@AlexPillarPlayz 27 күн бұрын
Can you how to take it off ?
@chriskeep9461 10 ай бұрын
did you look at the intake valves for carbon? I can't imagine how carbon would get on intake valves, but why I ask is the dealer just quoted 7000 for occasional EPC injector 1 no signal repair. their solution was new injectors 2700, scrape carbon off intake valves ,460, new harness 400 and replace computer 3000.ox sensor too plus tax. since it seems to happens when hot im guessing only the computer is sensitive to that, but will start with injectors. plus 158 for the scan.
@raulcorrea9923 3 ай бұрын
Question were did you get the repair manuel
@E39M5SPEED 3 ай бұрын
Alldata
@Getttouttt 16 күн бұрын
@@E39M5SPEEDhello why did you replace were you gettting misfire code ?
@E39M5SPEED 16 күн бұрын
@@Getttouttt yes.
@Getttouttt 16 күн бұрын
@@E39M5SPEED mine is doing the same thing as far as misfire only in one cylinder i replaced all plugs and still same thing I am guessing this is the problem but why only one cylinder do injectors just go out like that ?
@E39M5SPEED 15 күн бұрын
@@Getttouttt yes. Because of cheap fuel in the United States and nobody ever performs ultrasonic cleaning of injectors every 50k miles. You must replace all 4. DON’T try to replace just one. Make sure to get all seals and gaskets. Make sure to use only OEM injectors and buy the harness at the same time. Because 9 times out of 10 harness breaks and can cause misfires. You won’t even see where since it’s all inside a wiring loom.
driving 4 answers
Рет қаралды 781 М.
Nathans BMW Workshop
Рет қаралды 98 М.
golf Wagen
Рет қаралды 116 М.