hold by 3 points, but I guess this is not going to be the case.
@nicohakava67 Жыл бұрын
No, there is 3 mounting points you are going to use. 1 on the engine block.
@TurbineResearch Жыл бұрын
Seems like a sketchy operation but I understand that you gotta do what you gotta do to make a project work on a budget.
@DriftJesus Жыл бұрын
Its working for a lot of people, just positioning the pump and tensioning is fiddly and time consuming and I fear people may do that wrong
@banarcus Жыл бұрын
@@DriftJesus just don't do the timing chain guides after this oil pump mod. It is painful!!
@DriftJesus Жыл бұрын
@@banarcus always do them preventively anywayw
@moosegril2796 Жыл бұрын
Hi mate, What is the fi20 exactly. I gather it's a 20mm drill bit? But the "fi" is what loses me. Any insight?
@DriftJesus Жыл бұрын
20mm Check with a measuring caliper
@moosegril2796 Жыл бұрын
@@DriftJesus Is this any particular drill head I need?
@DriftJesus Жыл бұрын
@@moosegril2796 see video, all regular drills. Best would be to machine it on a lathe
@DriftJesus Жыл бұрын
@@moosegril2796 regular drill sir
@budrobadre 11 ай бұрын
Too bad the M60/M62 swaps get this complicated. What would a dry sump system for this swap cost roughly? And does anyone make exhaust manifolds for this swap?
@DriftJesus 11 ай бұрын
Dry sump is 4-6k Exhaust manifolds can be pieced together from X5 but if you want gains custom make them
@sanderziugov 10 ай бұрын
I'm just in the process of fitting S65 headers, light, compact and equal length runners. Flanges need rework but seems doable so far.
@sunsetsiesta4683 Жыл бұрын
Do u mind sending me the instructions cause my kit has the most basic and vague instructions ever from CYBUL
@DriftJesus Жыл бұрын
This is not a cybul kit, best contact them.
@anthonygarcia2496 Жыл бұрын
Interested in California!
@DriftJesus Жыл бұрын
Thanks for watching!
@fabioscarp 10 ай бұрын
Hi could you send me the photos of the instructions?
@DriftJesus 10 ай бұрын
Sadly don't have them , only the video material as shown.
@fabioscarp 10 ай бұрын
@@DriftJesusok thank
ОВР Шоу
Рет қаралды 7 МЛН
WDS_ORIGINALS
Рет қаралды 43 М.
jamoloniy
Рет қаралды 1,7 МЛН