E46 M3 Differential Removal Quick and Easy

  Рет қаралды 7,540

Rastaman Builds

Rastaman Builds

Жыл бұрын

Removing the differential from a BMW E46 M3 can be a tricky job, but it's doable with the right tools and patience. First, you'll need to drain the differential fluid, then remove the driveshafts, flange bolts. Inverted torx are the fasteners used by the manufacturer so you will need a set. If you can get the wrenches as well that would be a big plus. Make sure you have the right tools, such as a torque wrench, a socket set, and a transmission jack to support it. It is not extremely heavy but it is also not light. Be sure to keep the bolts and other components organized as you go. With patience and careful attention to detail, you can successfully remove the differential from your E46 M3. #m3 #differential
▶️ I have been doing automotive service and repair for over 20 years and so have accumulated many tricks and I am sharing them with you here to help you on your automotive journey. I hope you like the content.
▶️Share this video: Do you know how your wheel works?
• Do you know how your w...
⬇️⬇️Connect with me ⬇️⬇️
MERCH: rastaman-builds.myshopify.com
Website. rastamanbuilds.com
✅Email: rastamanbuilds@gmail.com
📌Book a call : calendly.com/rastamanbuilds/1...
🟢Need a repair tip? rastamanbuilds.com/get-help/
▶️Instagram : / rastaman_builds
▶️Facebook : people/Rasta...
🔴My channel Home Page: / @rastamanbuilds
🟢Subscribe to my channel : youtube.com/@RastamanBuilds?s...
✅If you like the content send us some love using this link. It is greatly appreciated. Thanks! paypal.me/RastamanBuilds?coun...
⬇️⬇️Videos you might like⬇️⬇️
▶️Ford Explorer Electric Rack and Pinion Replacement
• Ford Explorer Electric...
▶️E46 M3 Water Pump Replacement Jamaican Style '
• E46 M3 Water Pump Repl...
▶️Removing a Stuck Drain Plug
• Removing a Stuck Drain...
▶️No More DIPSTICKS WHY?
• No More DIPSTICKS WHY?
🛑Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. Rastamanbuilds is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information.
The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. Rastamanbuilds strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low -quality auto parts may not provide the appropriate level of road safety.
© 2022 Rastamanbuilds All rights reserved

Пікірлер: 40
@Mr.PhotoASZ
@Mr.PhotoASZ Ай бұрын
Never imagined how huge it is. Thank you for such an amazing video to watch and learn
@RastamanBuilds
@RastamanBuilds Ай бұрын
So very welcome
@emilepapillon2275
@emilepapillon2275 Жыл бұрын
"Ain't nothin' to do, but just keep on turnin' " was my fav part. It's my new motto. Great vid!! Thanks :)
@RastamanBuilds
@RastamanBuilds Жыл бұрын
Glad you liked it!
@user-rfyl4t
@user-rfyl4t Жыл бұрын
Lots of positive energy from your videos, I can't stop watching!
@Nachizl248
@Nachizl248 5 ай бұрын
Great stuff man 👍🏼
@RastamanBuilds
@RastamanBuilds 5 ай бұрын
Appreciate it! Much love
@oks2404
@oks2404 Жыл бұрын
Instructional video was good enough to convince a novice like myself, that I could actually do this; but as you know, I'm here for the comic relief 😀 🤣😇
@mtl2010ps
@mtl2010ps Жыл бұрын
Great insight on how you work! I’m an apprentice auto mechanic and it’s nice to see how you’d do some jobs! Cheers friend
@RastamanBuilds
@RastamanBuilds Жыл бұрын
Thank you have a blessed day
@potatopack
@potatopack Жыл бұрын
love the voice over sooo clever to do it this way, best way to review your work. SUPER PRO
@fyahdre8340
@fyahdre8340 Жыл бұрын
Now I understand why BMW is shortened for Break My Wallet. Love di content still.
@RastamanBuilds
@RastamanBuilds Жыл бұрын
Lol
@ForidKhan123
@ForidKhan123 Жыл бұрын
BMW bolts and studs are made from Inconel. That’s why they’re a lot more resilient than stainless steel.
@roderickcalvin
@roderickcalvin Жыл бұрын
Ras showing off his knowledge of Murphy's law👊🏾. Respect and guidance big man
@RoopsPhoto
@RoopsPhoto Жыл бұрын
Good video. Love seeing it.
@AXB31
@AXB31 Жыл бұрын
Great video! Helped a lot when rebushing the rear end! Thanks!
@RastamanBuilds
@RastamanBuilds Жыл бұрын
Happy you liked it
@Realyouthtv
@Realyouthtv Жыл бұрын
Coming from TikTok
@RastamanBuilds
@RastamanBuilds Жыл бұрын
Welcome and thank you. Hope you like it
@joeyvisser6953
@joeyvisser6953 8 ай бұрын
Nice video. Great cars to work on. If you want to save time. You don't have to remove the driveshaft. Just unbolt the driveshaft on the differential side. Mark the center support bearing due preload, than loosen the CSB. It will allow the driveshaft to bend, hence separating the driveshaft from the differential will be possible.
@lukeg6767
@lukeg6767 8 ай бұрын
How do you mark the csb? Purpose of this is to make sure it deforms bearing just like it did before right?
@joeyvisser6953
@joeyvisser6953 8 ай бұрын
@@lukeg6767 The CSB is mounted with two 13mm nuts. The holder is preloaded. You can Mark the holder, since it allows you to place the CSB back and forth.
@sancheslynfatt
@sancheslynfatt Жыл бұрын
Nice
@cullendolan5619
@cullendolan5619 Жыл бұрын
I came over from Instagram after findong your profile a couple days ago. Great video, awesome details and I like hearing your thought process
@RastamanBuilds
@RastamanBuilds Жыл бұрын
I appreciate you Thanks a lot for the support
@jdabramson
@jdabramson Жыл бұрын
Stap-on🤣🤣🤣 Thank you 🔧💪🏾
@RastamanBuilds
@RastamanBuilds Жыл бұрын
Hahahahahaha
@zeer6425
@zeer6425 9 ай бұрын
Hopefully I can be as cheerful while I remove my rear differential😭👍🏽
@RastamanBuilds
@RastamanBuilds 9 ай бұрын
You can do it!😂✅
@burtherny4816
@burtherny4816 Жыл бұрын
Now that was a lot of work 😅
@ghadman1061
@ghadman1061 4 ай бұрын
Up up general! 1❤1❤
@rrbimmer
@rrbimmer 11 ай бұрын
They use copper nuts on the exhaust which doesn’t rust nearly like steel and they are softer. Also the copper doesn’t bind like steel and thats why they put copper in anticease grease
@icxsingh
@icxsingh Жыл бұрын
What’s wrong with the diff? Are u going to video the work on the diff?
@RastamanBuilds
@RastamanBuilds Жыл бұрын
Yes
@DerKaktusAvant
@DerKaktusAvant 5 ай бұрын
You don’t have to remove the prop shaft completely. Just unbolt it from the diff.
@RastamanBuilds
@RastamanBuilds 5 ай бұрын
I was doing guibo bushing as well
@caesarguzman5831
@caesarguzman5831 Жыл бұрын
Hey rastaman, I was charged 20 hours to remove the differential and replace the differential cover. The differential had to be inspected because a bolt had backed out. 20 hours for the complete job. I feel like I was ass raped mon!!! What do you think??? Not only that, my car has a new subtle clunk it didn't have before....
@RastamanBuilds
@RastamanBuilds 11 ай бұрын
The clunk could be one of the mounting bolts need to be tightened and 20 is a tad bit much. A little on the high side in my opinion
@caesarguzman5831
@caesarguzman5831 11 ай бұрын
@RastamanBuilds I appreciate your reply! I don't trust them, I feel that they may have sabotaged my car. I had an incident happen a week later after I got my car back. My chain tensioner bolt came loose completely and nearly all my oil came out, and made a mess. I have reason to believe this was loosened purposely.
e46 M3 s54 full VANOS service rebuild
23:27
Mechanikas Lukas
Рет қаралды 18 М.
Smart Sigma Kid #funny #sigma #comedy
00:26
CRAZY GREAPA
Рет қаралды 11 МЛН
아이스크림으로 체감되는 요즘 물가
00:16
진영민yeongmin
Рет қаралды 60 МЛН
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 1,7 МЛН
E46 BMW Differential Swap DIY
17:32
Throttle House
Рет қаралды 206 М.
HOW TO BUILD AN E46 M3 TOURING | PART 3
20:55
Autoalex Cars
Рет қаралды 342 М.
E46 M3 Clunk Fix - Front Diff Bush
16:43
DannyDC2
Рет қаралды 23 М.
E46 M3 Diff Refresh
16:00
Hoon Garage
Рет қаралды 14 М.
How a Differential Works | Types of Differentials Explained
12:26
The Engineers Post
Рет қаралды 911 М.
E46 M3 diff GEAR RATIO CHANGE | 4.10 gears installation tutorial
28:05
RacingDiffs Official
Рет қаралды 10 М.
NEVER do THIS to your Automatic Transmission Car
15:15
The Car Care Nut
Рет қаралды 2,8 МЛН
Ultimate Guide to Modifying and Maintaining Your E46 M3
14:21
Precision Sport Industries
Рет қаралды 113 М.
Не хватило бензина встал на трассе
1:01
чоооооооооооооо
Рет қаралды 922 М.
If You Get LOCKED In The Back Of a Tesla Cybertruck
0:19
Nelly Electra
Рет қаралды 4,6 МЛН
Какая машина у Мистера Биста 🤣
0:31
Авто.Бот
Рет қаралды 2 МЛН
New tfc sports car yellow colour kardya
0:27
Ruhul Shorts
Рет қаралды 3 МЛН