Eastonmade; FASTEST HYDRAULIC LOG SPLITTER 24D DIESEL POWERED

Рет қаралды 28,059

2 жыл бұрын

The Eastonmade 24D is the fastest hydraulic log splitter commercially produced today. 24 Tons and a 3 second cycle time will get your wood done fast. Multiple wedges are available and prices are listed on our website.
Thanks for all the feedback and support folks. It's very much appreciated. It's great that we are building such a strong community around our products where everyone can share their ideas and thoughts. Hit the like and SUBSCRIBE button if you haven't done so yet and I'll keep you in tune with what's going on in the firewood industry. Hope to see you all on the next one!!!
Give us a call for more information!!!
613-812-3213 Log Splitter Sales/Service
Check out these awesome KZfaq Channels!!!
Like our videos? Check these guys out!!!! If I missed you and you want your channel on the list drop a comment below and I'll add it on the next video.
Eastonmade Ultra
Glenn @oldschoolmillenial / oldschoolmillennial
Chris @inthewoodyard / inthewoodyard
Joe @joesfirewoodvideos / joesfirewoodvideosii
justin @lifesapprentice / @lifes_apprentice
Eastonmade Axis
Buckin billy @buckinbillyray / buckinbillyraysmith
Joe @ohiowoodburner / @ohiowoodburner
Adam @hometownacres / hometownacres
mike @KNLfirewood / @knlfirewood
Gord @gpoutdoors / gpoutdoors
Dan @armsfamilyhomestead / @armsfamilyhomestead
Brittany and Francis @BandFFirewood / @bfoutdooradventures
Neil @neilkochdigdriveDIY / @digdrivediy
Eastonmade 5-11
Gord @GPoutdoors / gpoutdoors
Eastonmade 9-16
Ben @survivingcountrylife / @survivingcountrylife7069
Paul @williamsonridgeoutdoors / williamsonridgeoutdoors
Eastonmade 12-22
Harry @thedriftlesshomestead / thedriftlesshomestead
Chuck and Deb @ironandoaksawmill / ironoaksawmill
Brade @savagefirewood / @savagefirewood
Reuben @earthandbloom / @earthandbloom
Todd @struckacordfirewood / @toddpac1
Eastonmade 22-28
Gord @GPoutdoors / gpoutdoors
Doug @offgridwithdougandstacy kzfaq.info?searc...
Eastonmade 22MB
Chris @inthewoodyard / inthewoodyard
Eastonmade 48C
Kevin @skidderkev / skidderkev
HTTPS://www.eastonmadewoodsplitters.com
#Logsplitter #firewood #logging #treecare #arborist #chainsaw #sawmill #forestry #homesteading #offgrid #heavyequipment #firewoodprocessor #logger

Пікірлер: 184

@bubbakemp5817 Жыл бұрын

That machine is a BEAST!

@meandmytools9819 3 ай бұрын

oh yes! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) kzfaq.info/get/bejne/ptd_pNKanaypmKM.html

@edfeldpausch7169 2 жыл бұрын

Wooooo hoooo I got WOOD... to run through that thing Andrew 😆 😂 what a beast.

@EastonmadeWoodSplitters 2 жыл бұрын

Its awesome. You're gonna love it

@ssprofirewood Жыл бұрын

That is an unbelievably fast cycle time. Looks like an awesome diesel splitter. Great job, Andrew!

@meandmytools9819 3 ай бұрын

Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) kzfaq.info/get/bejne/ptd_pNKanaypmKM.html

@douglasdonegan9372 Жыл бұрын

I need one with the box wedge ...sweet machine.. I'm saving for it 💪time is money 💰

@Wild_Bill57 2 жыл бұрын

That’ll be a godsend for all all the guys who are in and out too fast.

@InTheWoodyard 2 жыл бұрын

Wow, watch out fingers! That is faaaaaast!

@sawingwithsandy 2 жыл бұрын

That’s a piece of equipment worth using right there! Great job on that one Andrew. Seems like lots of experience and expertise has gone into the design

@WilliamsonRidge 2 жыл бұрын

Man, Andrew, that splitter wore me out watching it, that machine would keep 2 or three people hoping! Amazing!

@CorkeryCoop Жыл бұрын

When you started the Diesel engine up, I thought, ‘Wow! That sounds like my tractor!’ And then you mentioned it’s a Kubota engine. I looked it up and the reason it sounds like my tractor is because it’s the same engine; the D902. It’s a solid engine and a good choice. What a great machine!

@EastonmadeWoodSplitters Жыл бұрын

Theyre a nice engine. Appreciate the feedback

@TCsOutdoors1 2 жыл бұрын

That things insane!! I could split all the trees in my county in a week with that bad boy! Nicely done Andrew you continue to evolve and drive the firewood industry into the future , truly impressive.

@meandmytools9819 3 ай бұрын

Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) kzfaq.info/get/bejne/ptd_pNKanaypmKM.html

@GPOutdoors 2 жыл бұрын

That is crazy fast Andrew! What an awesome machine. Congrats to you and the team. Cheers!

@Z-Bart 2 жыл бұрын

It's okay for you to ramble Andrew. You're The Boss! Great Machine.

@joeshaffer2506 Жыл бұрын

Another awesome video and machine I have message in to the office on 12/22 with the extra box wedge on a price for over here in the state’s ( northern Ohio) been couple days I’m sure y’all are busy keep up on all the videos and have a great day

@boohanlon3305 Жыл бұрын

I need to win the lottery so i can afford one of your splitters. Such high quality and loaded with features, Makes my rammsplitter look like a box store unit. 😪

@bwillan 2 жыл бұрын

I was concerned that the conveyor couldn't go fast enough to take the wood away from the splitter. 😜 That is ridiculous how fast the cycle time is on that 24D.

@concernedcitizen3651 2 жыл бұрын

Kool machine...Big fan of the Kubota engines.

@KNLFirewood 2 жыл бұрын

When I hit the lottery, I’m gettin’ one of those. Wow! So fast. Nice job Andrew!

@padraigdaly9780 2 жыл бұрын

Very impressive you set the standard when it comes to the best log splitters from paddy in Ireland 🇮🇪

@johncollins500 2 жыл бұрын

Watching you using pickaroon thought came to me. Wow an Eastonmade pickaroon has a nice ring to it!!!! Lol. Great content Andrew.

@stevehulsey4663 Жыл бұрын

looks good . suggestion on conveyor axel make it capable of wheels to have a 90 degree angle . right left piles

@thefirewooddoctor 2 жыл бұрын

Would be awesome to see the 24D uses as the base for making the 24DP for "diesel processor". Aka add on a cutting section to convert it into a processor for the small stuff 10in and under.

@meandmytools9819 3 ай бұрын

Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) kzfaq.info/get/bejne/ptd_pNKanaypmKM.html

@rllong57 2 жыл бұрын

Awesome videos Andrew .... keep up the good wood !!

@stevesedgwick5789 2 жыл бұрын

Fantastic, you’ve got everything right on that machine, technology, power and cycle speed. Good job!

@brianrizzi6321 2 жыл бұрын

I hope piston pumps take over the industry. Then quantity of scale will make them less expensive. Thanks for hopefully starting a trend Andrew

@waynetharp 2 жыл бұрын

😮😮😮 WoW!! 😮😮😮

@davidedwards3734 2 жыл бұрын

Love that splitter. Have a Safe Day

@peteanderson1714 2 жыл бұрын

wow says it all

@peterdavis7615 2 жыл бұрын

That machine is just a beast!!

@TheHobbyShop1 2 жыл бұрын

What a beast! 👍🏼

@oakrunacres2564 2 жыл бұрын

Awesome.....Just awesome! Dave

@bryanbrower96 2 жыл бұрын

That machine is awesome! Can't wait to see what you come up with next!! Take care Andrew an try not to work too hard 👍👍

@hearsayhenderson2623 2 жыл бұрын

I love your style

@samskeeter1 2 жыл бұрын

Definitely 2 men required on this machine.

@bentwedgestanleybrand5818 2 жыл бұрын

Hello Andrew, looks like you got a really fast one there great job! Keep up the great videos. I like that elevator

@johnandcarolynmills3061 Жыл бұрын

Thanks, Andrew, That's a sweet running unit, Wait till Chris from the Wood Yard get a look at her. PS You make us all Proud.

@russbatzer6970 2 жыл бұрын

Dang, that's an incredible machine! & i want 1! 💯👍

@fralin1966 2 жыл бұрын

Great to see you back posting !this is one hell of a machine for sure .

@EastonmadeWoodSplitters 2 жыл бұрын

Great to hear from you tim!!!

@andrewsamanthamadison3320 2 жыл бұрын

D*** that thing is fast! You can drop your gym membership after buyin this thing! Good smokes that’s a sick machine!

@obiorah1 2 жыл бұрын

The 24d kicks ass, the 6 way wedge excellent, the recycle time 3 seconds that’s insane,

@James....... 2 жыл бұрын

That's awesome!

@shawnkasuboski4147 2 жыл бұрын

Wow that's amazing and I thought I ordered the top of the line with the 37d I understand that's even faster!!! That is bad ass!

@earthandbloom 2 жыл бұрын

I agree with @thedriftlesshomestead, Ill be looking to upgrade our 12-22 to that 24D!

@jacobdavis1752 Жыл бұрын

Incredible

@redeagle6842 2 жыл бұрын

Very impressive machine. Take my money and I’ll give you my first born if you want her! That thing flys. Great video Andrew.

@stevenhall1097 2 жыл бұрын

Nice looking splitter Andrew.

@mitzihodges497 2 жыл бұрын

wow so awesome

@andychristopher3887 2 жыл бұрын

That is amazing fast splitter

@nickferguson131 2 жыл бұрын

Looking goods Andrew!! Woo woo that's fast! 😎 When's my ultra ready? 😆 Cheers!

@TheDriftlessHomestead 2 жыл бұрын

That is one wicked fast machine. I'm going to start a 24d fund. Keep the videos coming.

@EastonmadeWoodSplitters 2 жыл бұрын

Sounds great harry. Really appreciate the support

@wyliefox5518 2 жыл бұрын

Man that thing is awesome can't wait till I get my 37D

@EastonmadeWoodSplitters 2 жыл бұрын

You're gonna love it. The 37d is a beast

@hingstonia 2 жыл бұрын

We are going to need one of these here in the Ottawa area with all of these downed trees.

@EastonmadeWoodSplitters 2 жыл бұрын

I have lots of wood to split now!!!

@chrismartin4776 2 жыл бұрын

I think with a box wedge it would look like a sowing machine. - flying back and forth.

@ishure8849 2 жыл бұрын

G'day Andrew, that thing not only needs a conveyer on the out feed it needs one on the in feed also 👍.

@SasquatchBunyan 2 жыл бұрын

That is beautiful. That speed is perfect. Burn it!

@toddpac1 2 жыл бұрын

Looks good you know I am old right, you trying to kill me with those times

@Slaughterk360 2 жыл бұрын

Sick

@fricknjeep 2 жыл бұрын

hi there nice splitter like the diesel john

@jasonherron6075 2 жыл бұрын

Hey Andrew, awesome video as usual.👍🏻. I'm trying to convince dad to trade his 12 - 22 in one a 24D, but we shall see...🤞🏻🤞🏻. Keep the awesome content coming. Be safe ans take care!

@EastonmadeWoodSplitters 2 жыл бұрын

Appreciate all the support jason. Tell Ricky i said hello

@VideosByAl 2 жыл бұрын

I was going to use the word WOW, but that might be too conservative. So I’ll put this 😳 .

@BertsCustomCuts 2 жыл бұрын

I really could have used a fast splitter like that this last weekend.

@jimmydill474 2 жыл бұрын

Another awesome machine Andrew! Have you experimented with using an accumulator to increase return speed? It probably wouldn't make any difference on something as fast as the 24D but maybe it could on smaller more economical models. A factory I worked at used banked accumulators on their presses to move a one meter diameter piston at speeds similar to the 24D, fifteen strokes per minute.

@EastonmadeWoodSplitters 2 жыл бұрын

You're right on with that jimmy. The only issue os the back pressure the accumulator adds to the cylinder. I think what you would gain in speed you would loose in overall power.

@josevelasco3245 2 жыл бұрын

That’s kinetic splitter speed…wow! On another note what happened to your trusty LogRite hookaroon?

@jimmieburleigh9549 2 жыл бұрын

Slow the lift table down and put a box wedge on it. Looks like it would get hot how it's set up by the operator position.. That fast cycle would be good on the axis.

@EastonmadeWoodSplitters 2 жыл бұрын

Fan on the engines draws through. Appreciate the comment

@clarkharms 2 жыл бұрын

The axis is fast enough, fingers are close on that one and you are balancing on one foot whilst the other is operating the hydraulic foot control. Would not take much loss of attention or unleveled ground to lose a digit or 3.

@n3qdz 2 жыл бұрын

You had me at glow plug......

@EastonmadeWoodSplitters 2 жыл бұрын

Lol

@gerryspang5917 2 жыл бұрын

Looks like another home run for Eastonmade. Would the engine on the splitter have enough capacity to power the conveyor as well, just a thought, 2 types of fuel brings chance of putting wrong fuel into either machine.

@EastonmadeWoodSplitters 2 жыл бұрын

Yes it is possible

@clarkharms 2 жыл бұрын

Do you expect to be putting piston pumps on your gas powered splitters? Seems that pump style is what takes the splitter to the next level.

@EastonmadeWoodSplitters 2 жыл бұрын

Likley not. The cost is just to much to do on the gas machines

@brianfletcher7942 2 жыл бұрын

Gonna have to get a few loads of gravel brought into the wood yard like Chris just did in his woodyard to mitigate the mud😂

@EastonmadeWoodSplitters 2 жыл бұрын

Lol gotta do something. I have no shortage of it. We are planning on expanding the shop into the wood yard next summer.

@bendugas8632 Жыл бұрын

On your conveyor, why don't you have a power beyond valve on your splitter valve going to another valve to raise and lower the conveyor and power the belt?

@frontyardfirewood Жыл бұрын

Quick question, would that conveyor be able to be hydraulic powered from the splitter? Thus saving the second engine and fuel cost for the conveyor? Just was wondering, if the conveyor would cut out as the splitter does the power stroke, and then on the react conveyor would move? Or just run 24-7 but at a lower flow rate as to not take away from the splitter ram extending?

@kcpapp1 2 жыл бұрын

As a guy that now has to wear hearing aids due to loud sounds, I recommend hearing protection.

@EastonmadeWoodSplitters 2 жыл бұрын

Thanks ken. I normally try to wear ear plugs but missed them on this video. I really appreciate your concern.

@Frankzeien 2 жыл бұрын

That that is sweet, but Andrew I hate to say this I could not afford any of your machines 😔. But I watch and say maybe one day.

@Alan_Hans__ 2 жыл бұрын

Split tease :P

@savagefirewood 2 жыл бұрын

I remember the first time I found out about Eastonmade 4ish years ago and got to meet you at the Renfrew wood show. At that time and seeing one of your splitters in real life and coming from a Technical mechanical background this is a amazing piece of equipment instantly fell in love. No doubt the Eastonmade team makes the best firewood producing equipment in the world hands down. Cheers 🍻 👌🏻🔥🇨🇦

@EastonmadeWoodSplitters 2 жыл бұрын

Appreciate all the support brad. Keep being awesome!!!

@aus71383 2 жыл бұрын

Are you considering adding a diesel option to the smaller splitters as well? I know that Kohler makes some air cooled models around 10 hp

@EastonmadeWoodSplitters 2 жыл бұрын

Not likley. Most of the air cooled diesels are right at 10hp which isnt quite enought to run our pumps

@jerryfuqua3781 2 жыл бұрын

Does it have a setting for max pressure? I noticed you had to hold the lever to keep it from kicking out.

@EastonmadeWoodSplitters 2 жыл бұрын

Yes there is an adjustment for the detent

@SkidderKev 2 жыл бұрын

It's quick thats for sure! Where's the Logrite!?

@EastonmadeWoodSplitters 2 жыл бұрын

I dont think we have been able to get them. I was wrong once before

@andik859 10 ай бұрын

Wieviel Zentimeter Länge kann die Maschine spalten ? Toll mit Dieselmotor. 🍁

@thefirewooddoctor Жыл бұрын

Am wondering how well these diesel engines start in the snowy winter when you are not near a power source to run a block heater.

@EastonmadeWoodSplitters Жыл бұрын

Surprisingly really well. Havent had one not start yet

@nicholasmurano9539 Жыл бұрын

The two control levers/valves have the unique ability to stay in forward compression position , once pushed and let go , then the cylinder fully automatically extends , then automatically returns ...so you can gather another log , while one cycles. What's your term and spec request for that unique setup ? Is it " standard " ? ...or custom ?

@EastonmadeWoodSplitters Жыл бұрын

We refer to it as autocycle and is standard on a lot of our bigger splitters

@peewee.3138 2 жыл бұрын

Andrew- would that pump have enough jam to run the conveyor as well instead of the gas engine on it?

@EastonmadeWoodSplitters 2 жыл бұрын

Yes. A little different pump but we can do it

@peewee.3138 2 жыл бұрын

@@EastonmadeWoodSplitters was just wondering and with the price of fuel these days, if you can save a gallon here and a gallon there it all helps. Thanks for the reply!

@dougdodson7498 2 жыл бұрын

That's faster than greased lightning

@davdsonoftheeagerbeaver8619 2 жыл бұрын

Still love to see a box Wedge on that splitter.

@EastonmadeWoodSplitters 2 жыл бұрын

Ill try and get a video of the next one that rolls off the line with a box wedge. Appreciate the support

@albertyowell5455 Жыл бұрын

Yes, box wedge. Need it for big rounds

@clarkharms 2 жыл бұрын

Do the prices on your website reflect the splitter with the piston pump or is that an option? Current description in the pricing section shows the gear pump and 4.5 second cycle time. Really want to see what the times will be on the 37D with that pump.

@EastonmadeWoodSplitters 2 жыл бұрын

All the diesel models come standard with the piston pump.

@clarkharms 2 жыл бұрын

I know you are busy but updating the website would be a good idea since many use that as a resource, you already made a video explaining the importance of keeping your pricing on your website. Knowing what that pricing includes is the other half of the equation. In this case it involves a pump upgrade that seriously improves performance.

@kentcorbett5436 2 жыл бұрын

Good work Andrew quality machine but I thought you were building wood splitters not workout equipment that is fast you need a three-man crew to

@somedayzo6 2 жыл бұрын

Andrew I have a 22-28 on order. Love the diesel idea so how would you rate the long term reliability versus the gas motor? I know in pickups the Diesel engines are so much more expensive to repair and more prone to issues.

@EastonmadeWoodSplitters 2 жыл бұрын

The vanguard engines are rated for 2500 hours and the kubota likely closer to 25,000

@clarkharms 2 жыл бұрын

I think a lot of the problems you see with Diesel engines in road going trucks are associated with the emissions equipment that is required for the epa.

@somedayzo6 2 жыл бұрын

@@clarkharms So the kubota on this splitter would not have that emissions equipment?

@clarkharms 2 жыл бұрын

Andrew can confirm but in the USA diesel powered off road machines under 26HP are not required to have emissions equipment.

@EastonmadeWoodSplitters 2 жыл бұрын

@@clarkharms under 26hp there are no emissions. Most issues with larger engines involve the exhaust systems

@jamesrussell6870 2 жыл бұрын

If there's a faster tow behind splitter out there, someone can chime in... Otherwise this is the king of tow behind splitters!!!

@almedin7212 2 жыл бұрын

Andrew I was always curious why you guys don’t designed an in closure for your engine, it can probably keep the noise down.

@EastonmadeWoodSplitters 2 жыл бұрын

A proper enclosure would make the machine a lot wider requiring a wider axle.

@almedin7212 2 жыл бұрын

@@EastonmadeWoodSplitters if you guys ever do that as a test machine I would love to see it.

@aldredske6197 2 жыл бұрын

Hi Andrew!!😀😀 You really hit a home run with that splitter. That thing is a animal!! On the 22mb that you sent to Chris. Could you make a 6 inch taller pedestal for the seat and send it to him so we don't have to do something with raising it. I hope I'm not out of line for asking but when I was running it for him it was one of the only things I didn't like about operating it. It makes it hard to see and too reach the engine control as low as it is right now. The only other thing I was wondering about is why didn't you center the axles better so it doesn't have so much toung weight. I'm a little nervous about hooking it to the back of my 3/4 ton dodge for fear of breaking the hitch or bending the frame. Take care my friend!!😀😀 Logger Al

@EastonmadeWoodSplitters 2 жыл бұрын

We could definitely do a taller seat for sure. The axles are a tricky thing with an attached conveyor. The conveyor works more like a sail when you're going down the road and wants to lift the tongue. Thats why the axles are where they are. My cummins pulls them fine. Really appreciate all the support al

@aldredske6197 2 жыл бұрын

@@EastonmadeWoodSplitters I saw the video of you pulling the 22mb with your truck but that one had the smaller engine on it and I would be surprised if the wind from towing it would lift more than a couple hundred pounds at the most. Have you ever weighed the toung weight on one. It crushed Chris's truck completely down to the axle. Seems like it has way over 2000 pounds of toung weight. Witch is really too much for a class 3 hitch on a truck.

@EastonmadeWoodSplitters 2 жыл бұрын

@@aldredske6197 the conveyor lifts it a lot going down the road. Right around 20% tongue wieght when parked 3000-3500lbs.

@jakebredthauer5100 2 жыл бұрын

@@EastonmadeWoodSplitters The customers that Chris has like to have small pieces of wood. I don't know if 12-way knife would be better. I am thinking that a 12 way knife might be better. I am not really involved so no reply is needed.

@clarkharms 2 жыл бұрын

I wonder how much more the piston pump costs and if it would be a nice option for the gas powered splitters? In this case the 24d went from a 4.5 second cycle time to 3 seconds, a 50% improvement. People would likely pay for that kind of improvement.

@jasonpompa5430 2 жыл бұрын

The cycle time did not go down just because if the piston pump

@clarkharms 2 жыл бұрын

@@jasonpompa5430 that is the only change in specs from the older gear pump, horsepower and cylinder size remain the same. So if the only appreciable change is the pump what else could cause the increased performance?

@clarkharms 2 жыл бұрын

Are you considering making the lower section of the log lift removable? I can see this and many of your splitters being operated by two people one on the controls, one putting rounds on the lift which would be left in the up position. With that lower section in place the one putting rounds on the lift has to clear that lower section or catch their elbow/forearm on it. Also is that wheel fender removable? Looks like that forward edge is sharp and right at knee/shin height. It is an amazing machine you built but when you start moving fast enough to keep up with it accidents happen and removing some of the potential hazards is a good idea.

@EastonmadeWoodSplitters 2 жыл бұрын

We have a couple of videos of the log lifts on our machines. It actually "floats" down so there is no pressure. All the edges and corners on the fenders are well rounded and are tucked in quite a bit. Will be doing a video on the general design of the splitters before to long. Really appreciate the feedback

@jakebredthauer5100 2 жыл бұрын

@@EastonmadeWoodSplitters KINDLING MACHINE The sooner you get a kindling machine the sooner you can get some first or second hand feedback on it to help you engineer the Eastonmade model. Better than getting just one would be to get one from each firm. You have the skill to identify weaknesses. We probably have tougher trees but I expect they have already studied that issue by importing trees or exporting machines. They look to me like the next generation of splitters. Fast, low power, easy to operate, no respliting, adjustable, pieces not roughed up. If you want to stay on The Cutting Edge, I suppose that is what you will need to do. Do this project while you are still young. I see it as having a lot of potential. You are the man for the job, right? You have recent experience doing that sort of thing. I have no idea about the patent restrictions. It would be good if you could use the same parts that you already use, but I don't know whether that would be possible. I don't know much about that concrete machine but if you want to downsize, you might sell it off. The same thing with bundling machines. They don't seem to fit with what you do. You may not be good at bundling machines. Following the development of the kindling machine you will need to develop a machine to generate the rings (rounds) that go into the kindling machine. I don't know whether you could simply adapt a processor or whether you would need to design from scratch. I am not sure what is needed but I do like the circular blade. I saw a circular blade machine that has the wood stand still while the blade moves into it (like a processor). Mike Morgan gave an interesting statistic that 1% USA houses heat exclusively with wood. If that were to go up to 2%, that would be a huge increase. I suppose you could travel over to where they are built and used to take some notes. If a machine becomes obsolete, it doesn't really matter if it was made to last a long time. The price of labor will come down as we move into the economic depression.

@ncturkeycaller 2 жыл бұрын

Been trying to call for the past few days...

@EastonmadeWoodSplitters 2 жыл бұрын

We were closed yesterday and friday afternoons. Send a message tomorrow if you dont get through during business hours

@briantownsend9148 2 жыл бұрын

Really thinking of getting a ultra they look like pretty good splitter for the price you can’t beat it watched a lot of videos very impressive splitter talked to Jerry earlier hope I spelled his name right lol I’m wanting to work up to a processor is my goal wish you was coming near Ohio to a show with a ultra 😂

@EastonmadeWoodSplitters 2 жыл бұрын

We should be at the paul bunyan show in october

@briantownsend9148 2 жыл бұрын

@@EastonmadeWoodSplitters yea but unfortunately at this time sounds like the only thing left available is a axis I really like the axis but think for what I need at this time the ultra is a better fit but still thinking about it though lol

@jakebredthauer5100 2 жыл бұрын

@@briantownsend9148 I would say the Axis is more special purpose. Don't get it unless you need it. Production rate is relatively slow. I could be wrong.

@briantownsend9148 2 жыл бұрын

@@jakebredthauer5100 it looks like the cycle time is the same as ultra but no 4 way wedge available your right I think it’s more of a speciality machine it has some great features for sure but more thinking the ultra is gonna be better fit I have a old hay elevator I’ve converted to using for wood the ultra would be perfect to push the wood into it lol but still kinda in air don’t no if axis is worth the extra money to me for the “benefits”… plan is to go for the ultra and work towards a processor

@jakebredthauer5100 2 жыл бұрын

@@briantownsend9148 You didn't say why you would need one. Because you identified no reason to buy an Axis, I advise the Ultra. If you got the Ultra but never did get the processor, you would still have something that you could continue to use. What is it about the Axis that matches your wood? What is it about your wood that matches the Axis?

@maxair420 2 жыл бұрын

👍🏽

@buckinfirewood Жыл бұрын

How does this perform with a box wedge?

@EastonmadeWoodSplitters Жыл бұрын

I think i have a video of it somewhere. It does slow down a little more than the 37D. You would want to have cleaner wood for it.

@guerrydotson3213 2 жыл бұрын

What RPM do you run the diesel?

@EastonmadeWoodSplitters 2 жыл бұрын

Around 3200

@jonalmqvist9877 11 ай бұрын

Would be nice with that machine but an electric one. Here in Europe diesel and petrol are getting damn expensive

@amandadavis9726 Жыл бұрын

Just looking at this video,…again,….I just realized that you’re averaging 10 splits per minute.

@mikea4074 2 жыл бұрын

Can you run a box wedge on it?

@EastonmadeWoodSplitters 2 жыл бұрын

Yep...will try and have a video next week

@strobaholic 2 жыл бұрын

No gloves…like a Boss! 😂

@mattbrown8299 2 жыл бұрын

DUDE!! that's too fast. Andrew are you ok? You need to be an Olympic athlete to keep up with that machine for more than 10minutes. No doubt Eastonmade has the best firewood product right now. These machines are amazing to see in person. The videos are great and do some justice, but live action is fierce. I love my 12-22 and have trouble keeping up with it even with an extra hand. This 24D I think you could probably have 3-4 hands on it. @ can bring the wood to the splitter while you have 2 running the machine on either side. Just keep feeding it and feeding it. I bet you could split 4 cord an hour like that maybe more. Just amazing!!

@EastonmadeWoodSplitters 2 жыл бұрын

Appreciate the support matt