EASIEST way to make the ULTIMATE Gameboy Advance SP! FunnyPlaying IPS Screen and Retro Modding Shell

Рет қаралды 262,633

Күн бұрын

Retro Renew Episode Description: Step-by-step instructions on how to install a FunnyPlaying IPS kit into a Game Boy Advance SP to build the ULTIMATE handheld console!
In today’s episode of Retro Renew, we’re going to install a FunnyPlaying IPS screen into a Japanese Imported Game Boy Advance SP AGS-001. As you may or may not know, the AGS-001 has a front lit LCD which leaves a lot to be desired. Nintendo later fixed this issue with the release of the AGS-101 model GBA SP. Despite this, sourcing an AGS-101 console or AGS-101 LCD are both expensive endeavors. The IPS kit from FunnyPlaying is a great alternative to the AGS-101. To help with the install, I’ll be using a pre-trimmed GBA SP shell from Retro Modding. I highly recommend using a pre-trimmed shell to do this mod as it will make the whole install significantly easier. So sit back, relax and enjoy the mod!
So here's what you will find in this video:
► 0:00 Episode Prelude
► 1:04 Introduction to the ULTIMATE GBA SP Build and Episode Contents
► 2:37 The tools and parts needed for this modification
► 2:51 Let’s get started! Instructions to on how to build the ULTIMATE GBA SP
► 16:46 Modification Complete, you did it!! Mod results overview
► 16:50 Review of the Modification
► 18:27 LCD comparison between AGS-101, FunnyPlaying IPS, GBA Micro, GBA Macro (DS Lite)
► 21:18 Episode conclusion. Thanks for Watching!!
Retro Modding Affiliate Links/Discounts:
SAVE 5% on any purchase from RETRO MODDING, including this IPS kit from FunnyPlaying when it’s available on their website, by using coupon code: MACHONACHO
SUPPORT THE CHANNEL by using my affiliate link to Retro Modding. It's a free way to support my channel. Thank you all so much!: bit.ly/39hHnz7
AMAZON Affiliate Links: Tools I use for Modifications
-EZ-Flash Omega - amzn.to/3hQlIDB - Best flash cart for the GBA!
-Solder FLUX I use - amzn.to/2CmPX4U
-XPOWER Electric Duster and Dryer - amzn.to/2Ylq6Dd
-Circuit Board Holder - amzn.to/2zV7VuC - This thing is Awesome and only $10!
-iFixit Toolkit I use for all my projects: amzn.to/2CnJEOt - Everything you need!
-Silicone Mat for soldering: amzn.to/314rc88
-28 AWG gauge wire: amzn.to/2Ni1V22
-Wire Stripper/Cutter: amzn.to/3hQ7fb2
-Flush Cutters: amzn.to/37P8rGV
-HAKKO Solder tip cleaner: amzn.to/2V2uaWU
Full disclosure, I get a small percentage of each sale that uses an affiliate link or coupon code. It’s a great way to help SUPPORT my channel at no cost to you so I can continue to make these videos for all of you, everyone wins! And as always, thank you for your continued support of my channel!
Thanks for watching and if you liked this video please leave a LIKE. Subscribe to my channel and click the 🔔 icon for notifications when I post a new video.
Check out my Special 5-Part Series on Backlighting the Game Boy Color:
• Game Boy Color
Also, FOLLOW me on Instagram and LIKE my Facebook page:
Instagram: / machonachoproductions
Facebook: / machonachoproductions
Intro Music by Matthew McCheskey:
-Website: matthewmccheskey.bandcamp.com/
#Gameboy #FunnyPlaying #AGS101 #Gameboyadvancesp #gameboymods #RetroModding
DISCLAIMER: This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not Macho Nacho Productions or Tito Perez. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source.

Пікірлер: 413

@MachoNachoProductions 4 жыл бұрын

Thank you all for watching the video! I really hope you enjoyed it! If you found the video useful/helpful/entertaining, give it a LIKE:) Also, consider SUBSCRIBING to the channel to stay up to date with all my future content by clicking the following link: bit.ly/3bw08kk Cheers!

@8bitbros 4 жыл бұрын

Just wanted to say thank you. I installed my Funny Playing IPS a couple days ago and even felt confident enough to try soldering because of how well your videos are shot. The screen is amazing! Liked and subbed 👍

@MachoNachoProductions 4 жыл бұрын

Thank you Gabriel! I’m glad your install turned out well! Welcome aboard! Cheers buddy!

@moetha1mexikan322 3 жыл бұрын

I love refreshing older games to Keep up the good work

@MachoNachoProductions 3 жыл бұрын

Will do! Thanks Moe!

@8bitbros 3 жыл бұрын

@@MachoNachoProductions Hey congrats on the shout-out on @mylifeingaming latest vid! That's awesome!

@echangwang1821 4 жыл бұрын

Just a little tip for those who might not have noticed, when screwing screws into softer plastic, turn the screw the opposite way slightly, you'll hear a slight click if the screw holes have already been threaded. I'm not sure if the RetroModding shell has pre-threaded screw holes, but it's still a good practice just so you don't accidentally wreck the threads.

@MachoNachoProductions 4 жыл бұрын

Yep, this is good practice. Thank you for letting everyone know. I should explain it in the video. I will probably make a video that goes over good technique for modding consoles. Cheers buddy!

@Mirjj 3 жыл бұрын

the above the cartridge screw was wrong, had to be a flat.

@jmibo 3 жыл бұрын

Yup, my original GBA case completely shattered about a week after putting it back together, I think because I didn't do this.

@totallyfrozen 2 жыл бұрын

Exactly! Also makes screwing lids on things easier too. Basically you’re just aligning the threads so you don’t cross-thread and strip the threads.

@iamapotato 2 жыл бұрын

Great tip, thanks!

@SoopaBee 3 жыл бұрын

I’ve watched a few of these GBA SP screen replacement videos and I have to say that this one is by far the most comprehensive and detailed. Well done. I’ve got a replacement shell and IPS screen ordered and you can bet that I’ll be using this video as a guide. Thank you so much for the detailed and thorough walk through!

@MachoNachoProductions 3 жыл бұрын

Thank you SoopaBee! You are most welcome buddy! Glad the videos were helpful! Sounds like you have an awesome SP project! Should be fun! Cheers!

@fabianazappelini8404 Жыл бұрын

Tenho um e queria doar a uma criança. Porém ñ tem carregador

@thetruejay20 4 жыл бұрын

I like how to break down everything, and all the steps needed!

@MachoNachoProductions 4 жыл бұрын

Thank you! I'm so happy you are finding the videos helpful! Cheers!

@paulus_germanus 3 жыл бұрын

Dude, a hugs part of success of those vids of yours are your production skills - I literally get goosebumps watching those mods to this music and the commentary. This channel is the find of the month. Keep it up, bro!

@MachoNachoProductions 3 жыл бұрын

Thank you so much Pawel 🙏! Cheers buddy!

@That_KidShady 2 жыл бұрын

@@MachoNachoProductions i was about to finish putting in my back cover on and my right bumper button came off I was wondering if theres a video that shows how to put it back on

@kraskel1017 2 жыл бұрын

Giving two ags001s this exact treatment presently. Your video has me even more excited to pick them up in a few weeks.

@dylanhoneyfield568 4 жыл бұрын

Loving your studio setup, great relaxing atmosphere!

@MachoNachoProductions 4 жыл бұрын

Thank you Dylan! So happy to hear that! Cheers!

@gamergrill9629 3 жыл бұрын

Love the purple aesthetics with the relaxing music :)

@MachoNachoProductions 3 жыл бұрын

Thank you! So glad you’re enjoying the channel! Cheers buddy!

@Roaming_Hermit 2 жыл бұрын

This was my first solder build and even though I was nervous and shaky as hell, I managed to do it thanks to this video, Thanks (^~^) (And if I could, anyone can lol)

@walmart_cereal 2 жыл бұрын

Same as well I never soldered before until this now I have a skill I can use in other projects thanks to tito

@gadrexxulier7452 Жыл бұрын

Did you buy a solder kit? I've never done this before either but i want to try it out

@diode_wow 3 жыл бұрын

This video is a life saver. I bought a GBA SP not too long ago just cause I wanted to play some of the games on the original console. The battery and screen are definitely on their last legs so this video helps a ton. Will definitely mod this baby back to life!

@Mahlak_Mriuani_Anatman Жыл бұрын

Emulators: 👀 lmao

@IceSmash2 Жыл бұрын

@@Mahlak_Mriuani_Anatman The touch & feel of the console is something the emulator can't replace.

@akweasel2017 4 жыл бұрын

That pearl white shell is gorgeous! I’m jelly. Can’t wait to be able to order one of those screens. Will definitely try that mod. Great videos Tito. Keep up the good work!

@MachoNachoProductions 4 жыл бұрын

Thanks dude! Yeah, the pearl white is a fantastic color! Highly recommended! And the IPS screen is amazing!

@dccelly1615 4 жыл бұрын

This was awesome Tito, thank you! Really like how you showed and explained the install. This’ll be my next mod for sure.

@MachoNachoProductions 4 жыл бұрын

DC Celly, so glad you enjoyed the video! I hope it’ll come in handy when you do your mod! It’s definitely an awesome upgrade to the AGS001! If you have any questions about it let me know!

@albertvermeule5844 2 жыл бұрын

Modded my GBA today and your video tutorial came in very handy. Thanks

@TVsMrNeil 11 ай бұрын

Wow, you are so chill in your old videos.

@NottJoeyOfficial 5 ай бұрын

It's really cool to come back to these old videos sometimes and see how he is in them.

@TheDanteNero98 4 жыл бұрын

Your videos are really professional man! You definitely deserve more subscribers.

@MachoNachoProductions 4 жыл бұрын

Thank you dude! That really means a lot to me! So glad you like the videos! Cheers!

@cr0w860 Жыл бұрын

Just restored my 001 as well! One of the coolest experiences

@brianbaker3731 3 жыл бұрын

I just pulled my GBA SP out of storage. I probably haven’t played it in for more than 10 years. My first thought was that the screen was really hard to see - I guess my eyes aren’t as good as they used to be. It’s great to see some easy mod options out there to improve on this.

@MachoNachoProductions 3 жыл бұрын

Hey Brian! Yes, this is a great time to be in the GBA modding scene! Lots of great, user friendly kits are available. I hope you enjoy the videos on the channel and that they will be helpful to you when you choose to mod you SP with an upgraded screen. Cheers buddy, and best of luck!

@MrMxTech 4 жыл бұрын

Awesome video, my first SP was Purple and the first game i played on it was Pokemon Ruby. I was blown away was like 13 years old.

@MachoNachoProductions 4 жыл бұрын

Thanks Mr. Max! That’s awesome! I’m actually really liking the SP. I never played Pokémon Ruby, perhaps I should give it a try!

@MrMxTech 4 жыл бұрын

@@MachoNachoProductions You really should at this point it actually is a piece of history. I ordered from Ebay an ips advance, because retro mod is not delivering due to the sanatary emergency. So i will do my review when it arrives. ;)

@MachoNachoProductions 4 жыл бұрын

Yeah unfortunately retro modding is shut down temporarily. I look forward to seeing your review of the IPS!

@MakoyUnggoy 4 жыл бұрын

I just bought a modded GBC with 5 brightness levels and even on the highest setting it stil looks quite dark after I've been playing on my GBA with the V2 IPS, that thing is so bright and sharp to look at!

@MachoNachoProductions 4 жыл бұрын

Yeah the V2 IPS is fantastic! Which GBC backlight kit do you have?

@MakoyUnggoy 4 жыл бұрын

@@MachoNachoProductions I'm not sure as the bloke I bought it from just said it was a screen from China so it could be anything!...you just tap the IR sensor on the top of the GBC to select but it only looks half as bright as my IPS screen does (but personally I think the IPS screens are too bright anyway on maximum)

@MachoNachoProductions 4 жыл бұрын

Ah gotcha. The IPS does get incredibly bright for sure. Cheers!

@ramonatalizio7315 3 жыл бұрын

Well just got through my first build!!! Thank you man! Made it too easy for me!

@MachoNachoProductions 3 жыл бұрын

You’re most welcome Ramo! So glad the video was helpful. I always love hearing that! Cheers buddy, and congrats on the build!

@sk8rboy1396 4 жыл бұрын

I want to say thank you for breaking down the hinge part. After watching a few videos on reshelling my SP I could not get the hinges to act correctly. I was placing them in wrong like not opening the SP partially when placing them in. Thank youuuu.

@MachoNachoProductions 4 жыл бұрын

You're welcome! So glad my video was able to help and that everything worked out for you and your SP! Cheers buddy!

@elflaco3741 2 жыл бұрын

first vid I’ve seen from this channel, 🔥🔥

@Moonview90 3 жыл бұрын

I have a GBA SP too and I think I'll buy this screen, it looks amazing (I already bought a case and I'm waiting to the arrive). Your video is super well done! Very organized, a lot of takes, the music is also a plus and not annoying, so keep doing this! I suscribe to support you!

@MachoNachoProductions 3 жыл бұрын

Thank you Moonview90! I really appreciate it and am glad you are enjoying the channel! Also thank you for subscribing! I'll have plenty of great mod videos to come! Cheers buddy!

@Moonview90 3 жыл бұрын

@@MachoNachoProductions Nice, I'll check them out! :)

@dowranj88107 2 жыл бұрын

Thanks a lot for the tutorial - helped me a lot during my modding :)

@lucentv 4 жыл бұрын

I just had to double check that my SP was still here. I have the same color and it's scraped up in exactly the same way.

@MachoNachoProductions 4 жыл бұрын

Haha!

@kuroser353 3 жыл бұрын

Wtf my GBA SP looks exactly the same

@MachoNachoProductions 3 жыл бұрын

Haha, you have good taste my friend! Cheers Kuroser!

@anonymousidea9119 3 жыл бұрын

Its almost as if they scrape in the same exact places by design...

@DaBudaa1 Жыл бұрын

I love the Gameboy Advance SP. I saved my allowance just to buy one in order to upgrade from my Gameboy Color so that I can play Pokemon Saphire & Zoids Legacy. Later down the road, I also purchased the wireless link adapter.

@heartbreakerteam 2 жыл бұрын

Thanks for all the info, very good video 👍🏼

@41chaing Жыл бұрын

This is soo cool!! I’m gonna try this😍 bringing back nostalgia

@PurpleTaco2959 3 жыл бұрын

Recently got a GBA Sp colored blk. I plan to make these mods thank you so much!got retro consoles laying around lile my n64 i plan to mod up too.

@MachoNachoProductions 3 жыл бұрын

Your welcome DuskySpider! I hope the video will help you do your mod. Cheers buddy!

@Hypothics 3 жыл бұрын

Man it looks great!!! your content is so professional and you are going to go far, step by step on all the videos I've watched. Keep it up😁

@Hypothics 3 жыл бұрын

Oh and also where did you get the shell?

@MachoNachoProductions 3 жыл бұрын

Thank you Hypothics! So glad you enjoyed the video and found it helpful! I got the shell from RetroModding. There should be a link to it in the video description. Also, I remember they stopped making shells for a while but they should have them back in stock now. Cheers buddy!

@Hypothics 3 жыл бұрын

@@MachoNachoProductions yeah no problem. Thanks, have a great rest of your morning

@johnturner4559 4 жыл бұрын

Your videos are great, very professional editing! Glad to have subscribed while your channel is small, I have a feeling it's going to grow very quickly...

@johnturner4559 4 жыл бұрын

Also when you say you buy your consoles from Japan, where specifically do you mean?

@MachoNachoProductions 4 жыл бұрын

Thank you I’m glad you like the channel!! I usually pick up Japanese consoles from eBay sellers based in Japan. One that I frequent is J4U (Japan_4_you). They have a lot of great stuff. There are other large Japanese sellers on eBay as well. Cheers!

@johnturner4559 4 жыл бұрын

@@MachoNachoProductions Thanks!

@PythBuster 11 ай бұрын

Thanks for this video! I will try :)

@TheRCAdventurist 2 жыл бұрын

Extremely helpful video. Thank you

@Whitemoonwolf132 4 жыл бұрын

Well, I'm definitely gonna come back to this video when I do my own mod :3

@MachoNachoProductions 4 жыл бұрын

Awesome! Sounds good! Are you going to do just the IPS mod or are you swapping the shell also? Interested to know what your mod will look like. Cheers!

@Whitemoonwolf132 4 жыл бұрын

@@MachoNachoProductions I'm gonna Def be replacing the shell lol the one I got is all beat up and scratched to hell. And yeah, I'll be doing the IPS mod too. There's a site, godofgamingshop.com, that sells the entire kit, shell and all, for like, 100 bucks.

@MachoNachoProductions 4 жыл бұрын

Jacob Clark awesome sounds good! I need to check that store out. Sounds like they have some good bundles.

@benjaminfuenzalida6765 3 жыл бұрын

Thanks, this was very useful :D

@luisantiago 4 жыл бұрын

Que Padre 💖 Looks Amazing 🙌🏻 Thanks for the video.

@MachoNachoProductions 4 жыл бұрын

You are very welcome! Glad you liked the video! Cheers buddy!

@GodsPoetryProductions 3 жыл бұрын

Thanks for the video. Very detailed and informative.

@MachoNachoProductions 3 жыл бұрын

You’re most welcome!

@leader6303 4 жыл бұрын

bought a ags001 bought a battery, ips screen and shell in amazon, also ordered new battery incase my ips screen takes more drain then expected, so ive done alot research, looking for a hard legit cooy of pokemon gen3 hoen and then i might buy a ezflash good video :)) exciting stuff

@MachoNachoProductions 4 жыл бұрын

Thank you! Glad you enjoyed the video! The EZ Flash Omega is a great option! I recommend it! Best of luck in your AGS001 project! cheers!

@Ronin7477 4 жыл бұрын

first time seeing your videos and I gotta say I really like your close ups and detail instructions. I'm a bit bummed because I order this kit from RetroModding and it got canceled due to Covid, I am waiting for them to reopen this kit to the U.S.

@MachoNachoProductions 4 жыл бұрын

Thanks Ronin7477! Glad you like the videos! I'm sorry to hear that dude. Hopefully they will be up and running soon! Cheers!

@connormclaughlin6955 2 жыл бұрын

One thing I got from this video is what I was looking for. I require no brightness and I was hoping to skip the soldering. Thanks for the confirmation

@Darling_Decay Жыл бұрын

I got one recently and was wanting to do this, I already did it to my 3DS

@leecollins5479 4 жыл бұрын

great video! i have a first gen ags 101 lcd in my original gba.your sp mod looks much better

@MachoNachoProductions 4 жыл бұрын

Thanks Lee! I'm so glad you liked the video! I'm a real fan of the AGS-101, it's definitely the best GBA for the Nintendo purest, however the IPS kit from FunnyPlaying just makes everything look so dang good! I'd hold onto that 101, it's definitely more of a collectors item! Cheers!

@leecollins5479 4 жыл бұрын

@@MachoNachoProductions ots strange nintendo didnt do a backlit gba from the start

@MachoNachoProductions 4 жыл бұрын

Agreed, would’ve totally made sense to. Perhaps it was a cost savings thing and they were waiting for the front/backlit lcd’s to get cheaper.

@FoundSeventhGear 3 жыл бұрын

awesome tutorial!

@RangerOfTheOrder 2 жыл бұрын

I don't know if it was available at the time you made this, but you can buy a kit to replace the original charging port with a USB-C port. Definitely makes charging much more convenient

@jurjcluners8490 Жыл бұрын

I've never had an issue with my sp screen. The front lit screen is plenty bright enough for being outside and you can turn it off while inside with good light conditions. I have steadily been using my original one for over a decade and the screen is one of the only components that hasn't diminished in Quality.

@matthieuadenis7263 3 жыл бұрын

Awesome video! You inspired me to make my first mod 🤞

@MachoNachoProductions 3 жыл бұрын

That's fantastic Matthieu! Did you mod a Game Boy Advance SP, if so what kind of mod? Just curious. Would love to see what it looks like! Cheers buddy!

@matthieuadenis7263 3 жыл бұрын

@@MachoNachoProductions I just received an old SP from ebay and waiting for the parts but I'll share the results ;)

@MachoNachoProductions 3 жыл бұрын

Sounds good dude! Look forward to seeing the final product! Best of luck! Cheers!

@animeking1357 2 жыл бұрын

I love your intro. Flipping through all the different consoles with the upbeat music is soothing. Is there any reason the new shell doesn't come with the hinge pieces? How is the shell trimmed compared to an original gba sp?

@MachoNachoProductions 2 жыл бұрын

Thank you! I think some shells come with them and others don’t. You can also buy them separately.

@johnnytran3071 3 жыл бұрын

Huge fan of your videos. Even inspired me to start a gameboy macro myself! Just curious, I noticed you have tons of great tools, skills, and your video production is top notch. Does that relate to your profession or have you just had this hobby for a while to acquire that?

@MachoNachoProductions 3 жыл бұрын

Thank you Johnny Tran! Means a lot buddy! It’s actually just my hobby, mostly self taught. I really enjoy modding consoles and videography. So I though I’d put the 2 together and make a KZfaq channel! Cheers buddy!!

@jakethesnake4040 3 жыл бұрын

I bought one that doesn’t say Gameboy advance sp on the bottom and that’s my only complaint lol. Still looks fantastic and I’m loving the IPS

@hovermotion 2 жыл бұрын

Great producton...just doing my Gba but the next one is the GBA SP.

@luissegura2170 Жыл бұрын

I love u Tito, u r the 🐐

@nickpavloff8977 4 жыл бұрын

Great channel.

@MachoNachoProductions 4 жыл бұрын

Thank you Nick, glad you are enjoying the channel! Cheers!

@hawkfeather6802 3 жыл бұрын

Very nice video! If you don't mind not being able control the brightness,the soldering can be optional.

@ainzooalgown7589 3 жыл бұрын

I did this mod on my 001, i have one GBA SP 101 and one 001 and one GBA where the screen had a crack, so i took my original 001 screen and used it in my GBA. and can confirm the IPS screen is has a higher pixel density than the 101 or 001 screen.

@chochix 3 жыл бұрын

Que buen canal que tenes. Me encanta! Me acabo de suscribir! Un saludo :)

@MachoNachoProductions 3 жыл бұрын

Thank you!! Cheers!!

@reksaiismaiwaifu578 4 жыл бұрын

the system looks great

@MachoNachoProductions 4 жыл бұрын

Thank you reksaiismaiwaifu! So glad you like it! Cheers!

@aryangavand5769 4 жыл бұрын

What are some good places to buy AGS 101's? Also great vid, keep up the good work

@MachoNachoProductions 4 жыл бұрын

Thank you Aryan! I actually never bought an AGS-101 due to the high prices. I would check out eBay. Some of the Japanese sellers on eBay have decent prices although it seems like they all went up recently. Hope this helps. Cheers!

@betoortiz243 3 жыл бұрын

@@MachoNachoProductions do you have any for sale I can buy?

@andrewbrooks2001 3 жыл бұрын

AGS 101 is the screen everyone is looks for. It was vastly superior to the AGS 001 Gameboys. Great video.

@SamuaX 3 жыл бұрын

Thanks for the video, it's really helpful! Quick question: do you need special double-sided tape for the ribbon cable?

@MachoNachoProductions 3 жыл бұрын

No problem SamuaX! The double sided tape is option but does help with install. You can even use some kapton tape instead of double sided tape as well. The double sided tape I use is 3M Scotch. Hope that helps! Cheers!

@ModNTech 4 жыл бұрын

Is your camera just really good or do you edit the colours of this? Haha even your mat looks stunning

@MachoNachoProductions 4 жыл бұрын

Haha, thank you CamoUchiha! I actually do some color-grading after I edit my videos to make the colors more vibrant. Cheers buddy!

@aiodensghost8645 3 жыл бұрын

@@MachoNachoProductions jts even better if your watching on an AMOLED display

@chudbabies 4 жыл бұрын

I like the hardware of the Nintendo 3DS. I like the software of Swapnote, Flipnote, I like the Korg Synthesizer, I like Rhythm Core Alpha, I don't know Basic Coding, but, I like the idea. What are the chances of ever getting hardware upgrades, to improve load times, and, graphics processing, audio engineering, wi-fi range... what are the chances of getting building an upgraded Nintendo 3DS? It's a really interesting hardware platform, if only it wasn't hindered by all the video-game software.

@MachoNachoProductions 4 жыл бұрын

Hey Chud! Thanks for the question. I think upgrading the existing hardware components that you are referring to would be very difficult. Unfortunately I am not a computer scientist or engineer so I wouldn't be able to improve many of those things, but it is interesting to think about. I hope you enjoyed the video! Cheers!

@WildVoltorb 4 жыл бұрын

This sounds like a stoner's idea

@HighDollarHobo 4 жыл бұрын

I recently received a 001 for free! The volume doesn't work.. If I figure that out maybe I'll update the screen someday 👍 good vid!

@MachoNachoProductions 4 жыл бұрын

That's awesome! One easy thing you could try is moving the volume slider up and down repeatedly for a little while and see if that solves the issue. A lot of the times, corrosion builds up on the contacts of the slider and causes it to lose its connection. Moving it up and down will remove that corrosion and potentially restore it. It's a long shot but it's easy enough to give it a quick try. Let me know if it works out! Cheers!

@michaelharris5281 4 жыл бұрын

Any luck?

@HighDollarHobo 4 жыл бұрын

@@michaelharris5281 saving it for future projects.. I have a ds lite to play gba games on also have a pretty decent back lit gba sp

@michaelharris5281 4 жыл бұрын

@@HighDollarHobo nice! I'm gonna subscribe to your channel! (:

@HighDollarHobo 4 жыл бұрын

@@michaelharris5281 I appreciate it. Maybe I will do video on all my old video games someday.

@jarod1134 3 жыл бұрын

Nice video 👍

@MachoNachoProductions 3 жыл бұрын

Thank you Jarod! Happy that you enjoyed it! Cheers buddy!

@Heru00 3 жыл бұрын

At 11:47, you can hear the click of the parts closing together, what a nice and unexpected ASMR 😍.

@MachoNachoProductions 3 жыл бұрын

Nice! Good ears!

@hristostefanov4009 3 жыл бұрын

This is some really nice work. Also one more question. Is the lens glass or plastic?

@MachoNachoProductions 3 жыл бұрын

Great question Hristo! I’m pretty sure it glass.

@epicdeadchannel 3 жыл бұрын

This is a great video. It helps go through all the steps for beginners. I have a question. When spray painting the shell how does one prevent it from getting into the speaker holes without using tape

@MachoNachoProductions 3 жыл бұрын

Thanks Logic Crash! I’m glad you found it helpful! When spray painting as long as you do light even coats, you don’t need to worry about covering the speaker holes. They will be perfectly fine. Just make sure your coats are very light, not heavy. I hope that helps. Best of luck! Cheers! P.S. Also just to be clear, I would strongly recommend removing the shell from the console prior to painting it and to also use primer.

@Cerber4444 3 жыл бұрын

Nice. I just bought two gba sp for really cheap.

@MachoNachoProductions 3 жыл бұрын

Awesome! Are they AGS-001's? If so, they are a perfect candidates for an IPS mod! Congrats on the purchase! Cheers!

@Cerber4444 3 жыл бұрын

@@MachoNachoProductions Yes, they are both AGS-001's. And I'm going to mod it with IPS as soon as I'll be back to work. Thanks for guide!

@MachoNachoProductions 3 жыл бұрын

You’re most welcome! Cheers!

@patrickstaubin6420 4 жыл бұрын

So you say the wire you used for the brightness mod came with the case you ordered? But magnet wire can be used interchangably? Very informative. Liked

@MachoNachoProductions 4 жыл бұрын

Yep! The wire that they included I found was a bit too short. So happy you found the video informative and thank you for the Like! Cheers!

@reesepufferson5619 3 жыл бұрын

Literally found this video exactly one year after it's release wow.

@MachoNachoProductions 3 жыл бұрын

Nice! Hope you enjoyed it!

@ScreenLight 2 жыл бұрын

awesome

@andresperez5430 3 жыл бұрын

Great video! I've never soldered anything before but I think this is a perfect one to try with. One question I have is, for the 28 AWG gauge wire, do you have to strip the tip of the wire before soldering it?

@MachoNachoProductions 3 жыл бұрын

Thank you Andres! If I remember correctly the kit came with a wire that was already pre-stripped so you didn't need to do it yourself. My only issue with the wire included was that I thought it was too short and made soldering a little tricky. If you use your own 28 AWG wire you will need to strip it yourself. I hope that answers your question. Best of luck! Cheers!

@andresperez5430 3 жыл бұрын

@@MachoNachoProductions Thanks for the quick reply and yes that answered my question.

@erictran3637 2 жыл бұрын

could you include a link to the shell you used? Love the video!

@akweasel2017 4 жыл бұрын

I don’t see any shells on Retro Modding’s website. Do you have any other sites you would recommend? Love your work btw. I’ve been watching your tutorials to do the job right =)

@MachoNachoProductions 4 жыл бұрын

Thank you man! I really appreciate that. I’m so happy you are enjoying the channel! I think retro modding is a bit backlogged, it may be a while before they have those shells restocked. I would check AliExpress, I think there are some sellers that offer pre-trimmed shells. I’d also check eBay but last time I checked I didn’t see any. Hope that helps buddy! Best of luck! Cheers!

@TehJellyLord 2 жыл бұрын

Idk if it is just my childhood rose tinted glasses getting in the way, but I swear the my GBA SP used to look as good as this mod does, but when I play on it today, it’s a really washed out and dim image. I will definitely be looking into an IPS display mod for my GBA as it is still the best way to play these games for me (my DS Lite has some serious ghosting issues with GBA games)

@SneakerD84 4 жыл бұрын

Great video! What was the game you had playing at 20:26?

@MachoNachoProductions 4 жыл бұрын

Thanks SneakerD84! The game is called Iridion II. I haven't played it too much but from what I've played it's quite fun! Cheers!

@abbanon 4 жыл бұрын

Recently discovered the channel, enjoying the content production quality. It's a shame the SP has its own proprietary headphone jack, and you need an adapter to convert it to the standard 3.5mm. Why not see if there are any internal mods to cover in the future?

@MachoNachoProductions 4 жыл бұрын

So happy you are enjoying the videos! That is a great suggestion! There are some videos on that topic but I would love to do my own! Cheers!

@shiftfire4511 4 жыл бұрын

@@MachoNachoProductions A good set of internal mods would be to add the audio jack, and a stereo speaker to replace the mono speaker built into the unit. It is entirely doable, and every Gameboy and GBA model were designed with Stereo in mind, but it's only possible through the audio jack due to Nintendo not including stereo speakers in any of their handhelds before the DS.

@Olie956 3 жыл бұрын

Ghosting, you can't unsee it. Lol.

@DogmaPromotion 3 жыл бұрын

Cool video! what was the name of the space shooter you try at the end? I used to love it but forgot the name :P

@charlesdelestre9973 3 жыл бұрын

It's IRIDION II. Looking for it too ;)

@DogmaPromotion 3 жыл бұрын

@@charlesdelestre9973 oh right I forgot about it!!! And there was also iridium 3d

@teshx9x9x40 4 жыл бұрын

I was thinking of this since I found my Old sp that still works after a decade of not charging WTF! lol but i mean u can get a pocket go 2 and have more options or an Odroid Advance but There's something about the SP even tho it's small I'd see myself playing it more then my rg300 and I don't know why. But the price I'd have to shell out for EZ flash too. But hey It looks good I might just have to get one and revive my Old SP and play some at Work ; ).

@MachoNachoProductions 4 жыл бұрын

For sure dude! Give the ol' SP some new life! Those emulation devices are great options too, they are much more flexible and can play other consoles! But there is something about playing games on the SP! Cheers bud!

@devinandrew2252 4 жыл бұрын

Consider restoring the SP and pairing it with am EZ Flash Omega. I just got it and love it! Gives you all the gba emulation in a cartridge.

@MachoNachoProductions 4 жыл бұрын

Devin Andrew it also allows you to play game boy, game boy color, and NES! It’s really fantastic! Cheers!

@boizalini9456 4 жыл бұрын

When installing an IPS screen, if I were to not connect the wire, how would the screen be affected? Would it stay on the brightest setting or will the backlight not turn on?

@MachoNachoProductions 4 жыл бұрын

I believe it will stay at the default brightness. In my opinion the default brightness is plenty bright. The wire only enables dimming function and is completely optional. I hope this helps! Cheers!

@ekojar3047 2 жыл бұрын

If the Gameboy mod Community had a professional football team, they would be called the Tri Wing Screwdrivers

@nova--minecraft 3 жыл бұрын

I really liked the video! But I'd wish for more music. It annoyed me a little bit that you played the same song over and over, and I believe there are great songs for this retro feeling you wanted to represent here. But all in all, great video!

@MachoNachoProductions 3 жыл бұрын

Thanks for the feedback Nova! Will definitely be looking to get more musical variety! Cheers buddy and happy holidays!

@largegrape9134 Жыл бұрын

What an intro!!!!! I almost creamed my pants, but damn pls boost your mic you're too quiet 🤫 😅

@kieranwilliams9044 2 жыл бұрын

what temperature should my soldering iron be? just because i have one where u can adjust the temperature

@WildVoltorb 4 жыл бұрын

Oh this needs an all metal case

@MachoNachoProductions 4 жыл бұрын

Oh man, I wish! Hopefully someday that will happen! Cheers!

@Vendzor 4 жыл бұрын

Could you imagine an aluminum shell? I'm sure it could be done.

@MachoNachoProductions 4 жыл бұрын

That would be amazing! Let hope we get one some day!

@dav3yb 3 жыл бұрын

It'd be neat to see an aluminum shell for the GBA SP but in the form factor of of a DMG/Color. Would take away the need to have a complicated hinge or need to fish a thin cable through somewhere.

@MachoNachoProductions 3 жыл бұрын

Totally agree! That would be absolutely amazing! Cheers buddy!

@spirou7045 3 жыл бұрын

I made so many mistakes replacing my shell wish I'd seen your vid

@jackmanatawa5212 3 ай бұрын

Is it necessary to solder the cable for the light button? Is there a touch functionality which enables different degrees of light?

@ErenBR562 Жыл бұрын

Hello, on my C67 it seems that the solder doesn't stick, and it doesn't have that golden thing like in your video, do you know what it could be? Thanks!

@sergeyvoznyuk1176 3 жыл бұрын

Looks time retro modding doesn't sell the pre cut shells anymore :( Do you know where else I could get a similar quality shell?

@HydroSheep 3 жыл бұрын

how's the battery life with the ez flash? i heard it uses a lot of battery

@MachoNachoProductions 3 жыл бұрын

That’s a great question! It does shorten the battery life especially when compared to a normal game. Cheers buddy!

@PhilDPino 2 жыл бұрын

Are the IPS screen dimensions the same as the original? The 4 screen side by side he showed towards the end looks like the output is wider.

@mazifrisc435 2 жыл бұрын

Does it still work without soldering? Cause i neither have soldering items , and also i never did it. Maybe i will do it later after installing it if i can.

@Freeenkify 3 жыл бұрын

I have a GBA SP AGS-101 model but I don't remember that it felt like this by setting the volume to maximum .. but the audio volume does not seem very high to me is this normal ? or are the capacitors like the Pc Engine GT ?

@carlgaebe8699 2 жыл бұрын

Hey thanks so much for this man! Links still work okay? I'm gonna order everything i need today : )

@MachoNachoProductions 2 жыл бұрын

They should work, let me know if you have an issue.

@sethjones5726 3 жыл бұрын

I just bought one on eBay for $180 already modified 🙂

@MachoNachoProductions 3 жыл бұрын

Awesome! There are a lot of great builders/modders out there! I’m sure you’ll be very happy with the updated SP! Cheers bud!

@shmeebsnaggle6315 4 жыл бұрын

Hi, looking for some help please! I put a new shell on my SP, and soldered the wire and it all went very well... except the buttons need to be pressed really hard for some reason. I put the original buttons and rubber grommets back and it still happens. Could it be a faulty shell? I cleaned everything numerous times and checked everything I could think of but nothing works..

@MachoNachoProductions 4 жыл бұрын

Hmm that’s really strange. one thing you could check is that the membranes are aligned correctly. Sometimes during reassembly they can shift. If it’s not that it could be a faulty shell. Also you could check to see if the PCB is properly seated in the shell. Other than that I can’t really think of anything else. I hope this helps and that you resolve the issue. Best of luck. Cheers!

@mikeydubs_tv 3 жыл бұрын

What do you think about replacing an SP AGS 101 screen with an IPS and then using the 101 screen for an OG gameboy advance? Is this a good upgrade path?

@lars-fenin 2 жыл бұрын

i´m think of update my ags 001 with an ips display. how is the battery life compared to a normal sp.. (like in mid setting , not nthe brightest f.e)

@Pedro-do-Canada 28 күн бұрын

This isn't my first time modding a console and this video was very helpful, but my screen keeps changing the brightness level randomly by itself... I've desoldered the wire and made sure there's no bridging on the board, but the issue persists (brightness changes in random intervals). My soldering seems fine and the brightness button does work, so I've contacted FunnyPlaying's support to return the IPS kit because I'm pretty sure I received a faulty unit... I'm also applying to return their cheap transparent shell that broke off on the right hinge after literally a handful of times opening and closing the GBA. I feel like I got ripped off 🙂