Lawn Mower Blade Sharpener: amzn.to/3yHqc6O As an Amazon Associate I earn from qualifying purchases.

I’ve had one of these for a couple years. And been using it wrong for a couple years. Thanks for doing this!

Awesome info, great video!

Having declared my dissatisfaction with this sharpener last night kzfaq.infoUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ I thought about the problem some more. It occurred to me that I might be undoing each attempt at achieving a sharp edge by the repeated attempts. So, I tried to clean up the unsatisfactory result by honing with only positions 3 and 4.Miracle!! A really nicely sharpened chef's knife, more than enough to handle my needs. Admittedly, it did not reach professionally sharpened razor-fineness, but it is now significantly sharper than it was. A bout of breaking down carrots convinced me. So, major apologies to the manufacturer, Amazon, and all happy and potential owners! Follow the directions: don't buy it if you have ceramic blades; and don't overwork your knife blade.

Thanks for the video. The blade can possibly be secured to something with vice grips.

Thanks! Ordered one. Seems much easier than taking blade into a shop and cheaper than ordering a new blade. Just to state the obvious; safety glasses a good idea when using this.

Bro get yourself a used vice. They are cheap. You deserve it and your worth it

Great video thank you

My same exact setup 😂

Tried with cordless drill and stone caught blade so hard it backed out screw out of stone. Worked great with old standard corded drill. Anyone else have this problem ??

Great video man! Doing it!

Neat-O and now I know! TY

Awesome Dethatcher

worked perfect on my electric mower blade.

Great video. Could it be used to sharpen an axe

What do ya know. I have one of those. I don't remember how many years I've had it. I can say I've only used it a couple of times (shame on me). Now all I have to do is find it. I'm pretty sure I saw it in the last week or so as well.

I tried this product but the stone and guide kept grabbing the blade and forcing a stop to the spin. I tried lighter and lighter touches, differing angles, etc. and I just could not get this to work. In order to sharpen the blade you have to find that position that will allow the grinding wheel to do its work as you work it up and down the cutting edge of the blade. Tried it both in a vise and hand holding it. For me, it was a fail. Went back to my angle grinder which has worked better for me.

Just got this today and it worked like a charm. Much easier with a C-clamp.

Interesting. I just purchased one of these this morning and found your video. Also interesting, the reviews are close to 1200 (not sure when you purchase your stone). Always protect the hands. Also, this was a good time to clean the bottom of the mower.

Corded quarter inch drills are cheap and have several times the RPM of the battery drill you are using. It will make sharpening that blade a lot easier and quicker.

Thanks for the video. Please… ALWAYS promote/instruct safety (i.e. gloves, eyewear, remove fuel before tipping mower, etc.).

Useful info, but do you have any advice on how to sharpen kitchen knives? I’ve got some which just aren’t sharpening any more using one of those kind of sharpening “sticks”. Do you think your lawnmower blade sharpener would work or is it too big?

The nail on the wall by the professional at ACE hardware store is not reliable at all but the tool is pretty cool, thank you.

Where can I get the power hand drill? Could you put a link possibly for Amazon for the hand drill because I need to get one of those too. Thanks a million!❤

Tighten that bolt to spec! What you did will come off and take your feet with it

or a vise

Can’t believe you still have a blue ryobi battery

I use it and my blade stays sharp as hell till August

Everyone, please wear a work glove when handling any blade.

A vice would have been nice !

Okay product but it will come the stone will eventually come loose. I suggest using a washer between the screw and the stone to keep it secure.

First thing you need to do depending on the type of mower you have is make sure your battery is removed, it's unplugged or your spark plug boot is pulled off. Don't trust the fate of your fingers to the assumption that shit will always work as intended.

I know this video is older but do you need to remove the blade to sharpen it? ..

Great video. I would suggest leather gloves when handling the blade. Especially when holding the blade to tighten or loosening the bolt to the mower. I have been using a dremel but I think I will get this. It looks easier.

Why does it matter that the blade is even cuz I just sharpened my lawnmower blade and it’s the same one as the video and I did it with without this tool because I don’t have it, so does it rlly matter if it’s even?

I got one but compared to using a flap disk on an angle grinder, these things are pathetic

Sorry, years ago I tried a tool like this. It would take me HOURS to get the blade like that. I suppose if I sharpened the blade weekly, but who has time for that? If I *were* to use something like this, I would certainly clamp the drill and move the blade.

Costs $6.99 and over $8.00 to ship. Still cheaper than the lawnmower repair shop

The blade is not balanced with the nail or hook in the wall because it’s not mounted Centre

no, you shouldn't have it in a C-clamp. you should have it in a bench device

What’s the name of the song in the background please

No gloves? damn

Anyone try this with a Dremel?

Take a few minutes and clean the bottom of your mower.

An do not hold in your hand

unlike this guy, use a bench vice or clamp it tightly to a strong stable surface

Very dangerous no gloves no impact lens

Why does the title say ONLY $3.99 when it's $6.99. is that what they call CLICK BAIT???

Good thing I bought an electric mower Gas just hit hit 6 a gallon because of putin I support the current thing

Get some gloves bro !!

Bought them and they kept coming apart and unscrewing...piece of crap stone. All the other tips were great. Just the product sucks, but not your fault.

Will is a cutie.

Product Is Trash. Set Screw Becomes Loose And Won't Tighten Back Up. Waste Of Money. Kool Story Thought.

I see 2 teslas in your garage you can afford to have your grass cut.

Change your title to $7 like you show in your video - not $4 - that's a great way to get a thumb down

Four number one go are low-power then to a gas push mower to get the job done you will have to sharpen everyday to use that dumb sharpener support local stores people's jobs

Believe in Jesus Christ and ask him for eternal life be blessed