E36 Turbo - Nurburgring Nordschleife BTG - Destination Nurburgring DN21

Рет қаралды 14,327

5 жыл бұрын

Steady morning lap building up pace. Unfortunately after this video it rained all day so didnt manage to go faster.
E36 Turbo Spec -- M52B28, Cometic MLS Gasket, K64 Head Studs, Twin Scroll GT3076R, K64 Twin Scroll Manifold, 50mm External Wastegate, 3" Turbo Back Exhaust, Siemens Deka 630cc, Adaptronic Standalone Management, 346bhp 324lbft @ 7psi, 1200kg
HSD MonoPro Coilovers, 12kg/mm Linear Rear Springs, Roll Centre Corrected Front Hubs, 17x9 Team Dynamics Pro Race 1.2, 255/40 Federal RS-R Tyres.

Пікірлер: 39

@KevMk3 5 жыл бұрын

sounded mega on the track day

@maczanescorpious 4 жыл бұрын

nice beginner lap..

@aaleeba 10 ай бұрын

how do you feel about the 3076r on the m52 ? thinking about using the same turbo for my car. want something more responsive rather than going for big power. plan on using it for autocross and track days. Awesome lap btw !

@reeceengineering3560 4 жыл бұрын

This is an amazing turbo setup. Very cool the intake temp stays at ambient. What offset are your wheels? Im planning to run 17" 255s on my e36 as well

@chrishayn 4 жыл бұрын

Reece Engineering this setup was 17x9, ET22 front ET39 rear.

@rogatki_kz9248 Жыл бұрын

@@chrishayn hello sir. How can I find out the setup of this engine?

@chrishayn Жыл бұрын

@@rogatki_kz9248 What would you like to know?

@hams_718 Жыл бұрын

@@chrishayn Hey man, was the M52B28 you used an iron block or an aluminium one? I'm not entirely sure but I think I read somewhere that certain M52s are iron blocks?

@chrishayn Жыл бұрын

@@hams_718 Aluminium block. I think some US M52s were iron block.

@aleks_the_Great13 Жыл бұрын

Nice driving, are you using an oil cooler? How are the temperatures on track?

@LiamMfive 5 жыл бұрын

Is that 5psi boost? Low pressure setup? Looking to turbo my track car for more power but want it reliable.

@chrishayn 5 жыл бұрын

L16mS86 Full boost is 14psi and makes 415hp/420lbft. This day I was running only wastegate spring pressure, approximately 340hp.

@LiamMfive 5 жыл бұрын

chaynes89 that’s ideal! More than enough power for track days. Very nice. Is there a spec list for what’s been done?

@adamluther4950 4 жыл бұрын

Car sounds great man but I wanted to ask about your suspension? Do you feel you made a good choice with the HSDs? They are on my maybe list of coilovers but cant find a lot of feedback from nurburgring drivers to help with my decision. Also are they 12kg/12kg springs? Thanks man!

@chrishayn 4 жыл бұрын

Adam Luther the HSDs are a great choice out of the lower budget options. I ran 10k/12k in this setup. I’ve just changed suspension but would recommend the HSDs to anyone

@adamluther4950 4 жыл бұрын

@@chrishayn Thanks for the reply! Most dont! Do you find the 10/12kg setup a good compromise for track and road? The car Im putting together is for 80-90% track work but its a long drive to the ring so im trying to take that into consideration as well. Cheers!

@chrishayn 4 жыл бұрын

Adam Luther they should be ok yeah, I’ve never had the car on the road and is partly why I’ve now gone for something with purely track focused rates. You can always back the dampers off to soft when you’re on the road

@OfficialPHASIK 4 жыл бұрын

@@chrishayn what did you replace the hsds with and if you've tried them out was it worth the upgrade? Looking at suspension options at the moment too

@imnota 4 жыл бұрын

@@OfficialPHASIK Get st xta you won't regret it.

@ricky2516 9 ай бұрын

awesome run man, the sense of speed looks so off i couldnt tell it was in MPH till half way then realised your flying through. should look into filming at 24fps as it shows the sense of speed alot more

@bloomberg136 Жыл бұрын

How much Hp?

@simeonpetkov768 3 жыл бұрын

How did you do the roll centre correction?

@chrishayn 3 жыл бұрын

MRT Engineering kit 👍🏼

@milanmakesbeatscapsulecorp945 2 ай бұрын

What digital dash is that?

@chrishayn 2 ай бұрын

Race Technologies Dash2PRO

@julipfen9154 2 жыл бұрын

Awesome !! What diff ratio ??

@chrishayn 2 жыл бұрын

3.46

@julipfen9154 2 жыл бұрын

@@chrishayn thx 👌🏻🔥

@fischraubart8234 3 жыл бұрын

Fast

@JorMorera 3 жыл бұрын

thats MPH right?

@chrishayn 3 жыл бұрын

Yes MPH

@duartesantos3668 5 жыл бұрын

compression ratio?

@chrishayn 5 жыл бұрын

Not sure exactly. 0.5mm skimmed from cylinder head and MLS gasket 3.55mm thick.

@duartesantos3668 5 жыл бұрын

@@chrishayn thanks for the answer! But around 9?

@chrishayn 5 жыл бұрын

Duarte Santos I didn’t calculate but yes I was aiming around 9:1

@albertorosquete5779 4 жыл бұрын

E36 with K24, Turbo Aliexpress (150euros) +500hp y only 1040 kg...

@TKSparten117 3 жыл бұрын

Yeah the K24 cost nothing.... Aliexpress Turbo? Jesus....

@01bier 11 ай бұрын

But a old Strait 6 bmw engine sounds mutch beter wit nice boost mijn 2.0 m50 stock Block on 1.1 bar boost makes 380 whp en is very fun wit a 200 euro ebay turbo