Here's how I motorized my kayak by installing the MotorGuide Xi3 on the bow of my Nucanoe Unlimited.
Items needed:
MotorGuide Xi3 Kayak Trolling Motor: bassproshops.vzck.net/GmBkor
MotorGuide Xi3 Quick Release Bracket: www.nucanoe.com/product/1921-...
2 eight or ten-gauge marine plugs and receptacles: bassproshops.vzck.net/R5joaa
12 feet of eight or ten-gauge wire (keep it the same as your plugs and receptacles):
12v battery: bassproshops.vzck.net/k03vbn
60A circuit breaker: bassproshops.vzck.net/Y9GYom
Tools needed:
Screwdriver
Wrenches
Drill & hole saw
Wire crimpers/pliers
One reason I chose to purchase the Nucanoe Unlimted was how easy it is to install a bow-mount trolling motor on it. Here's how I quickly installed the Motorguide Xi3 on the front of my kayak.
The installation was pretty straightforward and simple. So, if you are just a little bit handy with tools, you'll easily be able to do this one yourself. However, if you don't feel comfortable about it, feel free to take it to your local kayak shop to have them rig it!
Step 1: Install the quick-release bracket & block on the kayak.
Step 2: Install the other half of the quick-release bracket on the trolling motor.
Step 3: Drill your holes where the receptacles will go.
Step 4: Run the wires through the hull of the kayak.
Step 5: Crimp the wires to the plugs and receptacles. Red with red and black with black! Don't make the rookie mistake I did!
Step 6: Ensure the trolling motor works.
Step 7: Install/secure the receptacles to the hull of the kayak.
Step 8: Take it to the water and enjoy having a motorized kayak.
Timestamps:
00:00 Intro
00:21 Product List
00:28 Installing the quick-release MotorGuide xi3 bracket
02:17 Getting power to the kayak trolling motor
03:59 Running the wires
05:13 Testing the trolling motor
05:37 3 Reasons why the MotorGuide Xi3 might not be for you...
#MotorGuideXi3Install #MotorGuideXi3KayakInstall #MotorizedKayak