EASIEST WAY TO SET UP A CO2 LASER ROTARY! ITS FOOL PROOF!

Рет қаралды 20,928

Жыл бұрын

Hello!
On this weeks episode I’m going to show you how to set up a Chinese rotary with your CO2 Laser!
Enjoy!
Link for Rotary : amzn.to/3FVq4Yh
CO2 Laser : Monport 60 Watt. Use code CG6 to save 6%
LA Awesome Cleaner : amzn.to/3HR6Fce

Пікірлер: 23

@7005r Ай бұрын

This video saved me a ton of time. Settings were not perfect but close enough to give me a good head start. Thank you.

@timbertony7442 Жыл бұрын

Hi ,Thank you for your video, it is very helpfull. I Want to start engraving tumblers ,I have a 100 watt senfeng laser ,with the same rotary device.but I'am not sure what the focus height should be.?

@michaelenglund 8 ай бұрын

Hi, Thanks for the vid. Unfortunately I can't hear nor see the settings you did for the Y accelaration box.

@SavetheRepublic Жыл бұрын

How's the Monport been working? I'm looking at a 100 watt but I'm nervous as all hell to pull the trigger but I really like that it has a built in chiller.

@josegarza6083 Жыл бұрын

Good Video!

@fredbrandenburg6700 21 күн бұрын

Hello awesome video, we keep getting a frame oversized error any help greatly appreciated thanks much

@tinarichardson8085 Жыл бұрын

Great video. I have the same laser you have and have been looking for an affordable rotary. I want the piburn but very expensive. But I want to engrave handle tumblers. How’s your rotary working? I’ve read some having motor problems? I’m looking for a chuck style.

@tinarichardson8085 Жыл бұрын

Can you do a handled cup on the roller style? It looks like it will accommodate longer items than the chuck. What made you choose this over the Omtech model?

@jigsawinventions Жыл бұрын

I follow the same setup for my Omtech polar. Issue I am having is the framing is off. I did my step calibration, I selected current position to middle like you did, slowed down the speed. When I frame the work, it is not aligned where I want it to be. Any ideas?

@timetempest 10 ай бұрын

im also having issues with framing being way off and the roller rolls forever before doing anything. its so strange.

@thomasbohm8753 Жыл бұрын

Do you stretch the image 10% to give it a more round look on the tumbler?

@customgrains Жыл бұрын

I do not!:) I keep it as is!:)

@Messic0 3 ай бұрын

Are you changing steps per rotation on different containers?

@customgrains 3 ай бұрын

Negative:)

@yoy0whatup 8 ай бұрын

good morning @customgrains I am following all the steps as described, but when I hit start and the machine starts engraving, the design is engraving with the height of the design compressed. Ex: my design is W: 3" x H: 6.25" rotated 90 degrees (just like you have it on lightburn). The preview looks fine/normal. But, once it starts engraving, the design is engraving with the Height much smaller than the indicated 6.25", the image is coming out "squished", without any size changes being made on lightburn. any thoughts? @customgrains

@bzharris82742z Жыл бұрын

How did you configure your cutting order to minimize y axis moves?

@customgrains Жыл бұрын

When you enable the rotary it disables the y axis and essentially make the rotary wheels the new Y axis. If that makes sense

@bzharris82742z Жыл бұрын

Yep, got that. Your cut moves from the left of the image to the right. My image is an "O" with design/text inside of it. Lightburn wants to trace my "O" then fill in details inside and doing that the cup shifts slightly skewing the image.

@customgrains Жыл бұрын

@@bzharris82742z do you have “optimize cut” or “flood fill” on?

@bzharris82742z Жыл бұрын

@@customgrains running 1.2.02 Most of the design is lines, so fill options are not enabled I am using optimize cut path on laser menu settings

@bzharris82742z Жыл бұрын

@@customgrains I am using a vector file. I am pretty sure that is the issue now that you made me think it through.