Easily pause, restart or recover your CNC job - also how to split your job into 2 parts

Рет қаралды 12,803

Жыл бұрын

Want to recover a staled or failed job? Want to pause a job a restart another day? That is what we are covering in this episode. Showing you a simple method to pick up where you left of on a cnc job and maximise you success of finishing the work.
ncviewer.com/
If you want to become a patron for one to one help, early video access and quarterly giveaways then head to / jamesdeandesigns
If you want to help the channel but do not want to become a Patreon, you can contribute directly:
www.paypal.me/jamesdeandesigns

Пікірлер: 49

@JamesDeanDesigns Жыл бұрын

I will be doing a follow up video to this showing an even easier method in certain pieces of software like UGS, Openbuilds, but this is a generic method for everyone

@jonathancoan2119 5 ай бұрын

were you able to do a new tutorial on this using those othjer programs

@Iggyshere 15 күн бұрын

Thanks for sharing this tip. I accidently pressed the stop button during a job on my 3018 pro.

@OccasionalWoodcraft 9 ай бұрын

About to start a 6 hour job. This is exactly what I needed to see! Now the neighbours might not kill me

@EirikBrandalf Жыл бұрын

The right video at the right time! I was slowly going through all your videos anyway, but this answers exactly what I've been wondering about for a while (with a while being the three measly days I've owned a CNC machine).

@JamesDeanDesigns Жыл бұрын

Glad its helped 👍

@thisoldman7142 Жыл бұрын

Great video. Real, usable information. I will be watching this one several times and taking notes. Thank you.

@JamesDeanDesigns Жыл бұрын

Thank you

@mkrcbuilds 6 ай бұрын

Ha.... Wish I had know about this a few days ago... Saved the link as a shortcut so now I have it just in case I have that issue again... Thanks so much, Your tutorials and video's are what convinced me to actually buy my first 3020 Max Pro. I have to say I'm having a blast with it already.

@JamesDeanDesigns 6 ай бұрын

Yes it's one of those things that most people don't know about until it's too late. Glad you're enjoying your CNC :)

@tektrixter Жыл бұрын

Tip for more complex gcode : If you can measure how deep the cnc was cutting before failure you can search for the G1Z command with that depth, then back up one pass. For example, if it stopped at 3mm cutting depth you can search for G1Z-3, then scroll up to the last G0 or if you know each pass is 0.2mm search for G1Z-2.8. This works as long as the gcode moves the Z axis separately from the X and Y (eg 2D and 2.5D).

@JamesDeanDesigns Жыл бұрын

Very useful addition. Thank you 👍

@MetalanGrain Жыл бұрын

This literally happened to me yesterday and I had to restart the whole project 😂 didn’t know how to continue from the paused job

@melissal7984 Жыл бұрын

Thank-you so much for doing this video!

@jerodjerod 4 ай бұрын

Great video and tips. Thank You, James!

@allraw 5 ай бұрын

Great Just helped me out with my job here! thanks a lot

@fossfix Жыл бұрын

Great information as always and thanks for sharing.

@JamesDeanDesigns Жыл бұрын

Glad it helped

@richardsandford1607 Жыл бұрын

Excellent!! Thank you!

@zmanfishing3361 Жыл бұрын

Great Info as always. Thank you.

@JamesDeanDesigns Жыл бұрын

Thank you

@Roxann-gz3yg Жыл бұрын

im pleased i started following you your very in formative and as i found the other day when i had problem with my cnc your very helpful as well

@JamesDeanDesigns Жыл бұрын

Excellent 👍

@paulvanwagoner7273 Жыл бұрын

great tip, thanks, could have used this tip awhile ago for broken bit issue.

@henrymach 7 ай бұрын

That's interesting. I usually just restart from the beginning and see the router cutting air for some time. It's less work but takes more time to finish. UGS can edit the GCode and start from any point but I never bothered.

@JamesDeanDesigns 7 ай бұрын

Yes so at the point I did this video I actually found a bug in UGS s "Starr from" feature which is why I didn't show it I'm the video. After I raised it they have now corrected the issues making life much easier, you just literally say start from line XXXX and it does all the hard work for you

@benoit7699 Жыл бұрын

openbuild is great for starting in the middle of a program. we just right click on the line we want and we restart easily where we want.

@JamesDeanDesigns Жыл бұрын

UGS and CNC Commander has the same thing as well. I'll be doing a follow up video showing the in-software options to achieve it

@masahiko7362 4 ай бұрын

Hi, James, Great video and tips. Can candle soft do the same thing?

@4ranklin1 Ай бұрын

Very useful information thanks. Is it possible to cut big jobs up into smaller pieces as well?

@Shorrey 11 ай бұрын

Fantastic! Thanks! Didn't need it by now, but it is a matter of time when i will. Good to know! But if the board was displaced somehow, and you cannot put it to the same spot exactly, there is nothing can be done, right?

@alhum5542 11 ай бұрын

Needed this 3 days ago. My router stalled because RPM was set too low, had to do a emergency stop. Had to start the job from the beginning. Took an hour before it engage wood to cut. I try out the NC viewer but it won't show my tool path when I hit the plot button. Gcode was created by Vcarve.

@charithdamidu4932 10 ай бұрын

super

@OldGreekCinema 10 ай бұрын

Hi James, Is any rotary Axis upgrade kit in the market for this model?

@gonzoribbons Жыл бұрын

Extremely useful, and clearly explained. Thanks James. Question, have you any idea if there has been a pendant with mechanical jog wheel ever been available for machines such as the Sainsmart Genmitsu CNCs? A while back one was made available for duet machines such as the workbee by an extremely resourceful hobbyist. These would be a superb addition to so many hobbiests. I know there are remote apps for phones, but nothing beats a physical jog wheel for positioning.

@JamesDeanDesigns Жыл бұрын

The only Sainsmart machine I know that can handle a pendant is the 4040 Pro. What I found a little odd though was Sainsmart discontinued that pendant before releasing the 4040 Pro so essentially they released a machine with the pendant feature but no pendant to actually make it work. Other on the market may work but as I have never used one I am not really in a position to suggest any that may work

@gonzoribbons Жыл бұрын

@@JamesDeanDesigns thanks James

@williambanks7519 5 ай бұрын

Good day sir! I noticed that you are you a Dewalt router with your machine. I was wondering if that router (Assuming its the Dewalt 611) can be used in the FoxAlien Masuter Pro? Thank you for all your work! It's because of your videos I haven't chucked my FoxAlien machine in the bin!

@JamesDeanDesigns 5 ай бұрын

It needs the 69mm holder, I can't remember if the Masuter Pro comes with that as standard. I think it does though, if not the holder can be purchased separately. Glad my videos have helped 😁

@Paulscnccreations Ай бұрын

Can you do this in ugs or do i need to use the same software as you are using.

@kevinkirk9479 Жыл бұрын

Hi James. Great video. Once you have identified the line you want to start from, could you use the "Start from" command in UGS? Cheerx Kevin

@JamesDeanDesigns Жыл бұрын

😆 well... my video was meant to be based around that function and not deleting code....however I found a glitch in UGS which they are now trying to fix so there will likely be a follow up to this showing how to do it in UGS using that function

@kevinkirk9479 Жыл бұрын

@@JamesDeanDesigns look forward to part 2

@michaelmessuri7746 Жыл бұрын

silly question but how do you deal with the z height (when you restart) if you use a z-probe? Do you have to re probe the z height at the original location you used before starting the original cut, or is there some grbl method that can be used to first read the settings you used [obviously before the power outage or stopage] and the re-enter those setting [I use the sainsmart gcode for using their z probe]. as a side note, to figure out the lowest point of the material I borrow from my 3d printing process and use a 6x6 (or greater) probe grid so I have recorded the actual z height that was calculated by the sainsmart macros so i guess I could probably use a portion of that code and figure out how to manually set that data inside of UGS platform

@JamesDeanDesigns Жыл бұрын

If you have gone about setting your job up correctly (eg. homing and z probing) then you would do what I have done in the video which is after it stops, essentially just rehome, return back to your start point and run the z probe again before loading in the edited Gcode file. Usually I try and run the Z probe on a part of the material that is not going to be machined and therefore can always re-probe that spot if the job fails. If you are machining the entire area then I often run the Z probe on a scrap piece of the same material next to it or you can potentially Zero off the bed instead

@michaelmessuri7746 Жыл бұрын

thanks..I missed the part of you re-zeroing the z axis with the probe. thanks for answering me

@pethuds 11 ай бұрын

Can you use this when laser engraving.

@JamesDeanDesigns 11 ай бұрын

The principal is the same, you'll looking for the lines of code that essentially turn the laser on/off and you'll want to aim for one of those

@pethuds 11 ай бұрын

@@JamesDeanDesigns Hi James I have tried it on a laser engraving file and it just shows gibberish in the g code viewer. Is it because it is png file do I need to change some settings.