Eastonmade; 40C Processor Reveal. This Will Change Firewood Machines Forever!

Рет қаралды 13,212

3 ай бұрын

Thanks for all the feedback and support folks. It's very much appreciated. It's great that we are building such a strong community around our products where everyone can share their ideas and thoughts. Hit the like and SUBSCRIBE button if you haven't done so yet and I'll keep you in tune with what's going on in the firewood industry. Hope to see you all on the next one!!!
Give us a call for more information!!!
613-812-3213 Log Splitter Sales/Service
Check out these awesome KZfaq Channels!!!
Like our videos? Check these guys out!!!! If I missed you and you want your channel on the list drop a comment below and I'll add it on the next video.
Eastonmade Ultra
Glenn @oldschoolmillenial / oldschoolmillennial
Chris @inthewoodyard / inthewoodyard
Joe @joesfirewoodvideos / joesfirewoodvideosii
justin @lifesapprentice / @lifes_apprentice
Eastonmade Axis
Buckin billy @buckinbillyray / buckinbillyraysmith
Joe @ohiowoodburner / @ohiowoodburner
Adam @hometownacres / hometownacres
mike @KNLfirewood / @knlfirewood
Gord @gpoutdoors / gpoutdoors
Dan @armsfamilyhomestead / @armsfamilyhomestead
Brittany and Francis @BandFFirewood / @bfoutdooradventures
Neil @neilkochdigdriveDIY / @digdrivediy
Eastonmade 5-11
Gord @GPoutdoors / gpoutdoors
Eastonmade 9-16
Ben @survivingcountrylife / @survivingcountrylife7069
Paul @williamsonridgeoutdoors / williamsonridgeoutdoors
Eastonmade 12-22
Harry @thedriftlesshomestead / thedriftlesshomestead
Chuck and Deb @ironandoaksawmill / ironoaksawmill
Brade @savagefirewood / @savagefirewood
Reuben @earthandbloom / @earthandbloom
Todd @struckacordfirewood / @toddpac1
Eastonmade 22-28
Gord @GPoutdoors / gpoutdoors
Doug @offgridwithdougandstacy kzfaq.info?searc...
Eastonmade 22MB
Chris @inthewoodyard / inthewoodyard
Eastonmade 48C
Kevin @skidderkev / skidderkev
HTTPS://www.eastonmadewoodsplitters.com
#Logsplitter #firewood #logging #treecare #arborist #chainsaw #sawmill #forestry #homesteading #offgrid #heavyequipment #firewoodprocessor #logger

Пікірлер: 125

@InTheWoodyard 3 ай бұрын

I LIKE IT A LOT!

@EastonmadeWoodSplitters 3 ай бұрын

Almost like it was built just for you lol

@BertsCustomCuts 3 ай бұрын

It doesn't look like Chris could break this one.

@bwillan 3 ай бұрын

@@BertsCustomCuts Careful, Bert. Chris may take that as a challenge. LOL🤣

@BertsCustomCuts 3 ай бұрын

@@bwillan yup then I'll fix it.

@jessejones9830 3 ай бұрын

Lol yep for sure get one Chris

@ohiowoodburner 3 ай бұрын

The 40C looks AWESOME Andrew. Congrats to you and your team. I LOVE the innovation and leveraging technology. This is the type of machine our industry has been asking for...a machine that can take larger logs down to smaller splits ideal for EPA stoves, bundle wood etc.

@EastonmadeWoodSplitters 3 ай бұрын

Thanks joe! Really appreciate the feedback.

@nicholisking9272 3 ай бұрын

Joe needs some japa competition for some comparison videos;)

@cliffjenkins6419 3 ай бұрын

Crikey Joe, imagine having to stack all the wood that machine could split in a day! What a weapon!! Fantastic to watch though, but the Japa is more than I could handle I think. Cheers from HB NZ

@aldredske6197 3 ай бұрын

Hi Andrew!!😀😀 You really seem to have her dialed in. The only thing I see wrong is if your noses itches ,production comes to a halt. LOL!!🤣🤣 GOOD JOB BUDDY!!👍👍 Logger Al

@thefirewooddoctor 3 ай бұрын

Then I'm screwed during tree pollen season.

@WhiskeyRiverTradingCo 3 ай бұрын

The fully automated tease in there has me more excited than I should be 😂

@Loggeraaron1990 Ай бұрын

I need one of those I'm running my firewood business full-time with a stihl 500i a 07 gmc 1ton dump and a 27 ton troybuilt splitter

@jessejones9830 3 ай бұрын

I'll prob never be able to own one but if this ever makes its way to tn in my region,it would completely change everything down here

@lyleharkness-rv5vf 3 ай бұрын

Great machine 👍 It shows that your design team really delivered on this one. The only things missing are a camelback hydration system and a urinal so you never have to step away from the machine 😂 Seriously though - great job, can't wait to see more of this machine and to see it in person

@obiorah1 3 ай бұрын

40C is an Incredible Machine the design is much better with 2 joy sticks, The Skid steer Grapple Attachment is Nice for Customers who are in the Tree Service Industry Stay Safe in Canada,

@mikehauser9385 3 ай бұрын

Chris from In The Wood Yard could definitely make good use of that machine!

@kennethcarlson8713 3 ай бұрын

That would look really nice in my yard

@jakebredthauer5100 3 ай бұрын

What is your subscriber count?

@kennethcarlson8713 3 ай бұрын

@@jakebredthauer5100 I don't have a KZfaq channel

@ericbrinson9741 3 ай бұрын

You should build a road legal gas powered log loader trailer on 7 ton axles similar to Wallensteins 115 model

@irv2690 3 ай бұрын

I second this!

@John_Ridenour 3 ай бұрын

Wow!! Amazing machine!!

@WilleysFirewood 3 ай бұрын

I’m very impressed. This is what the industry has needed. I think you will do very well with this machine. I just may have to look at new instead of used now. This machine is a game changer!

@anthonyspadafora1384 3 ай бұрын

Beautiful piece of equipment!

@LeBlancfirewood 3 ай бұрын

Wow that thing is awsome can't wait to see it friday

@adirondackwoodsman 3 ай бұрын

Very nice Andrew, can’t wait to see it in VT.

@SimmingtonSeasonal 3 ай бұрын

Beautiful piece of machinery man!

@craiglange1781 3 ай бұрын

Nice job on the updates Andrew. That is a sweet looking machine.

@mountaintopoutdoors 3 ай бұрын

That is a pretty smooth running machine. Great job team.

@smorefirewood 3 ай бұрын

We should see you in Vermont. The processor works pretty slick. 75hp to run that saw is what the saw shop told me I would need to run a 54” saw So I guess they were correct. I sure wish I was on the other side of these innovations, meaning in the shop. I do my best designing and engineering in the shop with a scratch pad and a welding table and soapstone. I think I will be in Vermont on Friday. I will share a couple nuggets of wisdom with you there.

@EastonmadeWoodSplitters 3 ай бұрын

Looking forward to it!

@jakebredthauer5100 3 ай бұрын

slasher blade?

@smorefirewood 3 ай бұрын

@@jakebredthauer5100 more of a buzz saw blade. This is much narrower kerf

@NeighborlyHomestead 3 ай бұрын

That is a sweet machine! You guys did a nice job! - Tim

@Z-Bart 3 ай бұрын

Looks like a joy to run Andrew! I say job well done.

@davidevans474 3 ай бұрын

Looks like a nice machine 😊

@adrianphillips6238 3 ай бұрын

Hi Andrew, you make incredible splitters and should be very proud.

@wshauck9527 3 ай бұрын

A BIG WOW> What a processer.

@outdoorswithlarryrobin 3 ай бұрын

Hello Andrew, Its a beautiful machine, and simplicity rules👏🪵🇺🇸

@WestwayFirewood1313 3 ай бұрын

Amazing! If I wasn't almost retired, I would definitely be looking at this processor. It would be perfect for my size operation.

@dereksstuff8395 3 ай бұрын

That really is a great machine. I think that would be perfect for my woodlot. You guys have got the market

@cliffjenkins6419 3 ай бұрын

WOW, and it seems so easy. Lovely bit of kit Andrew,and what a great motor. Excellent design.

@skeets6060 3 ай бұрын

Ya done good boys,, yep ya done good

@fralin1966 3 ай бұрын

What a Beast Im mean come on this is pretty darn sweet !

@BertsCustomCuts 3 ай бұрын

The few things I see is to make lighter go to a 2 strand deck and shorten frame for the guys that get 100in logs like Chris.

@FrankWende Ай бұрын

It's absolutely cool and yes, I would still offer a few things! Thanks

@765Guys 3 ай бұрын

Looks awesome, around the 25 minute mark I had to check to see if I had hit the x2 time button. It looks so smooth and fast!

@GPOutdoors 3 ай бұрын

That is a work of art. Makes me want to start selling firewood. Cheers and congrats Andrew! Love the log grapple too. :)

@Gavin_outdoors331 3 ай бұрын

Looks very nice it looks way different from when it was at Bunyan could also be nice to have a seat to sit on

@jakebredthauer5100 3 ай бұрын

I need something to just back up to (assisted standing).

@TCsOutdoors1 3 ай бұрын

The 40c with the 16 way is a moneymaker for sure!

@Growing-Our-Retirement 3 ай бұрын

A little 38 special sounding music for the 40c!

@beenthere940 3 ай бұрын

The processor runs exceptionally well on its own with minimum operator input. How long do you think it will be before someone gets bored just standing there and decides that it will run on its own and tapes off the triggers? First, they'll bring a chair to sit and watch, then they will start loading the deck while it's running, and finally they will leave it running and come back to check on it once and a while. Just like Tesla cars are not totally autonomous you are always supposed to have your hands on the steering wheel. Quite the machine.

@jakebredthauer5100 3 ай бұрын

Oak Farm Firewood channel.

@1squirreldog 3 ай бұрын

I would love to rent one for the weekend set up for bigger wood .

@timroberge1498 3 ай бұрын

I just bought the tickets to the Logger Expo in Vermont!

@EastonmadeWoodSplitters 3 ай бұрын

See you there

@grantsinclair4278 3 ай бұрын

Well, I suppose if I ever wear my Axis out...lol Don't see that happening anytime soon. It's a tough piece of equipment!

@jamesminard1867 3 ай бұрын

What's on the skid steer Sir ?

@user-rg6fp4bl1t 3 ай бұрын

It could use a good comfortable seat.

@user-rh1ec6ep5x 3 ай бұрын

Yeah, but does it time travel. I bet you haven’t thought of that ? Everything else looks awesome

@fxpestoperator5527 3 ай бұрын

Top Notch ALL THE WAY Brother Andrew!!!!!!!!!!!!!!!!!!!!!!!!!!😃

@jakebredthauer5100 3 ай бұрын

If I remember he wanted to make a less expensive model.

@fxpestoperator5527 3 ай бұрын

@@jakebredthauer5100 Awesome!!!!

@jamesminard1867 3 ай бұрын

I should have watched till the end Lol

@BertsCustomCuts 3 ай бұрын

Looking good. Can you drop next log on infeed when in auto mode?

@EastonmadeWoodSplitters 3 ай бұрын

No. If its in auto mode it locks out all the other functions other than the wedge height

@SkidderKev 3 ай бұрын

Machine is looking good Andrew. Really have it dialed in now. Grapple turned out really nice too!

@EastonmadeWoodSplitters 3 ай бұрын

The grapples nice, but nor near as nice as the skidder kev special!

@SkidderKev 3 ай бұрын

@EastonmadeWoodSplitters hopefully you don't come after me for a patent infringement 🤣

@EastonmadeWoodSplitters 3 ай бұрын

@SkidderKev i have the funny feeling that we wont have to 😀

@Opinionatedguy1989 3 ай бұрын

24 ton is fine with the softwood we have in bc.

@jsanchez3818 3 ай бұрын

Nice unit. Have you ever thought about adding an air compressor to the processors? I like blow ours off after using it for the day.

@EastonmadeWoodSplitters 3 ай бұрын

Not so much on the circular saws, but we do have them on the bar saws

@waynetharp 3 ай бұрын

All of the new innovations are just awesome, but Skidder Kev is sure gonna miss his heat and AC!!😢 Is the next step in the design of this processor getting the operator station back enclosed from the elements again? Having the station separate from the unit, besides plug in go would sure take all the bouncing and vibration out of operation as well!👍

@jakebredthauer5100 3 ай бұрын

You could design one and market the plan through Eastonmade.

@nicholascooper1193 3 ай бұрын

Automation!

@richukfirewoodprocessing7108 3 ай бұрын

For the fully auto system have you considered a remote controlled system so the worker can still move about and do stuff and still be able to keep an eye on the processor? Its def a mod I would do the second its out of the warranty.

@EastonmadeWoodSplitters 3 ай бұрын

Yep. It could easily be done now. Biggest issues being operator safety.

@thomasmalloy900 3 ай бұрын

Make control panel adjustable. I think it might interest other people.

@EastonmadeWoodSplitters 3 ай бұрын

It is. I did pass over that

@EverythingElliott 3 ай бұрын

2:30 are we just going to ignore the eastonmade grapple in the background?!

@EverythingElliott 3 ай бұрын

Guess I should have just waited and continued to watch...that's what I get for jumping the gun

@iangregory5452 3 ай бұрын

This has to be one of the smartest machines yet. So many features that make it suitable for the European market, especially the operator presence system. The auto feature is great, I think you have knocked it out of the park with this machine, of course if you had one just lying around and wanted to send it over to me……..

@jakebredthauer5100 3 ай бұрын

Too heavy to ship.

@iangregory5452 2 ай бұрын

@@jakebredthauer5100 it fits inside a 40’ container so not particularly difficult

@jakebredthauer5100 2 ай бұрын

@@iangregory5452 If you are going to ship something it should be high quality, not an outdated clunker.

@jakebredthauer5100 2 ай бұрын

@@iangregory5452 Palax 750c has automatic wedge height adjustment. 2.2 second cycle time. Doesn't weigh as much and is probably cheaper. 540 Rabaud has the side-puncher type splitter.

@briancartier8711 3 ай бұрын

I’m looking at the auto and when u let off them it all stops but that’s a good feature but can be bypassed very easy by taping the triggers

@EastonmadeWoodSplitters 3 ай бұрын

I dont think it would be really necessary. Its pretty natural to just grab both controls

@steveallison7940 3 ай бұрын

Nice processor, but how would it do with hardwood? Like a Pin Oak with some knots.

@EastonmadeWoodSplitters 3 ай бұрын

Pretty good. You can upgrade the splitter to be the same as our larger models

@buckinfirewood 3 ай бұрын

You guys seem to have that dialed in.. the double infeed chain is a great way to eliminate the F..ery... I was thinking that for my little processor a couple weeks ago. Have you thought of a log optimization feature?? Measuring the length of the log and making every piece the same length to eliminate the end cut..

@EastonmadeWoodSplitters 3 ай бұрын

Havent got into any kind of optimization with it. I think it would be kinda tricky as most guys what the wood length exact

@buckinfirewood 3 ай бұрын

@EastonmadeWoodSplitters most firewood suppliers I know would rather have an end cut go to the customer... when you start hitting the bigger numbers the waste becomes unmanageable.. I myself would rather send the ends to customer but have some control a bit that it looks more like firewood not garbage .. maybe something for later.. if you measure the waste from a log I'm sure the value of selling it at the cost of a facecord at 150 is much more beneficial than selling at 50 bucks a truck load...

@EastonmadeWoodSplitters 3 ай бұрын

@@buckinfirewood thats a great point

@jakebredthauer5100 3 ай бұрын

@@EastonmadeWoodSplitters It is about time for a rebellion against the 16 inch standard. Shorter pieces: 1. split easier 2. dry faster 3. are more adapted to machine manipulation 4. burn better 5. fit smaller stoves More sawing. It is not clear which would be more expensive per cord. I suppose your thinner saw blade saves on horsepower requirements. I always thought the circular saws raising all the way was very wasteful. 40C is the remedy (and saw teach). You did not mention log size capacity. I suppose, 18 inches.

@jakebredthauer5100 3 ай бұрын

@@buckinfirewood What about a compromise? Cut some to the standard length and cut the last piece in half?

@neilmeyers5519 3 ай бұрын

Andrew, do you have any plans to build a smaller processor similar in size and price to a Timberwolf or Range Road?

@EastonmadeWoodSplitters 3 ай бұрын

We will lilley have a bar saw in the 60-70k range by the end of the summer. Be based off the bells 2000 chassis

@mikestevend1029 3 ай бұрын

What do you do with all the firewood you produce while testing all your amazing machines?

@EastonmadeWoodSplitters 3 ай бұрын

Give most of it away to the employees

@noeljbenoitii5740 3 ай бұрын

How do you discharge the cookies?

@EastonmadeWoodSplitters 3 ай бұрын

You have to reach into the chamber and remove them or pull them off fhe conveyor when they go by

@paullandry4031 3 ай бұрын

How often do you have to sharpen the saw ?

@EastonmadeWoodSplitters 3 ай бұрын

Thats yet to be determined. But i would suspect you would get a season out of it without much intervention

@bungiemia 3 ай бұрын

How do you pull out a rejected piece?

@EastonmadeWoodSplitters 3 ай бұрын

Theres a door that flips open at the splitter. It is a bit of a pain, but we need to have the gaurding there

@TheGearDriven 3 ай бұрын

Hey Eastonmade team, I have an incredible idea for a full size processor such as this. How can I contact you privately?

@EastonmadeWoodSplitters 3 ай бұрын

Send an email to gage. Hes our main engineer gage@eastonmadewoodsplitters.com

@bwillan 3 ай бұрын

How long would you expect the saw blade to say sharp? Is there an easy way to sharpen the blade? How much to replace a blade when Skidder Kev cuts through some steel? 😂

@EastonmadeWoodSplitters 3 ай бұрын

It will stay sharp as long as you dont hit anything hard. You would send this unit away to a saw shop to get re tipped